Equipment

Calibration pressure output controller

26 October, 2009 | Supplied by: AMS Instrumentation & Calibration Pty Ltd

The Beamex POC6 is an automatic pressure output controller, providing regulated output from vacuum to 70 bar (1015 psi). The POC6 can be used as a standalone pressure controller or integrated to the Beamex calibration system.


Thermal imaging camera

26 October, 2009 | Supplied by: Infratherm Pty Ltd

The NEC H2640 thermal imaging camera has a temperature resolution of 0.03 °C providing exceptional sensitivity. The uncooled 640 x 480 focal plane array detector delivers a 0.6 mrad instantaneous field of view with the standard 22º (H) x 16º (V) lens.


Digital tachometer

26 October, 2009 | Supplied by: SI Instruments

The Rotaro digital handheld tachometer from RheinTech has two measuring methods; the non-contact optical method measures up to 99,999 rpm and the mechanical method, using an adapter and various probes, measures up to 19,999 rpm.


Pneumatic torque limiter

26 October, 2009 | Supplied by: Norman G Clark Pty Ltd

The Nexen TL Series pneumatically engaged, single-position torque limiter uses a ball/detent interface and proximity sensor to immediately disengage the machine shaft when excessive torque or a machine jam occurs, effectively protecting downstream equipment and product from damage and decreasing downtime.


High power drives

26 October, 2009 | Supplied by: Schneider Electric

Schneider Electric’s Altivar 61 Plus and Altivar 71 Plus are low-voltage variable speed drives for high power ratings, from 90 kW to 2400 kW, and are designed for simplicity of operation.


Recycling gets a concrete solution

24 October, 2009 | Supplied by: SEW-Eurodrive Pty Ltd

There was a time when this building rubble would end up as landfill, but more recently new waste minimisation strategies have emerged. Here, concrete recycling processes are proving extremely valuable, both economically and environmentally.


Ethernet cordsets and patch cords

20 October, 2009 | Supplied by: Belden Australia Pty Ltd

The improved ranges of Hirschmann industrial ethernet cordsets and patch cords are chemical and temperature resistant and incorporate rugged RJ45 connection technology with the proven industrial over-moulded Micro (M12) connection technology, which is IP67 rated and typically found in sensor/actuator machine applications. This ensures reliable performance in extreme and mission-critical environments.


Electric pressure calibrator

19 October, 2009 | Supplied by: http://www.techrentals.com.au

TechRentals has introduced the Fluke 719 Electric Pressure Calibrator into their test and measurement rental fleet.


Building a reliable VFD system

16 October, 2009 by Brian Shuman, Senior Product Development Engineer, Belden | Supplied by: Belden Australia Pty Ltd

A variable frequency drive (VFD) regulates the speed of a three-phase AC electric motor by controlling the frequency and voltage of the power it delivers to the motor.


Pipeline testing, maintenance and safety

14 October, 2009 | Supplied by: Air Springs Supply Pty Ltd

Maintenance of pipelines can be a tricky business. Sealing and testing operations need to be conducted not only with complete safety and environmental security but also with considerable speed, to maintain flows of liquids and gases.


Cooling water pump for Saudi Arabia

14 October, 2009 | Supplied by: KSB Australia Pty Ltd

KSB Germany is set to deliver a huge vertical tubular casing pump for an intake structure in Saudi Arabia. Driven by a powerful and energy-efficient 4200 kW synchronous motor, the SEZA 24-160 pump unit will handle more than 16,000 L of seawater per second. The water will be pumped into a piping system to supply Yanbu’s industrial park.


CIP piston and lobe pump

12 October, 2009 | Supplied by: IDEX

Wright Flow Technologies has introduced the Revolution,a clean in place (CIP) hybrid circumferential piston and lobe pump.


Energy-saving software tool

12 October, 2009 | Supplied by: Baldor Australia Pty Ltd

Baldor has released a software estimating tool that enables users to evaluate the energy efficiency of electric motors and variable speed drives. Known as BE$T, the Baldor Energy Savings Tool can be downloaded from the company’s website. The software analyses the efficiency and annual electricity usage of usersÂ’ existing motors and calculates the cost savings that can be achieved by replacing them with equivalent higher-efficiency models. Built-in motor performance and pricing information enables the software to suggest optimum replacements and to estimate the investment payback period.


DIN rail power supplies

29 September, 2009 | Supplied by: Powerbox Australia Pty Ltd

The PBAMR Series 10-92W is a range of Class II output DIN rail switching power supplies suited to building automation, factory automation, semiconductor fabrication equipment, marine installation and electromechanical applications with medium to high power demand. The series is available in 7.5, 15, 22.5 and 35 W models.


SDR-120 DIN rail power supply

29 September, 2009 | Supplied by: ADM Instrument Engineering Group

The Mean Well SDR-120 is an AC/DC isolation Class I DIN rail power unit.


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd