Furness Controls differential pressure transmitter

Saturday, 01 November, 2008 | Supplied by: Technical & Scientific Equipment


The Furness Controls FCO352 is a fully configurable, industrial differential pressure transmitter available in measurement ranges from ±5 Pa to ±20 kPa full scale. The core transducer is based on the Furness Controls flat diaphragm design which allows the accuracy to be maintained down towards zero — reliably performing to ±0.25% of reading.

This compact and robust unit, which is rated to IP66, has been designed to meet the requirements of high-sensitivity and low-range pressure measurements. Typical applications include: combustion pressure measurement and control of industrial furnaces; air pressure measurement and control of dryers, kilns and ovens; and airflow measurement in conjunction with Pitot static tubes, orifice plates or venturi.

When used for airflow measurement, this unit is claimed to allow a much higher turndown ratio than is possible with conventional transducers.

Programmable range changing, engineering units and display options are features of this microprocessor-based differential pressure transmitter. Selection of all functions is via a 4-button keypad or a PC. The alphanumeric 4½-digit LCD clearly displays the signal reading and selected units.

 

Online: www.techsci.com.au
Phone: 03 9584 1133
Related Products

Siemens Sitrans FMT020 transmitter

The Sitrans FMT020 is backwards compatible with existing sensors and offers extended conductivity...

Krohne OPTIBAR FC 1000 flow computer

The OPTIBAR FC 1000 is a compact flow computer for volumetric flow calculation and heat quantity...

Endress+Hauser QWX43 multisensor fermentation monitor

The Fermentation Monitor QWX43 is designed to enable a seamless and simple monitoring of...


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd