FEAS Accupack LDR4012 and LDR4024 buffered power supplies
24 March, 2010 | Supplied by: Automated Control Pty Ltd
FEAS Accupack LDR4012 and LDR4024 are made with charging regulators and serve to buffer 12 and 24 V systems. The Accupack LDR is designed to be connected between the line voltage and the installation in order to provide DC to the equipment. In the event of a mains power failure, the onboard sealed batteries supply the system, connected to the outlet. The supply duration depends on the load current of the consumer. The batteries can be easily replaced if necessary.
Eldon Multi-Flex floor-standing enclosures
24 March, 2010 | Supplied by: NHP Electrical Engineering Products Pty Ltd
The Multi-Flex range of floor-standing enclosures from Eldon is claimed to be one of the most technically advanced products available due to its design and extensive mounting possibilities that save installation time.
Metal Work Pneumatic Pneumo-Power pneumatic power supply
10 March, 2010 | Supplied by: Metal Work Pneumatic Australia Pty Ltd
Pneumo-Power is a product that incorporates an electric generator powered either by exhaust air (reduced environmental impact) or a compressed air supply to create 24 VDC locally where wiring may be costly or impractical to install.
Turck 7/8-16UN explosion-proof feed-through receptacle
10 March, 2010 | Supplied by: Turck Australia Pty Ltd
The 7/8-16UN minifast explosion-proof feed-through receptacle is CSA certified as a secondary conduit seal. This quick-disconnect solution can serve as a secondary conduit seal to prevent gas migration or as a boundary seal, when used with a Turck CSA certified cordset. The receptacle may be applied in Class I, Division 2 locations without the use of intrinsically safe circuits or in Class I, Division 1 locations with intrinsically safe circuits.
Belden PowerCinch modular power distribution system
10 March, 2010 | Supplied by: Belden Australia Pty Ltd
Belden has introduced PowerCinch, a modular power distribution and motor control connection system for machinery applications that has been developed under the Lumberg Automation brand.
E+H FieldCare first certified FDT frame
08 March, 2010 | Supplied by: Endress+Hauser Australia Pty Ltd
FieldCare, Endress+Hauser’s plant asset management tool, is the first FDT frame to pass the FDT Group’s conformance test.
Merger creates FLIR Commercial Systems
02 March, 2010 | Supplied by: Teledyne FLIR
FLIR is to merge its Commercial Vision Systems and Thermography divisions to create FLIR Commercial Systems.
SEW launches Australian-assembled gear-units
01 March, 2010 | Supplied by: SEW-Eurodrive Pty Ltd
Following an upgrade to its Melbourne-based assembly facility, SEW-Eurodrive has launched its Australian-assembled X-Series industrial gear-unit range, resulting in reduced gear-unit turnaround times.
InduKey InduProof Advanced Series IP68 keyboards
15 February, 2010 | Supplied by: Backplane Systems Technology Pty Ltd
InduKey’s InduProof Advanced Series of IP68 industrial keyboards offer a completely sealed mouse button or touchpad as a pointing device plus 102 alphanumeric input keys.
Teralba Coilflo miniature heat exchangers
07 February, 2010 | Supplied by: Teralba Industries Pty Ltd
Teralba Industries have released a miniature heat exchanger for the heating, sterilising or cooling of any fluid stream, liquid sample or pumpable product.
ABB ACS 2000 air-cooled AC drive
07 February, 2010 | Supplied by: ABB Australia Pty Ltd
The ACS 2000 air-cooled general-purpose AC drive is designed for reliability, easy installation and fast commissioning. The drive is specifically targeted at fan, pump, compressor and other common applications in industries such as water, cement, minerals and mining, metals, oil and gas, pulp and paper, power generation and chemical.
CAMI cable testing systems
07 February, 2010 | Supplied by: Emona Instruments Pty Ltd
CAMI cable testing systems cover basic continuity measurement, continuity measurement with resistance and high voltage testing. All models offer live graphic wiring display of the measured cable, an online cable database, schematic and label printing, data logging and a built-in scripting system for automatic control and production testing.
Dunkemotorwen brushless DC servo motors with Profibus DP
07 February, 2010 | Supplied by: M Rutty & Co Pty Ltd
Dunkemotorwen brushless DC servomotors are now available with a Profibus DP interface.
Wago 857 Series Jumplex transducer and relay modules
07 February, 2010 | Supplied by: NHP Electrical Engineering Products Pty Ltd
The Wago 857 Series Jumplex transducer and relay modules have a compact design, with 6.0 mm width, and can operate over a temperature range from -25 to 70°C.
Casio EX-FI high-speed digital camera
02 February, 2010 | Supplied by: http://www.techrentals.com.au
TechRentals has introduced the Casio EX-FI High Speed Digital Camera into its test and measurement rental fleet.
