Instrumentation

Self-validating point level sensor

08 July, 2008 | Supplied by: Metaval Engineering Sales

The SafePoint from Monitor Technologies LLC is a self-validating point level sensor for monitoring the presence and absence of powders, granular materials and other bulk solids. It is completely fail-safe and can be used in bins, silos and other vessels with process temperature conditions up to 399°C to shut off bin filling and protect against overfilling due to unknown sensor failures.


pH sensors

01 July, 2008 | Supplied by: Endress+Hauser Australia Pty Ltd

The Orbisint CPS11D and the Orbipore CPS91D pH electrodes combine the advantage of having a contaminant-resistant reference, with fast response time and high reproducibility.


Self-validating point level sensor

01 July, 2008 | Supplied by: Metaval Engineering Sales

The SafePoint from Monitor Technologies LLC is a self-validating point level sensor for monitoring the presence and absence of powders, granular materials and other bulk solids.


Failsafe manual reset thermostats

01 July, 2008 | Supplied by: Practical Control Solutions

The KMF series of failsafe thermostats monitor temperatures in furnaces, ovens, kilns, boilers or any application where an overtemperature condition would result in a critical failure.


Digital differential pressure gauge

01 July, 2008 | Supplied by: Floyd Instruments Pty Ltd

Crystal Engineering has introduced the XP2i-DP differential digital test gauge which is also capable of data logging. The unit is rugged, intrinsically safe, ATEX certified and has an accuracy of ±0.1% of reading between 20-100% and ±0.02% of full scale between 0-20%.


Vibration level switch

01 July, 2008 | Supplied by: Hawk Measurement Systems Pty Ltd

The level sensing arrangement used in the Gladiator vibration smart switch is suitable for a wide range of liquids and solids, including slurries and pelletised materials.


CUB5 Series panel meter

01 July, 2008 | Supplied by: Control Logic Pty Ltd

Red Lion has announced its CUB5 Series analog panel meters that have a footprint that is 30% smaller than conventional 48 x 96 mm meters.


Hawk joins Brazil's MS Instrumentos

26 June, 2008

Hawk, a global provider of level, positioning and flow measurement technology, has announced a joint venture with MS Instrumentos in Brazil.


Active Ethernet I/O for temperature measurement

17 June, 2008 | Supplied by: http://www.crisptech.com.au

CrispTech has announced the Moxa ioLogik E2260 Active Ethernet I/O for temperature measurement.


Seeking self-adjusting instruments

12 June, 2008 by John Immelman* | Supplied by: Endress+Hauser Australia Pty Ltd

Modern process instruments incorporate a fair degree of intelligence used to optimise process variable accuracy and reliability, and can even undertake predictive maintenance. But they fail miserably in two critical aspects even when compared with technologies we use every day — self-adjustment and self-healing.


Digital pipeline leak detection — using fibre-optic distributed temperature sensing

19 May, 2008 by Richard Kluth and Jerry Worsley

With conventional pipeline leak detection methods there is a gap between what you believe is occurring along your pipeline and what is actually happening. This information gap can result in a delay in you discovering and locating leaks.


Analog panel meters with 30% smaller footprint

19 May, 2008 | Supplied by: http://www.control-logic.com.au

Red Lion has announced its CUB5 Series Analog Panel Meters that, according to the company, increase user versatility in a footprint that is 30% smaller than conventional 48 x 96 mm meters and nearly half the cost.


Single- and multi-turn encoders with Modbus/TCP Interface

19 May, 2008 | Supplied by: Plant Control & Automation

The absolute rotary encoder is able to provide three different kinds of output data: the position value, a velocity value and a time stamp. These can be use in arbitrary combinations for TCP transmitting.


Differential pressure piston-type gauge

17 April, 2008 | Supplied by: http://www.dwyer-inst.com.au

Dwyer Instruments has released the series PTGA differential pressure piston-type gauge. It can be used to measure the pressure drop across filters, strainers, pump performance testing and heat exchanger pressure drop monitoring.


Electromagnetic flowmeter detectors

19 March, 2008 | Supplied by: AMS Instrumentation & Calibration Pty Ltd

Yamatake Corporation has added to its WaterMAG series of medium- and large-sized electromagnetic flowmeter detectors specifically designed for the water industry markets.


  • All content Copyright © 2019 Westwick-Farrow Pty Ltd