Hart Scientific 5606 and 5607 full immersion PRTs
07 February, 2010 | Supplied by: Fluke Australia Pty Ltd
The Hart Scientific 5606 and 5607 full immersion PRTs are designed to perform in full immersion applications where both the transition junction and the lead wires must withstand temperatures covering the entire operating range of the probe. Such applications can include calibration or validation of sensors used in laboratory or bio freezers, walk-in refrigerators, autoclaves, ovens, stability test chambers, furnaces or incubators.
Ircon Modline 6 series of infrared thermometers
15 January, 2010 | Supplied by: AMS Instrumentation & Calibration Pty Ltd
Ircon has introduced the Modline 6 series of infrared thermometers. This line of sensors features advanced signal processing and background-reflected energy compensation capabilities and includes one- and two-colour fibre-optic IR devices designed for harsh operating environments.
Futek LSB600 S-beam load cell
15 January, 2010 | Supplied by: Metromatics Pty Ltd
The Futek LSB600 S-beam load cell is a high-capacity tension and compression transducer with a wide capacity, ranging from 44.5 to 111 kN. With the USB output option, engineers can eliminate the need for an analog amplifier, power supply and display equipment. The USB integration also includes the company’ USB software which allows users to monitor the output of the sensor in real time.
Noshok sintered pressure snubbers
15 January, 2010 | Supplied by: AMS Instrumentation & Calibration Pty Ltd
Noshok’s sintered pressure snubbers are intended to provide a simple and cost-effective solution to protect expensive instrumentation.
Ceramic sensors perform well in tough applications
21 December, 2009 by John Van Nostrand | Supplied by: Endress+Hauser Australia Pty Ltd
Precision and reliability are key concerns when selecting pressure transmitters. Using pressure measuring devices that utilise a ceramic measuring cell rather than an oil-filled pressure membrane is one way instrument engineers can increase accuracy, reliability and long-term stability.
Temperature measurement and calibration: what every instrument technician should know
11 December, 2009 | Supplied by: Fluke Australia Pty Ltd
Temperature may be the most commonly measured physical parameter. Yet there have never been so many ways to measure it as there are today.
POGC joins ABB's Solution Provider Programme
24 November, 2009 | Supplied by: HMA Group of Companies
POGC has joined the ABB Process Analytics Solution Provider Programme.
Dwyer Series WMT multi-jet water meter
23 November, 2009 | Supplied by: Dwyer Omega (Aust) Pty Ltd
The Series WMT multi-jet water meter with pulse output is suitable for commercial and industrial applications. The multi-jet design allows simplicity and accuracy with wide flow ranges, even in low flow applications.
Dwyer Series UXF3 ultrasonic flowmeter
23 November, 2009 | Supplied by: Dwyer Omega (Aust) Pty Ltd
The Series UXF3 ultrasonic flowmeter converters are paired with Series SX1 or SX2 sensors in order to utilise the transit-time measure method.
FGP Sensors XPCM10 miniature pressure transducer
23 November, 2009 | Supplied by: Bestech Australia Pty Ltd
The XPCM10 from FGP Sensors is a miniature pressure transducer designed for use in temperatures of up to 220°C. It incorporates FGP Sensors’ SanShift technology that is designed to virtually eliminate zero shifts caused by installation torque.
Micropilot M FMR250 antenna
13 November, 2009 | Supplied by: Endress+Hauser Australia Pty Ltd
Endress+Hauser has expanded its Micropilot M range with the launch of the FMR250 parabolic antenna.
PG electronic contact manometer
13 November, 2009 | Supplied by: ifm efector pty ltd
The electronic contact manometer PG combines the characteristics of a high-quality pressure transmitter with 0.2 % accuracy, a 4-20 mA analog output signal and a switching output with the good readability of an analog manometer display.
Crius 3200 dissolved oxygen monitor
13 November, 2009 | Supplied by: Bintech Systems Pty Ltd
The Crius 3200 dissolved oxygen monitor offers an automatic in-situ calibration check as an option, making it able to save customers money by checking its calibration at user-defined time intervals.
Applied Analytics TDL-506 oxygen monitoring system
13 November, 2009 | Supplied by: B-R Controls Pty Ltd
The Applied Analytics TDL-506 oxygen monitoring system uses surface-emitting laser technology to produce accurate, fast and stable oxygen measurements in even the most volatile process streams.
WIKA air2guide series of measuring instruments
13 November, 2009 | Supplied by: WIKA Australia
WIKA has introduced the air2guide series of measuring instruments for mandatory filter and fan monitoring in ventilation and air conditioning (VAC) including the air2guideP mechanical differential pressure gauge, the air2guideP+E mechanical differential pressure gauge with analog display and analog output signal, and the air2guideF volume flow gauge.
