Bulk solid flow measurement
01 November, 2008 | Supplied by: SWR Engineering Messtechnik Pty Ltd
SolidFlow can be used to measure lean phase mass flow of bulk solids up to 20 t/h, either in free fall or pneumatically conveyed. It uses a microwave technique.
Pressure calibrators
01 November, 2008 | Supplied by: Fluke Australia Pty Ltd
The Fluke 719 electric pressure calibrators are high-performance, lightweight devices featuring a built-in electric pressure pump that makes it possible to quickly calibrate and test pressure devices with one hand.
One-stop DP flowmeter solution
01 November, 2008 | Supplied by: Endress+Hauser Australia Pty Ltd
Although differential pressure (DP) flowmeters are based on a relatively inexpensive and mature technology, selecting and installing these devices is not simple and requires a reasonable level of engineering skill.
Level measuring instrument
01 November, 2008 | Supplied by: Endress+Hauser Australia Pty Ltd
The Liquicap T continuous level measuring instrumentation for liquids features a build-up compensation mode that overcomes performance problems normally associated with conventional capacitance/inductance level measuring probes, particularly in chemically aggressive, sticky liquid applications.
Furness Controls differential pressure transmitter
01 November, 2008 | Supplied by: Technical & Scientific Equipment
The Furness Controls FCO352 is a fully configurable, industrial differential pressure transmitter available in measurement ranges from ±5 Pa to ±20 kPa full scale. The core transducer is based on the Furness Controls flat diaphragm design which allows the accuracy to be maintained down towards zero — reliably performing to ±0.25% of reading.
Sonar transducer for level control
01 November, 2008 | Supplied by: Hawk Measurement Systems Pty Ltd
The line of ‘fourth-generation’ sonar transducers designed for improved sensing of interface levels in clarifiers and thickeners is available. The sensors claim improvements in overall power, penetration and calibration density range. They provide better capability under high suspended solids loading, ‘sliming’ and generally upset process conditions.
Printing liquid totaliser
01 November, 2008 | Supplied by: Innovec Controls Pty Ltd
The ITP is an intelligent printing totaliser intended primarily for liquid flow measurement.
Pressure switches
01 November, 2008 | Supplied by: SMC Australia | New Zealand
The ISE80 (pressure) and ZSE80 (vacuum) ranges of pressure switches are compatible with fluids including air and water. Stainless steel wetted parts make this switch suitable to many pressure monitoring applications.
Load pins
01 November, 2008 | Supplied by: Bestech Australia Pty Ltd
The 5719/5799 model double-ended shear-beam load pins from BCM Sensor Technologies are made from either alloy steel (5719) or stainless steel (5799) and sealed to IP66 or IP67 protection grade, depending on application conditions.
Melt pressure transducers
01 November, 2008 | Supplied by: Bestech Australia Pty Ltd
The MPT160, MPT161 and MPT26X series are a range of melt pressure and temperature transducers that are constructed with a full bridge strain gauge circuit and are made wholly from stainless steel material. Additionally, the pressure diaphragm features a surface treatment with special alloy coating for all models.
Laser infrared thermometer
01 November, 2008 | Supplied by: Bestech Australia Pty Ltd
The optris CT laser infrared thermometer facilitates non-contact temperature measurement with precise aiming from -40 to 975 °C. It can measure low and high temperatures of the smallest spots, from 0.9 mm.
Oxygen sensor
01 November, 2008 | Supplied by: ABB Australia Pty Ltd
ABB has announced that it has rounded off its product range of measuring technologies for the EasyLine series of continuous gas analysers with the addition of the zirconium dioxide sensor ZO23.
Thermocouple/millivolt module
01 November, 2008 | Supplied by: GE Intelligent Platforms Asia Pacific Pte Ltd
The VersaMax Micro thermocouple (Type K, J, E, S, T, B or N)/millivolt (±50 or 100 mV) expansion module can be used in a wide range of temperature monitoring and controlling, as well as weighing applications.
Keller AG digital manometer
01 November, 2008 | Supplied by: Technical & Scientific Equipment
Keller AG has introduced the high-accuracy LEO 2 digital manometer, designed to handle demanding monitoring tasks in the plant and machinery manufacturing sector.
Pressure sensor
01 November, 2008 | Supplied by: SMC Australia | New Zealand
The Series PSE 560 sensor is a copper-free, corrosion-resistant fluid pressure sensor. Designed to withstand the often harsh environments encountered in industry, this stainless steel fluid pressure sensor has an IP65 enclosure and conforms to both CE and UL/CSA standards.
