Level detection switches reduce hazardous spills
25 July, 2008 | Supplied by: Endress+Hauser Australia Pty Ltd
It is critical that plant managers and engineers choose the right level detection switches as they can prevent the accidental discharge of toxic products into the environment. A well-selected, correctly installed level switch will save companies the expense associated with treating and disposing of spilt material. Moreover, it will safeguard companies against punitive fines in the event of an unavoidable accident.
Level detection switches reduce hazardous spills
25 July, 2008
It is critical that plant managers and engineers choose the right level detection switches as they can prevent the accidental discharge of toxic products into the environment. A well-selected, correctly installed level switch will save companies the expense associated with treating and disposing of spilt material. Moreover, it will safeguard companies against punitive fines in the event of an unavoidable accident.
Optimising the efficiency of dust control equipment — near incident forward scatter particulate monitoring instruments
25 July, 2008 by William Averdieck, PCME Ltd | Supplied by: Phoenix Instrumentation Pty Ltd
Environmental regulations and responsibilities are stimulating industrial process operators to minimise particulate emissions from fabric filter and electrostatic precipitator dust arrestment plant by optimised maintenance and operation programs. The online monitoring of particulate emissions plays a fundamental role in this optimisation, providing the evidence and feedback of any improvements.
Low differential pressure transmitter
17 July, 2008 | Supplied by: Dwyer Omega (Aust) Pty Ltd
The Series 610 low differential pressure transmitter is capable of measuring the pressure and flow of air or non-conducting gases at greater resolution in clean rooms, isolation rooms and other critical environments.
Red Lion CUB5 Series analog panel meters
08 July, 2008 | Supplied by: Control Logic Pty Ltd
Red Lion has announced its CUB5 Series analog panel meters that have a footprint that is 30% smaller than conventional 48 x 96 mm meters.
Coupling pads for ultrasonic flowmeters
08 July, 2008 | Supplied by: AMS Instrumentation & Calibration Pty Ltd
Flexim’s small black pads add to the long-term durability of clamp-on ultrasonic flowmeters.
2-wire level switch
08 July, 2008 | Supplied by: AMS Instrumentation & Calibration Pty Ltd
The NuTec LS2000 level switch from Fluid Components International is designed for 2-wire, 4-20 mA loop power that allows the LS2000 to serve as a drop-in replacement for other 2-wire mechanical float and paddle switches without any wiring modifications during plant retrofit projects, which simplifies installation and reduces cost. The LS2000 is also available for 115/230 VAC or 24 VDC input power and a 6 A relay output.
SEN pressure sensors
08 July, 2008 | Supplied by: Kobold Instruments Pty Ltd
The SEN pressure sensors are compact and can be used in a variety of applications. The measuring principle uses a thick film ceramic measuring cell, has very good repeatability and is very reliable. Automatic temperature compensation is provided to give great accuracy.
Multi-gas monitoring system
08 July, 2008 | Supplied by: Thermo Fisher Scientific
Thermo Fisher Scientific has announced the Model 70 FTIR Multi-Gas CEMS, a single analyser, continuous monitoring system capable of measuring up to 10 gases or more for almost any incineration or co-incineration application. The real-time integrated stack gas monitoring system possesses a high level of sensitivity, specificity and dynamic range, with a dynamically aligned interferometer that provides long- and short-term stability.
DVZ Series vortex flowmeters
08 July, 2008 | Supplied by: Kobold Instruments Pty Ltd
The DVZ Series flowmeters are compact and inexpensive and can be utilised in all applications for low-viscosity fluids. Since the units operate without any mechanical moving parts, they are practically maintenance free and have distinct advantages compared with units based on the float or rotor principle.
Orbisint CPS11D and Orbipore CPS91D pH electrodes
08 July, 2008 | Supplied by: Endress+Hauser Australia Pty Ltd
The Orbisint CPS11D and the Orbipore CPS91D pH electrodes combine the advantage of having a contaminant-resistant reference, with fast response time and high reproducibility.
Flowmeters for water treatment
08 July, 2008 | Supplied by: H2O Rx
The materials used in the construction of Titan flowmeters are of the highest standard and include AISI316 stainless steel, engineering plastics and sapphire. Extensive use is made of plastic materials such as PEEK and PVDF, also chosen for their inherently good chemical resistance.
Crystal Engineering XP2i-DP differential digital test gauge
08 July, 2008 | Supplied by: Floyd Instruments Pty Ltd
Crystal Engineering has introduced the XP2i-DP differential digital test gauge which is also capable of data logging. The unit is rugged, intrinsically safe, ATEX certified and has an accuracy of ±0.1% of reading between 20-100% and ±0.02% of full scale between 0-20%.
Turbine wheel flowmeter
08 July, 2008 | Supplied by: Kobold Instruments Pty Ltd
The turbine wheel flowmeter type DPE operates according to the well-known blade wheel principle. Numerous liquid media of low viscosity, ranging from distilled water to fuels, alcohol and various chemicals can be monitored with this robust measuring instrument.
Acrylic flowmeter
08 July, 2008 | Supplied by: Kobold Instruments Pty Ltd
The KFR acrylic flowmeter offers a balance between low-cost, accuracy and range availability. Bridging the micro-flow and large flow ranges, this meter can provide an effective solution to many industrial applications.
