Dodge Grid-Lign couplings size 1200T
20 December, 2010 | Supplied by: Baldor Australia Pty Ltd
Dodge Grid-Lign couplings now include size 1200T to provide solutions for attaching shafts from 1.27 to 33 cm. Torque capacity ranges from 52 to 186,425 Nm.
Belden Infinity C-TC+ and FCC cables enhanced
20 December, 2010 | Supplied by: Belden Australia Pty Ltd
Belden has announced a series of enhancements to its Infinity C-TC+ and FCC cables. With the addition of Belflex jackets, these cables offer improved flexing capabilities, resistance to sunlight, oil and abrasion, and the ability to withstand temperature ranges of -40 to +90°C (cold impact) and -50 to +90°C (cold bend).
Dodge ISN end covers
20 December, 2010 | Supplied by: Baldor Australia Pty Ltd
A range of end covers has been introduced to the Dodge ISN bearing range. They are designed to provide an additional barrier to contamination in harsh applications.
Raytek Pi20 thermal imaging camera
20 December, 2010 | Supplied by: ECEFast
The Raytek Pi20 thermal imaging camera has a full resolution of 320 x 240 pixels at 30 Hz and covers temperatures from -40 to 2000°C in two different models. Communications are via ethernet, with support for up to 16 cameras from one PC, and the Datatemp software allows for 64 AOI [areas of interest] to be defined with data recording, or control actions attached to each AOI. Analog and digital outputs are generated by I/O modules on the ethernet LAN, with functions being selectable during system configuration.
Turck 3- and 4-branch M16 tees
20 December, 2010 | Supplied by: Turck Australia Pty Ltd
Turck has introduced h-style (3-branch) and H-style (4-branch) M16 tees, designed for saving field installation time and hassle in comparison to hardwired cable tray installations. The tees are available in various configurations, including tees with a male connector on either side of the trunk line, integral connections or cable drops.
Alignment-free drives for gold expansion project
29 November, 2010 | Supplied by: Bonfiglioli Transmission Pty Ltd
LGL is undertaking a major upgrade of its Lihir Island gold operation in New Ireland province of Papua New Guinea. The upgrade will increase the total annual gold production by about 240,000 ounces to approximately 1 million ounces per annum from 2011.
Jellyfish-inspired pumps
18 November, 2010
The undulations of the jellyfish hold secrets that may make possible a new generation of tiny pumps for medical applications and soft robotics.
Watson-Marlow 520Bp, 620Bp and 720Bp Profibus-enabled pumps
01 November, 2010 | Supplied by: Watson-Marlow Fluid Technology Solutions
Watson-Marlow Pumps has launched three IP66-rated peristaltic pumps with certified Profibus DP networking capabilities, the 520Bp, 620Bp and 720Bp.
Vanton Sump-Gard model SGK PY800SP sump pump
01 November, 2010 | Supplied by: Acromet (Aust) Pty Ltd
The Sump-Gard model SGK PY800SP thermoplastic pump from Vanton features a close-coupled, cantilevered shaft that reduces headroom requirements and eliminates immersed bearings.
ITT Lowara e-SV stainless steel, vertical multistage pumps
01 November, 2010 | Supplied by: Xylem Applied Water Systems Australia Pty Ltd
Lowara e-SV stainless steel, vertical multistage pumps are claimed to feature innovative hydraulic design and efficiency characteristics that significantly lower life-cycle costs, with increased energy savings and are suited for a wide variety of commercial and industrial applications.
Gates Quad-Power III notched raw- edge narrow section V-belts
01 November, 2010 | Supplied by: Gates Australia Pty Ltd
Gates Quad-Power III is a range of notched raw-edge narrow section V-belts, designed to deliver higher power ratings, increased trouble-free service life and reduced energy consumption.
FEAS SNT230-K series switch-mode power supplies
29 October, 2010 | Supplied by: Automated Control Pty Ltd
The switch-mode power supplies of the FEAS SNT230-K series are claimed to be powerful and robust devices for power-sensitive loads in industrial environments.
SI Instruments mini TehloTest bottle-capping force tester
29 October, 2010 | Supplied by: SI Instruments
The mini TehloTest can be used for measuring head load force in capping machines. The wireless edition of the head load tester is now available in a miniaturised size suitable for small bottles, at 42 mm in diameter and 101 mm tall.
Hirschmann CA series connectors
29 October, 2010 | Supplied by: Belden Australia Pty Ltd
The Hirschmann CA series industrial circular connectors, the, which were previously only available in black, are now also available in red, white and blue.
Banner Engineering Ez-Light K80 call light
29 October, 2010 | Supplied by: Micromax Pty Ltd
Banner Engineering has introduced the Ez-Light K80 call light, designed to optimise productivity in flexible manufacturing environments. The call light is a simple solution for keeping parts bins stocked and the assembly line productive: it emits a flashing red signal from a large 50 mm dome - visible from 180 degrees - to notify stocking personnel when parts bin supplies must be replenished. This notification ensures parts bins are refilled before supplies are gone, allowing assembly and manufacturing line operators to sustain production.
