Alignment-free drives for gold expansion project
29 November, 2010 | Supplied by: Bonfiglioli Transmission Pty Ltd
LGL is undertaking a major upgrade of its Lihir Island gold operation in New Ireland province of Papua New Guinea. The upgrade will increase the total annual gold production by about 240,000 ounces to approximately 1 million ounces per annum from 2011.
Jellyfish-inspired pumps
18 November, 2010
The undulations of the jellyfish hold secrets that may make possible a new generation of tiny pumps for medical applications and soft robotics.
ITT Lowara e-SV stainless steel, vertical multistage pumps
01 November, 2010 | Supplied by: Xylem Applied Water Systems Australia Pty Ltd
Lowara e-SV stainless steel, vertical multistage pumps are claimed to feature innovative hydraulic design and efficiency characteristics that significantly lower life-cycle costs, with increased energy savings and are suited for a wide variety of commercial and industrial applications.
Vanton Sump-Gard model SGK PY800SP sump pump
01 November, 2010 | Supplied by: Acromet (Aust) Pty Ltd
The Sump-Gard model SGK PY800SP thermoplastic pump from Vanton features a close-coupled, cantilevered shaft that reduces headroom requirements and eliminates immersed bearings.
Gates Quad-Power III notched raw- edge narrow section V-belts
01 November, 2010 | Supplied by: Gates Australia Pty Ltd
Gates Quad-Power III is a range of notched raw-edge narrow section V-belts, designed to deliver higher power ratings, increased trouble-free service life and reduced energy consumption.
Watson-Marlow 520Bp, 620Bp and 720Bp Profibus-enabled pumps
01 November, 2010 | Supplied by: Watson-Marlow Fluid Technology Group
Watson-Marlow Pumps has launched three IP66-rated peristaltic pumps with certified Profibus DP networking capabilities, the 520Bp, 620Bp and 720Bp.
Banner Engineering Ez-Light K80 call light
29 October, 2010 | Supplied by: Micromax Pty Ltd
Banner Engineering has introduced the Ez-Light K80 call light, designed to optimise productivity in flexible manufacturing environments. The call light is a simple solution for keeping parts bins stocked and the assembly line productive: it emits a flashing red signal from a large 50 mm dome - visible from 180 degrees - to notify stocking personnel when parts bin supplies must be replenished. This notification ensures parts bins are refilled before supplies are gone, allowing assembly and manufacturing line operators to sustain production.
Hirschmann CA series connectors
29 October, 2010 | Supplied by: Belden Australia Pty Ltd
The Hirschmann CA series industrial circular connectors, the, which were previously only available in black, are now also available in red, white and blue.
FEAS SNT230-K series switch-mode power supplies
29 October, 2010 | Supplied by: Automated Control Pty Ltd
The switch-mode power supplies of the FEAS SNT230-K series are claimed to be powerful and robust devices for power-sensitive loads in industrial environments.
SI Instruments mini TehloTest bottle-capping force tester
29 October, 2010 | Supplied by: SI Instruments
The mini TehloTest can be used for measuring head load force in capping machines. The wireless edition of the head load tester is now available in a miniaturised size suitable for small bottles, at 42 mm in diameter and 101 mm tall.
Dwyer Model SM-100 digital sound meter
14 October, 2010 | Supplied by: Dwyer Instruments (Aust) Pty Ltd
The Model SM-100 digital sound meter is designed for measuring noise levels from 30 to 130 dB with accuracy of ±1.5 dB. The meter has a frequency of 31.5 Hz to 8 kHz, three different dB ranges, and a 12.5 mm condenser microphone. It has two frequency weightings - the A weighting ranges from 30 to 130 dB, while the C weighting ranges from 35 to 130 dB.
Hart 9150 thermocouple furnace
11 October, 2010 | Supplied by: TechRentals
Available to rent, the Hart 9150 thermocouple furnace can be used to check industrial thermocouples and RTD temperature probes up to 1200°C.
Peristaltic pumps for Czech mining operation
06 October, 2010
Peristaltic hose pumps supplied by Watson-Marlow Bredel are being used as part of extensive remediation activities undertaken by Diamo, a state enterprise in the Czech Republic.
Fluke unites calibration group, acquires Russka and Pressurements from GE
28 September, 2010 | Supplied by: Fluke Australia Pty Ltd
Fluke Corporation is consolidating its six calibration product lines under a single logo - Fluke Calibration.
igus C-Chain continually rotating energy chain
17 September, 2010 | Supplied by: Treotham Automation Pty Ltd
igus has developed the first continually rotating energy chain - a complete ready-to-install module that eliminates ‘wasted run’ or non-productive return run movements.
