Dwyer Model SM-100 digital sound meter
14 October, 2010 | Supplied by: Dwyer Omega (Aust) Pty Ltd
The Model SM-100 digital sound meter is designed for measuring noise levels from 30 to 130 dB with accuracy of ±1.5 dB. The meter has a frequency of 31.5 Hz to 8 kHz, three different dB ranges, and a 12.5 mm condenser microphone. It has two frequency weightings - the A weighting ranges from 30 to 130 dB, while the C weighting ranges from 35 to 130 dB.
Hart 9150 thermocouple furnace
11 October, 2010 | Supplied by: TechRentals
Available to rent, the Hart 9150 thermocouple furnace can be used to check industrial thermocouples and RTD temperature probes up to 1200°C.
Peristaltic pumps for Czech mining operation
06 October, 2010
Peristaltic hose pumps supplied by Watson-Marlow Bredel are being used as part of extensive remediation activities undertaken by Diamo, a state enterprise in the Czech Republic.
Fluke unites calibration group, acquires Russka and Pressurements from GE
28 September, 2010 | Supplied by: Fluke Australia Pty Ltd
Fluke Corporation is consolidating its six calibration product lines under a single logo - Fluke Calibration.
igus C-Chain continually rotating energy chain
17 September, 2010 | Supplied by: Treotham Automation Pty Ltd
igus has developed the first continually rotating energy chain - a complete ready-to-install module that eliminates ‘wasted run’ or non-productive return run movements.
Treotham Automation twistable fibre bus cables
17 September, 2010 | Supplied by: Treotham Automation Pty Ltd
Twistable fibre bus cables suitable for the most popular industrial bus systems (Profibus, CANbus, industrial ethernet) are now available from Treotham Automation. Torsion-resistant materials are used for the cable insulation, which is always extremely sensitive in such bus system cables. In addition, the cables are protected by damping elements and a matching PTFE gliding layer.
Davey Water Products adopts Australian-made logo
07 September, 2010
With more than 70% of its product range manufactured at the company’s Melbourne facilities, Davey Water Products has been inducted into the Australian Made Australian Grown industry support program.
Slurry pump for mining industry
31 August, 2010 | Supplied by: KSB Australia Pty Ltd
Mining companies seeking an efficient way to handle abrasive slurry can now use KSB/GIW Industries' ZW Vertical Slurry Pump Series which is claimed to provide an economical solution for vertical sump requirements.
Schaffner Sinusoidal FN5040/45 drive output filters
23 August, 2010 | Supplied by: NHP Electrical Engineering Products Pty Ltd
The Schaffner Sinusoidal FN5040/45 output filters are designed to ensure cooler and more reliable drives. As well as offering the capacity to prevent premature failures and expensive downtime, they are matched to the technical requirements of modern drive systems reducing the extra losses experienced in AC motors.
Circutor CVM-NRG 96 three-phase power analyser
23 August, 2010 | Supplied by: Eaton Electrical (Australia) Pty Ltd
The Circutor CVM-NRG 96 is a three-phase power panel analyser that displays and transmits all electrical parameters metered or calculated. It is suitable for supporting utility and commercial metering, power generation sites and campuses, sub-metering, load studies and voltage recording, as well as being an all-in-one analog meter replacement.
Harting Han-Compact metal hood
23 August, 2010 | Supplied by: Soanar Limited
Harting’s Han-Compact metal hood with different cable entry directions is suitable for all contact inserts of the Han-Compact size.
Indukey InduMouse washable PC mouse
23 August, 2010 | Supplied by: Backplane Systems Technology Pty Ltd
Indukey’s InduMouse is a rugged IP68-rated PC mouse that is silicone covered making it completely washable and easily disinfected.
Samtec AccliMate sealed ethernet cable plug and receptacle system
23 August, 2010 | Supplied by: Soanar Limited
Samtec has recently expanded its line of sealed interconnect systems with the AccliMate sealed rectangular ethernet cable plug and receptacle. The system is designed for industrial and other harsh environments with a silicon seal that meets IP68 specifications for dust and waterproof sealing.
Harmonic Drive gears
17 August, 2010 | Supplied by: Acrodyne Pty Ltd
The Harmonic Drive operating principle allows high reduction ratios with concentric shafts and with no backlash and vibration. It is based on a simple construction comprising three components: Wave Generator, Flexispline, and Circular Spline.
Zupera SS-KB-SH Series stainless steel shelf keyboards
17 August, 2010 | Supplied by: Interworld Electronics and Computer Industries
The SS-KB-SH Series stainless steel shelf keyboards from Zupera are mounted in a custom-designed brushed stainless steel shelf enclosure. Specifically designed for harsh kiosk and industrial environments, these input devices have wipe-clean fascias and key-tops and can meet IP68 static or IP65 specifications when moving (key pressed or trackball rotating).
