An irrefutable measurement solution for bunker fuel oil
19 May, 2009 | Supplied by: Invensys Process Systems (Australia) Pty Ltd
The metering of bunker fuel oil represents a series of difficult technical challenges, but BP Marine Fuels believed that by employing advanced technology, the arcane practice of manually measuring or ‘dipping’ the amount of bunker fuel oil on a fuel barge will be consigned to the past. Shipowners can now reconcile the volume of bunker fuel oil delivered without the requirement for inspection.
Food temperature measuring system
18 May, 2009 | Supplied by: OneTemp Pty Ltd
The Datapaq Food Tracker profiling system is a multi-channel method of measuring the actual product and ambient temperature throughout cook, fry and chill processes.
Failsafe level alarm relay and probe
11 May, 2009 | Supplied by: Multitrode Pty Ltd
MultiTrode has released the SafeSmart level alarm relay and failsafe probe that provides an additional failsafe detection.
Bimetal temperature transmitter
11 May, 2009 | Supplied by: Dwyer Omega (Aust) Pty Ltd
The Series BTO bimetal thermometer with transmitter output is designed to take remote readings along with measurements via a bimetal helix.
Dwyer data logger
11 May, 2009 | Supplied by: Dwyer Omega (Aust) Pty Ltd
Dwyer Instruments has released the Series DLI LCD data logger, which gives instant remote readings of temperature, humidity or atmospheric pressure.
Reagent-free inline ammonium analyser
11 May, 2009 | Supplied by: Endress+Hauser Australia Pty Ltd
The ISEmax CAS40 provides in situ measurement of ammonium and nitrate. This robust inline probe can significantly reduce the energy costs associated with aeration systems in nitrification and denitrification processes in wastewater treatment.
Wireless and ethernet data acquisition modules
20 April, 2009 | Supplied by: http://www.ni.com/dataacquisition/wifi/
National Instruments has announced six wireless and ethernet data acquisition modules and two ingress protection (IP) enclosures for remote monitoring and control in harsh environments.
Analogue data acquisition modules
20 April, 2009 | Supplied by: http://www.ieci.com.au/products/nav.asp?Class=4&BaseCat1=32
Interworld Electronics supplies a range of multi-function analogue I/O and analogue output boards and modules. Analogue data acquisition is available for almost any computer that supports PCI, PC/104, PC/104 Plus or USB bus connections.
Radiometric measurement — at home in extreme process conditions
06 April, 2009 by Simon Rigling* | Supplied by: Endress+Hauser Australia Pty Ltd
Radiometric measurement, also known as nuclear- or gamma-based measurement, is an extremely reliable and safe, non-invasive solution that is suitable for level limit detection, continuous level measurement, and density and interface layer measurement.
Temperature switch with rotating set-up dials
01 April, 2009 | Supplied by: ifm efector pty ltd
The compact TK series switch and its 316 stainless steel RTD probe measure only 72 mm and the probe is directly mounted into a pipe. Two mechanical set-up dials rotate to quickly establish the setpoint and resetpoint temperatures. The switch’s high accuracy ensures that the setpoint does not drift and calibration is not required.
Burkert Fluid Control Systems sanitary mag flowmeter
01 April, 2009 | Supplied by: Burkert Fluid Control Systems
Dedicated to process applications that do not require local push-button programming or display, the blind Type 8056 sanitary mag flowmeter delivers high accuracy over a wide flow velocity range. The Type 8056 is engineered for fast filling applications with short reaction time, high-speed sampling (short sampling/measurement time) and high-speed frequency output, making it suitable for filling systems.
Compact orifice DP flowmeters
01 April, 2009 | Supplied by: ABB Australia Pty Ltd
The OriMaster compact orifice DP flowmeter is a one-piece flowmeter that comes fully factory configured and pressure tested, solving many of the problems associated with sizing, selection, installation and operation of conventional orifice plate installations.
Inline water quality monitoring in distribution pipelines
01 April, 2009 | Supplied by: Westwater Enterprises
The Intellisonde multi-parameter monitoring system is a measuring device designed for direct insertion into potable water pipeline distribution networks, providing benefits including: continuous water quality monitoring within the distribution system; integration into a water utility data collection system such as SCADA; providing real-time and historical data — both alphanumeric and graphical; assistance with compliance and regulatory requirements; analysis of the distribution network; and minimising risk of contamination posed by bursts and repairs.
Oil-in-water measurement
01 April, 2009 | Supplied by: Environmental & Process Technologies
Enviro-Flu-HC is a new generation of highly sensitive submersible sensors for oil-in-water measurement. The UV fluorescence principle used for detection is claimed to be more sensitive than other existing detection principles, such as infrared scattering.
Panel mount rate and total display
01 April, 2009 | Supplied by: Amalgamated Instrument Co
The PM6-TR is a ratemeter/totaliser and supersedes both the PM6-FX and PM6-FC models. This single 1/8 DIN panel meter offers the ability to monitor and indicate rate and count (or total) from a wide variety of pulse output sensors. The display can be toggled between rate and total using a remote input.
