Flow sensor for solids
05 October, 2008 | Supplied by: SWR Engineering Messtechnik Pty Ltd
FlowJam is a non-contact flow/no flow sensor for solids. It uses microwave technology to give reliable results under harsh conditions of dust and sunlight. It is a suitable device for detecting solid flows in hoppers, conveyors, screw conveyors, air slides, etc.
Pressure switch
05 October, 2008 | Supplied by: IMI Precision Engineering
The 50D is an IP65-rated electronic pressure switch suitable for use in pressure ranges -1 to 0 bar, -1 to 1 bar, 0 to 6 bar and 0 to 10 bar. It has two electric outputs with four output options: 2xPNP, 2xNPN, PNP+analog and NPN+analog.
Hygienic flowmeters
05 October, 2008 | Supplied by: ABB Australia Pty Ltd
The HygienicMaster range of flowmeters is targeted primarily at the food and beverage, pharmaceutical and biotechnology industries. The range provides accurate measurement in hygienic applications ranging from water through to fluids with extreme viscosities, high solid concentrations or low conductivity.
Schmidt flow sensor
05 October, 2008 | Supplied by: Pacific Rim Technical Services
The Schmidt flow sensor SS 20.260 offers a measuring range of 0-50 m/s and an operating temperature range of up to 120°C. The temperature can be measured with an additional linear output, and a separate temperature sensor is not required. The unit has a robust construction to protect it against impact.
Flow meter
05 October, 2008 | Supplied by: ABB Australia Pty Ltd
Part of ABB’s FlowMaster family, ProcessMaster incorporates features providing users enhanced performance with reduced complexity. Available in sizes 3 to 2000 mm, the ProcessMaster range offers a wide choice of liner and electrode options, enabling it to meet the needs of demanding applications.
Magnetic inductive flowmeter
05 October, 2008 | Supplied by: Kobold Instruments Pty Ltd
The DMI series flowmeter operates on the magneto-inductive principle. With no protrusions into the pipe, conductive liquids and slurries can be measured with virtually no system pressure loss. The DMI is available with a PEEK or PVDF flow tube and Hastelloy C measuring electrodes are standard.
Wireless temperature and humidity system
05 October, 2008 | Supplied by: Testo Pty Ltd
The Saveris radio probes measure temperature and humidity. The probes save their measurement data and send it to the central base at regular intervals. If a limit value is exceeded, a radio link is established immediately.
Gas chromatograph
05 October, 2008 | Supplied by: Siemens Ltd
The Sitrans CV process gas chromatograph based on micro-technology rapidly and precisely determines the calorific value of natural gas. The main use of Sitrans CV is for custody transfer of natural gas.
Vibrating fork level switch
01 October, 2008 | Supplied by: Kobold Instruments Pty Ltd
The NWS liquid level switch is designed as a 2- and 3-wire switch and can be universally used in vessels and pipelines. The NWS operates on the tuning fork principle in air at resonance frequency. A piezoelectric crystal is used for excitation of oscillations and for monitoring the actual oscillation frequency.
Pressure switch/transmitter
01 October, 2008 | Supplied by: AMS Instrumentation & Calibration Pty Ltd
The Noshok 800 Series indicating pressure switch/pressure transmitter provides continuous pressure monitoring and allows programming of the setpoints without pressurising.
High-speed data acquisition module
17 September, 2008 | Supplied by: Interworld Electronics and Computer Industries
Interworld Electronics has available the 104-AIO16A multifunction analog I/O board. Its features include 10 analog input ranges, a 1024 sample FIFO buffer, onboard over sampling for additional noise reduction and auto calibration to reduce converter offset and gain errors.
Single-board reconfigurable I/O platform
17 September, 2008 | Supplied by: National Instruments Aust Pty Ltd
National Instruments has released Single-Board RIO devices that offer engineers and scientists a low-cost, integrated hardware option for deploying embedded control and data acquisition applications for OEMs and machine builders.
Measuring boiler and furnace temperatures — replacing welded thermocouples without shutting down
15 September, 2008 by Paul Aloia* | Supplied by: Moore Industries
Protection tubes and flexible sensors make it possible to replace thermocouples without shutting down the entire process for days or weeks.
Who adds value?
12 September, 2008 by John Immelman | Supplied by: Endress+Hauser Australia Pty Ltd
Building a greenfield process plant today inevitably throws up a host of challenges, but successful greenfield projects take advantage of a potent ingredient in the engineering chain: added value.
ABB pressure transmitters
05 September, 2008 | Supplied by: ABB Australia Pty Ltd
ABB has enhanced its 364 series of differential and gauge pressure transmitters with the addition of all welded direct and remote-mounted diaphragm seals. The 364 series is designed to suit a wide range of industries, including those with aggressive or hazardous environments where performance needs to be optimised, such as those in chemicals or offshore oil and gas production.
