Wago 857 Series Jumplex transducer and relay modules
07 February, 2010 | Supplied by: NHP Electrical Engineering Products Pty Ltd
The Wago 857 Series Jumplex transducer and relay modules have a compact design, with 6.0 mm width, and can operate over a temperature range from -25 to 70°C.
ABB ACS 2000 air-cooled AC drive
07 February, 2010 | Supplied by: ABB Australia Pty Ltd
The ACS 2000 air-cooled general-purpose AC drive is designed for reliability, easy installation and fast commissioning. The drive is specifically targeted at fan, pump, compressor and other common applications in industries such as water, cement, minerals and mining, metals, oil and gas, pulp and paper, power generation and chemical.
Casio EX-FI high-speed digital camera
02 February, 2010 | Supplied by: http://www.techrentals.com.au
TechRentals has introduced the Casio EX-FI High Speed Digital Camera into its test and measurement rental fleet.
Prevent 24 VDC overloads from stopping production
30 January, 2010 by Kai Bronzel | Supplied by: Siemens Ltd
Along with the laws of physics, engineers have to be aware of the law of unintended consequences. Take, for example, something as simple as the 24 VDC power supplies that feed the control circuits in automation systems as a case in point.
SEW-Eurodrive electromagnetic disk brakes
25 January, 2010 | Supplied by: SEW-Eurodrive Pty Ltd
SEW-Eurodrive has released a range of motor-integrated electromagnetic disk brakes that can be customised to match the specific torque and voltage requirements for a wide variety of electric motor applications.
Emona to distribute CAMI cable test system
25 January, 2010 | Supplied by: Emona Instruments Pty Ltd
Emona Instruments has been appointed distributor of the CableEye range of PC-based cable test systems.
Bonfiglioli HD AFD alignment-free drive combinations
22 January, 2010 | Supplied by: Bonfiglioli Transmission Pty Ltd
Bonfiglioli has introduced an alignment-free configuration on its heavy-duty gear drives that cost-effectively integrates motor and gearbox. The HD AFD is intended to offer an alternative to laser-aligned baseplate types that allow the use of close-coupled IEC B5 flange mounted motors up to a G315 frame size.
Sinamics G150 Clean Power frequency converter
15 January, 2010 | Supplied by: Siemens Ltd
The Sinamics G150 Clean Power frequency converter from Siemens is designed to provide an energy-efficient drive with high power rating for fans, pumps and compressors or extruders, mixers and mills. The converter also reduces low-frequency harmonic effects on the system and thus fulfils the high requirements for current and voltage quality placed on mains supplies.
Banner Engineering BWA-SOLAR-001 FlexPower solar supply
15 January, 2010 | Supplied by: Micromax Pty Ltd
Banner Engineering has released the FlexPower solar supply, BWA-SOLAR-001, specifically designed for powering SureCross wireless network devices.
Turck BL Compact modular I/O system
15 January, 2010 | Supplied by: Turck Australia Pty Ltd
Turck’s BL Compact system is a modular I/O solution for collecting a variety of signals in a single, rugged node on a network. Rather than routing all signals through a control cabinet, this device makes it possible to obtain analog, digital, thermocouple, RTD, serial, RFID or a mixture of signal types in a compact, on-the-machine device over DeviceNet, CANopen and Profibus-DP.
Oz Seals Quattro Seal
15 January, 2010 | Supplied by: Oz Seals
Oz Seals has developed the heavy-duty Quattro Seal that is designed to be twice as safe as a standard seal. With lower leakage and failure rates, the Quattro seal is suitable for heavy-duty hydraulic and pneumatic applications.
DH Instruments PPC4 precision pressure calibrator
15 January, 2010 | Supplied by: Fluke Australia Pty Ltd
The DH Instruments division of Fluke Corporation has an enhancement to its PPC4 precision pressure controller/calibrator product line. PPC4 is a high-performance pressure calibrator for testing pneumatic pressure instruments. It is designed to provide versatility and ease of use in calibration labs and manufacturing environments.
The safest way to calibrate fieldbus instruments
14 January, 2010 | Supplied by: AMS Instrumentation & Calibration Pty Ltd
Fieldbus transmitters must also be calibrated just like conventional instruments, and there are also industrial environments where the calibration of fieldbus instruments should not only be made accurately and efficiently, but also safely.
Pumps for Chinese effluent treatment plants
09 December, 2009 | Supplied by: KSB Australia Pty Ltd
In August this year, the KSB Group signed a framework agreement covering the supply of pumps and mixers for 52 municipal effluent treatment plants in China. The order is for a total of 335 mixers and 466 wastewater pumps of different types and sizes.
Nexen roller pinion system
23 November, 2009 | Supplied by: Norman G Clark Pty Ltd
Nexen has announced an enhanced roller pinion system (RPS), providing high-accuracy linear positioning with zero backlash and simple installation in precision motion control applications.
