Graphtec midi LOGGER GL220
18 October, 2010 | Supplied by: Lontek
The Graphtec midi logger GL220 has ten isolated channels with multifunction inputs. The isolated input system ensures that signals are not interfered with by sensors connected to other channels. It can be used to capture voltage, temperature, humidity and pulse as well as logic signals.
Siemens Sitrans FST020 clamp-on ultrasonic flowmeter
14 October, 2010 | Supplied by: Siemens Ltd
The Sitrans FST020 clamp-on ultrasonic flowmeter is designed specifically for basic applications that only require flow reading functionality along with easy communication capabilities. The device measures almost any liquid and meets the specific requirements of industries such as water and wastewater, HVAC, power and chemical. The flowmeter can be installed on pipes up to DN 9000 (9000 mm) in size and, because of the simplified configuration options and set-up, can be quickly commissioned.
Bestech thermoMETER CT M3 infrared temperature sensor
11 October, 2010 | Supplied by: Bestech Australia Pty Ltd
The thermoMETER CT M3 is an infrared temperature sensor that provides accurate temperature measurements for metals, secondary metal processing and ceramic materials. It has a temperature range of 50 to 600°C and the unit can be used in ambient temperatures of 85°C without cooling.
Datapaq Food Tracker profiling system
17 September, 2010 | Supplied by: OneTemp Pty Ltd
The Food Tracker profiling system from Datapaq is a multi-channel method of measuring the actual product and ambient temperature throughout any cook/fry/chill processes.
SEW-Eurodrive DUV30A vibration analysis sensor.
17 September, 2010 | Supplied by: SEW-Eurodrive Pty Ltd
SEW-Eurodrive has launched its updated vibration analysis sensor, the DUV30A. Replacing the company’s DUV10A sensor, the DUV30A features faster sampling time at a constant speed, allowing the monitoring of more dynamic gear-unit applications.
Dwyer Series AVFS adjustable air flow switch
17 September, 2010 | Supplied by: Dwyer Omega (Aust) Pty Ltd
The Series AVFS adjustable air flow switch is specifically designed to monitor air flow in ducts and provides a 3A contact output to indicate a change or loss of flow. The AVFS will signal a loss of flow and the normally open SPST output will indicate the detected decrease. For ease of installation and system troubleshooting, the switch possesses a red/green LED indication to provide local status if the air flow is above (green) or below (red) the set point.
Futek LTH350 load cell with USB interface
17 September, 2010 | Supplied by: Metromatics Pty Ltd
The LTH350 load cell from Futek Advanced Sensor Technology is now available with a USB output option. The load cell provides miniature solutions for applications where space is limited. This particular miniature donut load cell is suitable for press or inline compression applications.
Bronkhorst High-Tech Select series digital mass flow meters
17 September, 2010 | Supplied by: Anri Instruments & Controls Pty Ltd
Bronkhorst High-Tech’s Select series of digital mass flow meters and controllers for gases are designed to offer greater flexibility for user selection of both flow ranges and gas types. As a result of their ‘multi-fluid multi-range’ feature, in combination with a high rangeability (up to 187.5:1), equipment manufacturers (OEMs) are able to reduce the variety of spare instruments they keep in stock and thus reduce the cost of ownership. Users of MFCs in pilot plants or laboratories can rescale their instruments on site, saving time and money for dismounting and recalibration.
Series PFT paddlewheel flow sensor
17 September, 2010 | Supplied by: Dwyer Omega (Aust) Pty Ltd
The Series PFT paddlewheel flow sensor is designed for monitoring liquid flow in 3.8 to 100 cm pipes. The insertion design allows one model to be used for the full pipe size capability.
Continuous monitoring of particles after high-temperature filtration
14 September, 2010 by William Averdieck, PCME Ltd | Supplied by: Group Instrumentation Pty Ltd
Electrodynamic instruments have been used to continuously monitor particle concentrations after ceramic filters used in coal gasification, co-generation and high-temperature metals and chemical processes.
Hardy Instruments partners with Schneider Electric
07 September, 2010
Hardy Instruments has announced that it has entered into a strategic partnership with Schneider Electric as a member of its Collaborative Automation Partner Program (CAPP).
Endress+Hauser Liquistation CSF48 and Liquiport CSP44 samplers
06 September, 2010 | Supplied by: Endress+Hauser Australia Pty Ltd
The Liquistation CSF48 sampler and its portable version, the Liquiport CSP44, are designed for fully automated sampling of liquid media. They fulfil all international standards and legislation on water sampling while providing flexibility for different water applications including laboratory, sewage treatment and industrial processes.
Shepelec EnergE portable 60-channel data acquisition system
23 August, 2010 | Supplied by: Shepelec Instrumentation
The EnergE is a rugged, portable, 60-channel data acquisition system designed to be a portable recording and display system for analysis and fault-finding in all plant processes. The EnergE can be configured to accept any combination of input including Modbus, digital and analog. This allows recording of parameters such as power, compressed air, temperature, flow and level, as well as setpoints, process variables and current state of controlled objects.
Moore Industries BH explosion-proof field-mount instrument enclosures
23 August, 2010 | Supplied by: Moore Industries
CSA International has certified Moore Industries’ BH field-mount instrumentation enclosures as explosion-proof.
GE Panametrics AquaTrans AT868 liquid flow ultrasonic transmitter
23 August, 2010 | Supplied by: GE Pacific Pte Ltd - Sensing & Inspection
The AquaTrans AT868 liquid flow ultrasonic transmitter combines ultrasonic flow measurement capability with a low-cost transmitter package that can be installed right at the process measurement point.
