Level detection switches reduce hazardous spills
25 July, 2008
It is critical that plant managers and engineers choose the right level detection switches as they can prevent the accidental discharge of toxic products into the environment. A well-selected, correctly installed level switch will save companies the expense associated with treating and disposing of spilt material. Moreover, it will safeguard companies against punitive fines in the event of an unavoidable accident.
Level detection switches reduce hazardous spills
25 July, 2008 | Supplied by: Endress+Hauser Australia Pty Ltd
It is critical that plant managers and engineers choose the right level detection switches as they can prevent the accidental discharge of toxic products into the environment. A well-selected, correctly installed level switch will save companies the expense associated with treating and disposing of spilt material. Moreover, it will safeguard companies against punitive fines in the event of an unavoidable accident.
Optimising the efficiency of dust control equipment — near incident forward scatter particulate monitoring instruments
25 July, 2008 by William Averdieck, PCME Ltd | Supplied by: Phoenix Instrumentation Pty Ltd
Environmental regulations and responsibilities are stimulating industrial process operators to minimise particulate emissions from fabric filter and electrostatic precipitator dust arrestment plant by optimised maintenance and operation programs. The online monitoring of particulate emissions plays a fundamental role in this optimisation, providing the evidence and feedback of any improvements.
Low differential pressure transmitter
17 July, 2008 | Supplied by: Dwyer Omega (Aust) Pty Ltd
The Series 610 low differential pressure transmitter is capable of measuring the pressure and flow of air or non-conducting gases at greater resolution in clean rooms, isolation rooms and other critical environments.
Flowmeters for water treatment
08 July, 2008 | Supplied by: H2O Rx
The materials used in the construction of Titan flowmeters are of the highest standard and include AISI316 stainless steel, engineering plastics and sapphire. Extensive use is made of plastic materials such as PEEK and PVDF, also chosen for their inherently good chemical resistance.
Orbisint CPS11D and Orbipore CPS91D pH electrodes
08 July, 2008 | Supplied by: Endress+Hauser Australia Pty Ltd
The Orbisint CPS11D and the Orbipore CPS91D pH electrodes combine the advantage of having a contaminant-resistant reference, with fast response time and high reproducibility.
Turbine wheel flowmeter
08 July, 2008 | Supplied by: Kobold Instruments Pty Ltd
The turbine wheel flowmeter type DPE operates according to the well-known blade wheel principle. Numerous liquid media of low viscosity, ranging from distilled water to fuels, alcohol and various chemicals can be monitored with this robust measuring instrument.
SEN pressure sensors
08 July, 2008 | Supplied by: Kobold Instruments Pty Ltd
The SEN pressure sensors are compact and can be used in a variety of applications. The measuring principle uses a thick film ceramic measuring cell, has very good repeatability and is very reliable. Automatic temperature compensation is provided to give great accuracy.
Self-validating point level sensor
08 July, 2008 | Supplied by: Metaval Engineering Sales
The SafePoint from Monitor Technologies LLC is a self-validating point level sensor for monitoring the presence and absence of powders, granular materials and other bulk solids. It is completely fail-safe and can be used in bins, silos and other vessels with process temperature conditions up to 399°C to shut off bin filling and protect against overfilling due to unknown sensor failures.
Hazardous area pressure sensor
08 July, 2008 | Supplied by: Turck Australia Pty Ltd
Turck has expanded its line of pressure sensors to include a specialty sensor for hazardous areas. The PT4300 is a media isolated stainless steel pressure sensor for use in oil and gas, refrigeration, gas compression, test stands and industrial OEM applications.
Series UXF2 ultrasonic flow transmitter
08 July, 2008 | Supplied by: Dwyer Omega (Aust) Pty Ltd
The series UXF2 ultrasonic flow transmitter is an economical alternative to magnetic, vortex and differential pressure transmitters. This transit time flowmeter combines advanced microprocessing detection methods with a versatile design to provide accurate and obstructionless flow measurement of any clean water application.
Explosion-proof temperature transmitter
08 July, 2008 | Supplied by: Dwyer Omega (Aust) Pty Ltd
The series TTE is a suitable product for hazardous temperature measurement applications. This transmitter has seven preprogrammed temperature ranges that are selectable via an internal dipswitch. For those applications that need a custom range, the transmitter can easily be field configured for any range between -29 to 121°C with a minimum span of 4.4°C.
DVZ Series vortex flowmeters
08 July, 2008 | Supplied by: Kobold Instruments Pty Ltd
The DVZ Series flowmeters are compact and inexpensive and can be utilised in all applications for low-viscosity fluids. Since the units operate without any mechanical moving parts, they are practically maintenance free and have distinct advantages compared with units based on the float or rotor principle.
Red Lion CUB5 Series analog panel meters
08 July, 2008 | Supplied by: Control Logic Pty Ltd
Red Lion has announced its CUB5 Series analog panel meters that have a footprint that is 30% smaller than conventional 48 x 96 mm meters.
Multi-gas monitoring system
08 July, 2008 | Supplied by: Thermo Fisher Scientific
Thermo Fisher Scientific has announced the Model 70 FTIR Multi-Gas CEMS, a single analyser, continuous monitoring system capable of measuring up to 10 gases or more for almost any incineration or co-incineration application. The real-time integrated stack gas monitoring system possesses a high level of sensitivity, specificity and dynamic range, with a dynamically aligned interferometer that provides long- and short-term stability.
