Instrumentation

Endress+Hauser Waterpilot FMX21 submersible pressure sensor

17 June, 2010 | Supplied by: Endress+Hauser Australia Pty Ltd

The Waterpilot FMX21 is a high-precision, robust submersible pressure sensor for hydrostatic level measurement, in fresh water, wastewater and salt water.


Burkert LFC (liquid flow controller)

17 June, 2010 | Supplied by: Burkert Fluid Control Systems

The LFC (liquid flow controller) is fully compatible with Bürkert’s range of mass flow controllers (MFC). It complements the company’s range of compact fluid control devices for the measurement and dosage of liquids with a nominal flow rate of 10-600 mL/min and a span of 1:10. The LFC is based on the proven and tested software, hardware and mechanics of the MFC series. Due to its compact design, the controller can be installed in difficult locations, such as directly behind angled piping.


Endress+Hauser Prosonic T FMU30 ultrasonic level sensor

17 June, 2010 | Supplied by: Endress+Hauser Australia Pty Ltd

The Prosonic T FMU30 is an economical ultrasonic level sensor and transmitter with many of the high-end features found in more expensive devices.


What you really need to know about sample rate

07 June, 2010 by Roger W Lockhart, DATAQ Instruments | Supplied by: Adept Total Turnkey Solutions

By and large, discussions of sample rate are like watching paint dry. Do we really have to get into the details? After all, everyone knows that you only need to sample at twice the frequency of your signal of interest to get good results, right? If you answered “right!” to that last statement, perhaps you should read on.


Ametek Drexelbrook Impulse Series TDR level transmitter

25 May, 2010 | Supplied by: Measurement Solutions Pty Ltd

Ametek Drexelbrook has released the Impulse Series continuous TDR level transmitter. This guided wave radar level transmitter is designed to provide accurate total level, distance or volumetric outputs. TDR technology has been widely used in level measurement for its inherent ability to remain unaffected by variations in process materials’ electrical characteristics.


Furness Controls FCO96 series laminar flow elements

25 May, 2010 | Supplied by: Bestech Australia Pty Ltd

The FCO96 series of laminar flow elements from Furness Controls is a range of primary flow devices for the measurement of low volume air and gas flows from 0.1 mL/min to 10,000 L/min.


Gems Sensors & Controls CAP-100/-200 Series capacitive level sensors

17 May, 2010 | Supplied by: Control Components Pty Ltd

The CAP-100 and CAP-200 Series capacitive liquid level sensors, from Gems Sensors & Controls, are designed to offer a level sensing solution for a wide variety of bottle types including plastic, glass and fibreglass. These compact sensors are suitable for medical applications such as waste, reagent or diluent liquids as well as dark, sticky or viscous fluids. Easy to calibrate, both sensor series are available in both aqueous and non-aqueous versions and can be delivered with factory preset sensitivity for quick installation for OEM orders. They may also be used as a proximity sensor to detect the presence of solids such as paper or pulp.


Machines get health checks online

17 May, 2010 | Supplied by: Rockwell Automation Australia

Condition monitoring is a proven, valuable tool for optimising maintenance strategies. Ian Liebler, Rockwell Automation integrated conditioning monitoring solutions architect, explains how integrated condition monitoring can provide even greater production and maintenance efficiencies through streamlining real-time information flow.


Anton Paar L-Dens 323 density transmitter

12 May, 2010 | Supplied by: B-R Controls Pty Ltd

The Anton Paar L-Dens 323 density transmitter is available with wetted parts made of Hastelloy. It is suitable for the continuous monitoring of the density, or concentration, of liquids when an accuracy of 1x10-3 g/cm3 is required for the density results.


Dwyer Series PFT paddlewheel flow sensor

12 May, 2010 | Supplied by: Dwyer Omega (Aust) Pty Ltd

The Series PFT is a paddlewheel flow sensor used to monitor liquid flow rates in pipes from 38 mm to 1 m with one size-adjustable sensor.


Applying Coriolis technology to high-pressure applications

06 May, 2010 by John Daly* | Supplied by: AMS Instrumentation & Calibration Pty Ltd

Measurement at high pressure needs heavy-duty metering.


ABB Endura AZ20 combustion gas analyser

28 April, 2010 | Supplied by: ABB Australia Pty Ltd

Manufactured using a ceramic-to-steel bonding process, the Endura AZ20 combustion gas analyser offers improved resistance to thermal stresses and shocks compared to a conventional brazed design. This enables it to be used in a wider range of applications subject to sudden variations in process temperature, as well as offering a gas tight bond throughout its operating temperature range.


Parker CCIMS level-flange integrated DP manifold concept

28 April, 2010 | Supplied by: Parker (Aust) Pty Ltd

The CCIMS level-flange, a highly integrated manifold concept from Parker Hannifin, is designed to offer users a simpler means of installing level measurement instrumentation to process tanks and vessels.


Thermo Fisher UNIK 5000 pressure-sensing platform

28 April, 2010 | Supplied by: Thermo Fisher Scientific

The UNIK 5000 pressure-sensing platform combines silicon technology and analog circuitry with modular design. Typical applications are in the oil and gas, automotive, aerospace and power generation sectors, as well as in test equipment, pneumatics and hydraulics, and other process industries.


Aurora natural gas moisture analyser

28 April, 2010 | Supplied by: GE Pacific Pte Ltd - GE Sensing & IT

The Aurora analyser uses tuneable diode laser absorption spectroscopy (TDLAS) to quickly measure moisture in natural gas.


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd