Bulk solid flow measurement
01 November, 2008 | Supplied by: SWR Engineering Messtechnik Pty Ltd
SolidFlow can be used to measure lean phase mass flow of bulk solids up to 20 t/h, either in free fall or pneumatically conveyed. It uses a microwave technique.
Load pins
01 November, 2008 | Supplied by: Bestech Australia Pty Ltd
The 5719/5799 model double-ended shear-beam load pins from BCM Sensor Technologies are made from either alloy steel (5719) or stainless steel (5799) and sealed to IP66 or IP67 protection grade, depending on application conditions.
Printing liquid totaliser
01 November, 2008 | Supplied by: Innovec Controls Pty Ltd
The ITP is an intelligent printing totaliser intended primarily for liquid flow measurement.
Melt pressure transducers
01 November, 2008 | Supplied by: Bestech Australia Pty Ltd
The MPT160, MPT161 and MPT26X series are a range of melt pressure and temperature transducers that are constructed with a full bridge strain gauge circuit and are made wholly from stainless steel material. Additionally, the pressure diaphragm features a surface treatment with special alloy coating for all models.
Level measuring instrument
01 November, 2008 | Supplied by: Endress+Hauser Australia Pty Ltd
The Liquicap T continuous level measuring instrumentation for liquids features a build-up compensation mode that overcomes performance problems normally associated with conventional capacitance/inductance level measuring probes, particularly in chemically aggressive, sticky liquid applications.
Laser infrared thermometer
01 November, 2008 | Supplied by: Bestech Australia Pty Ltd
The optris CT laser infrared thermometer facilitates non-contact temperature measurement with precise aiming from -40 to 975 °C. It can measure low and high temperatures of the smallest spots, from 0.9 mm.
Oxygen sensor
01 November, 2008 | Supplied by: ABB Australia Pty Ltd
ABB has announced that it has rounded off its product range of measuring technologies for the EasyLine series of continuous gas analysers with the addition of the zirconium dioxide sensor ZO23.
Pressure switches
01 November, 2008 | Supplied by: SMC Australia | New Zealand
The ISE80 (pressure) and ZSE80 (vacuum) ranges of pressure switches are compatible with fluids including air and water. Stainless steel wetted parts make this switch suitable to many pressure monitoring applications.
Thermocouple/millivolt module
01 November, 2008 | Supplied by: GE Intelligent Platforms Asia Pacific Pte Ltd
The VersaMax Micro thermocouple (Type K, J, E, S, T, B or N)/millivolt (±50 or 100 mV) expansion module can be used in a wide range of temperature monitoring and controlling, as well as weighing applications.
Pressure calibrators
01 November, 2008 | Supplied by: Fluke Australia Pty Ltd
The Fluke 719 electric pressure calibrators are high-performance, lightweight devices featuring a built-in electric pressure pump that makes it possible to quickly calibrate and test pressure devices with one hand.
One-stop DP flowmeter solution
01 November, 2008 | Supplied by: Endress+Hauser Australia Pty Ltd
Although differential pressure (DP) flowmeters are based on a relatively inexpensive and mature technology, selecting and installing these devices is not simple and requires a reasonable level of engineering skill.
Sonar transducer for level control
01 November, 2008 | Supplied by: Hawk Measurement Systems Pty Ltd
The line of ‘fourth-generation’ sonar transducers designed for improved sensing of interface levels in clarifiers and thickeners is available. The sensors claim improvements in overall power, penetration and calibration density range. They provide better capability under high suspended solids loading, ‘sliming’ and generally upset process conditions.
Air and gas flowmeters
05 October, 2008
The PFM range of flowmeters is for use with air and a variety of gases. With flow measurement of air, liquids, even harsh acids and alkalis, the SMC range of flow measurement equipment can provide in situ displays, remote indicators, analog transmission and digital switching. Some models are equipped with flow adjustment to permit the required flowrate to be preset.
Pressure switch
05 October, 2008 | Supplied by: IMI Precision Engineering
The 50D is an IP65-rated electronic pressure switch suitable for use in pressure ranges -1 to 0 bar, -1 to 1 bar, 0 to 6 bar and 0 to 10 bar. It has two electric outputs with four output options: 2xPNP, 2xNPN, PNP+analog and NPN+analog.
Wireless temperature and humidity system
05 October, 2008 | Supplied by: Testo Pty Ltd
The Saveris radio probes measure temperature and humidity. The probes save their measurement data and send it to the central base at regular intervals. If a limit value is exceeded, a radio link is established immediately.
