RSM-8Rx Series console management switch with remote power reboot
21 March, 2011 | Supplied by: Interworld Electronics and Computer Industries
The RSM-8Rx Series switches provide secure remote access to RS232 console ports and the ability to power cycle remote IT equipment. Two models are available. The RSM-8R4 provides eight RJ45 serial ports and four IEC reboot power outlets while the RSM-8R8 provides eight RJ45 serial ports and eight reboot power outlets.
Land Instruments Vessel Manager thermal monitoring system
21 March, 2011 | Supplied by: OneTemp Pty Ltd
A system that monitors temperature change over the entire surface of molten metal ladles has been introduced by Land Instruments. The Vessel Manager’s software and hardware help assure plant safety by warning of potential break-outs and provide trending data to establish efficient relining schedules.
C&K Components RAFIX 22 FS Series universal quick-connect switches
21 March, 2011 | Supplied by: Soanar Limited
The RAFIX 22 FS Series of low-profile, universal quick-connect switches from C&K Components support a modular installation concept, allowing the switches to be plugged into the panel and locked firmly into place, simplifying both assembly and maintenance.
Turck Cat-6 RJ45 field-wireable connectors
21 March, 2011 | Supplied by: Turck Australia Pty Ltd
Turck has announced Cat-6 RJ45 field-wireable connectors that provide a simple and secure way to extend an ethernet cable in the field. Whether connecting a peripheral device, repairing or replacing a cable link, or extending the network cable, the field wireable connectors allow an on-site assembly with no special tools for up to 10 Gigabit Ethernet networks.
Fujifilm Prescale pressure measurement film
04 March, 2011 | Supplied by: Bestech Australia Pty Ltd
Prescale pressure measurement film enables the distribution of pressure applied to web material tensioned over rollers to be examined and analysed. This pressure distribution film uses microscopic ink-filled capsules embedded in the surface of the film. The rupturing of the capsules is dependent on the amount and location of the pressure applied by the roller(s) to the film and, accordingly, to the web material. As the capsules rupture, they deposit a red trace on the film. The intensity of the trace indicates the location and distribution of the pressure applied to the web by the rollers. Therefore, the pressure film indicates if and where the roller(s) need to be corrected to improve the quality of the web material.
Yokogawa CA450 process multimeter
25 February, 2011 | Supplied by: Yokogawa Australia Pty Ltd
The Yokogawa CA450 process multimeter can also act as a calibrator for electrical and process measurements. With functions for repair, maintenance and troubleshooting of plant equipment, the CA450 is a single-unit, on-site tool that is designed to help accomplish tasks that have traditionally required two on-site measuring instruments.
Beamex MC5 multifunction NATA calibrator
14 February, 2011 | Supplied by: TechRentals
Available to rent, the Beamex MC5 multifunction NATA calibrator provides calibration capability for pressure, temperature, electrical and frequency signals and can be used as a field-entry device (FED), allowing for the recording of non-calibration related maintenance results.
Lumberg Automation 8-pole M8 actuator/sensor connectors
17 January, 2011 | Supplied by: Belden Australia Pty Ltd
Lumberg Automation’s 8-pole M8 actuator/sensor connectors are being offered in two variants with moulded cables as well as in three field-attachable installation variants.
Lumberg Automation Profibus DP connectors
17 January, 2011 | Supplied by: Belden Australia Pty Ltd
Lumberg Automation Profibus DP connectors each have a D-sub and M12 interface, and are offered with 35, 90 or 180° cable outlets.
WIKA CEP6000 portable multifunction calibrator
10 January, 2011 | Supplied by: WIKA Australia
Despite its compact design and robust construction, the CEP6000 offers the functionality, accuracy and reliability of fixed installation laboratory equipment and is ideally suited for on-site use.
Harting wins international design award
02 January, 2011 | Supplied by: HARTING Pty Ltd
The Han-Yellock connector has taken the iF product design award 2011.
Raytek Pi20 thermal imaging camera
20 December, 2010 | Supplied by: ECEFast
The Raytek Pi20 thermal imaging camera has a full resolution of 320 x 240 pixels at 30 Hz and covers temperatures from -40 to 2000°C in two different models. Communications are via ethernet, with support for up to 16 cameras from one PC, and the Datatemp software allows for 64 AOI [areas of interest] to be defined with data recording, or control actions attached to each AOI. Analog and digital outputs are generated by I/O modules on the ethernet LAN, with functions being selectable during system configuration.
Wieland Electric wipos PB1 power supplies
20 December, 2010 | Supplied by: Treotham Automation Pty Ltd
Low installation height and narrow installation spaces are often found in small distribution boards, shunting distributors and control cabinet applications.
Turck 3- and 4-branch M16 tees
20 December, 2010 | Supplied by: Turck Australia Pty Ltd
Turck has introduced h-style (3-branch) and H-style (4-branch) M16 tees, designed for saving field installation time and hassle in comparison to hardwired cable tray installations. The tees are available in various configurations, including tees with a male connector on either side of the trunk line, integral connections or cable drops.
Belden 7958A and 7957A Cat 5e industrial Ethernet cables
20 December, 2010 | Supplied by: Belden Australia Pty Ltd
Belden has added two 600 V AWM-rated, shielded cables to its DataTuff industrial ethernet range.
