Instrumentation

pH electrode management system

05 October, 2008 | Supplied by: Endress+Hauser Australia Pty Ltd

Memobase is an electrode management system for pH electrodes that is designed to give users insight into their reliability, performance and estimated lifetime.


Magnetic inductive flowmeter

05 October, 2008 | Supplied by: Kobold Instruments Pty Ltd

The DMI series flowmeter operates on the magneto-inductive principle. With no protrusions into the pipe, conductive liquids and slurries can be measured with virtually no system pressure loss. The DMI is available with a PEEK or PVDF flow tube and Hastelloy C measuring electrodes are standard.


Gas chromatograph

05 October, 2008 | Supplied by: Siemens Ltd

The Sitrans CV process gas chromatograph based on micro-technology rapidly and precisely determines the calorific value of natural gas. The main use of Sitrans CV is for custody transfer of natural gas.


Variable area flowmeters

05 October, 2008 | Supplied by: Swagelok

Swagelok variable area flowmeters (VAFs) are used to measure liquid and gas flow rates by means of a tapered tube and float and can provide highly accurate measurement with individually calibrated scales and a 10:1 turndown ratio.


Hygienic flowmeters

05 October, 2008 | Supplied by: ABB Australia Pty Ltd

The HygienicMaster range of flowmeters is targeted primarily at the food and beverage, pharmaceutical and biotechnology industries. The range provides accurate measurement in hygienic applications ranging from water through to fluids with extreme viscosities, high solid concentrations or low conductivity.


Flow sensor for solids

05 October, 2008 | Supplied by: SWR Engineering Messtechnik Pty Ltd

FlowJam is a non-contact flow/no flow sensor for solids. It uses microwave technology to give reliable results under harsh conditions of dust and sunlight. It is a suitable device for detecting solid flows in hoppers, conveyors, screw conveyors, air slides, etc.


Schmidt flow sensor

05 October, 2008 | Supplied by: Pacific Rim Technical Services

The Schmidt flow sensor SS 20.260 offers a measuring range of 0-50 m/s and an operating temperature range of up to 120°C. The temperature can be measured with an additional linear output, and a separate temperature sensor is not required. The unit has a robust construction to protect it against impact.


Pressure transmitters

05 October, 2008 | Supplied by: AMS Instrumentation & Calibration Pty Ltd

The AT9000 advanced transmitter from Yamatake is a microprocessor-based smart transmitter that features high performance and good stability. Capable of measuring gas, liquid, vapour and liquid levels, it transmits 4-20 mA DC analog and digital signals according to the measured differential pressure.


Temperature and humidity sensors

05 October, 2008 | Supplied by: W&B Instruments Pty Ltd

Delta Ohm has released a series of analog and digital temperature and humidity transmitters. The HD9817 series feature compact self-contained transmitters with analog (0-1 V) and digital (RS232 and USB) outputs.


Fluid property analyser

05 October, 2008 | Supplied by: Thermal Component Technologies

The Fluid Property Analyser (FPA) is an innovative and robust sensor designed and manufactured by Measurement Specialties which simultaneously and directly measures the viscosity, density, dielectric constant and temperature of fluids.


Flow meter

05 October, 2008 | Supplied by: ABB Australia Pty Ltd

Part of ABB’s FlowMaster family, ProcessMaster incorporates features providing users enhanced performance with reduced complexity. Available in sizes 3 to 2000 mm, the ProcessMaster range offers a wide choice of liner and electrode options, enabling it to meet the needs of demanding applications.


Vibrating fork level switch

01 October, 2008 | Supplied by: Kobold Instruments Pty Ltd

The NWS liquid level switch is designed as a 2- and 3-wire switch and can be universally used in vessels and pipelines. The NWS operates on the tuning fork principle in air at resonance frequency. A piezoelectric crystal is used for excitation of oscillations and for monitoring the actual oscillation frequency.


Pressure switch/transmitter

01 October, 2008 | Supplied by: AMS Instrumentation & Calibration Pty Ltd

The Noshok 800 Series indicating pressure switch/pressure transmitter provides continuous pressure monitoring and allows programming of the setpoints without pressurising.


Single-board reconfigurable I/O platform

17 September, 2008 | Supplied by: National Instruments Aust Pty Ltd

National Instruments has released Single-Board RIO devices that offer engineers and scientists a low-cost, integrated hardware option for deploying embedded control and data acquisition applications for OEMs and machine builders.


High-speed data acquisition module

17 September, 2008 | Supplied by: Interworld Electronics and Computer Industries

Interworld Electronics  has available the 104-AIO16A multifunction analog I/O board. Its features include 10 analog input ranges, a 1024 sample FIFO buffer, onboard over sampling for additional noise reduction and auto calibration to reduce converter offset and gain errors.


  • All content Copyright © 2026 Westwick-Farrow Pty Ltd