Equipment

Beamex MC5 multifunction NATA calibrator

14 February, 2011 | Supplied by: TechRentals

Available to rent, the Beamex MC5 multifunction NATA calibrator provides calibration capability for pressure, temperature, electrical and frequency signals and can be used as a field-entry device (FED), allowing for the recording of non-calibration related maintenance results.


Lumberg Automation 8-pole M8 actuator/sensor connectors

17 January, 2011 | Supplied by: Belden Australia Pty Ltd

Lumberg Automation’s 8-pole M8 actuator/sensor connectors are being offered in two variants with moulded cables as well as in three field-attachable installation variants.


Lumberg Automation Profibus DP connectors

17 January, 2011 | Supplied by: Belden Australia Pty Ltd

Lumberg Automation Profibus DP connectors each have a D-sub and M12 interface, and are offered with 35, 90 or 180° cable outlets.


WIKA CEP6000 portable multifunction calibrator

10 January, 2011 | Supplied by: WIKA Australia

Despite its compact design and robust construction, the CEP6000 offers the functionality, accuracy and reliability of fixed installation laboratory equipment and is ideally suited for on-site use.


Harting wins international design award

02 January, 2011 | Supplied by: HARTING Pty Ltd

The Han-Yellock connector has taken the iF product design award 2011.


Dodge Grid-Lign couplings size 1200T

20 December, 2010 | Supplied by: Baldor Australia Pty Ltd

Dodge Grid-Lign couplings now include size 1200T to provide solutions for attaching shafts from 1.27 to 33 cm. Torque capacity ranges from 52 to 186,425 Nm.


Belden Infinity C-TC+ and FCC cables enhanced

20 December, 2010 | Supplied by: Belden Australia Pty Ltd

Belden has announced a series of enhancements to its Infinity C-TC+ and FCC cables. With the addition of Belflex jackets, these cables offer improved flexing capabilities, resistance to sunlight, oil and abrasion, and the ability to withstand temperature ranges of -40 to +90°C (cold impact) and -50 to +90°C (cold bend).


Raytek Pi20 thermal imaging camera

20 December, 2010 | Supplied by: ECEFast

The Raytek Pi20 thermal imaging camera has a full resolution of 320 x 240 pixels at 30 Hz and covers temperatures from -40 to 2000°C in two different models. Communications are via ethernet, with support for up to 16 cameras from one PC, and the Datatemp software allows for 64 AOI [areas of interest] to be defined with data recording, or control actions attached to each AOI. Analog and digital outputs are generated by I/O modules on the ethernet LAN, with functions being selectable during system configuration.


Dodge ISN end covers

20 December, 2010 | Supplied by: Baldor Australia Pty Ltd

A range of end covers has been introduced to the Dodge ISN bearing range. They are designed to provide an additional barrier to contamination in harsh applications.


Belden 7958A and 7957A Cat 5e industrial Ethernet cables

20 December, 2010 | Supplied by: Belden Australia Pty Ltd

Belden has added two 600 V AWM-rated, shielded cables to its DataTuff industrial ethernet range.


Turck 3- and 4-branch M16 tees

20 December, 2010 | Supplied by: Turck Australia Pty Ltd

Turck has introduced h-style (3-branch) and H-style (4-branch) M16 tees, designed for saving field installation time and hassle in comparison to hardwired cable tray installations. The tees are available in various configurations, including tees with a male connector on either side of the trunk line, integral connections or cable drops.


Rheintacho RT Strobe pocket LED stroboscope

20 December, 2010 | Supplied by: SI Instruments

The Rheintacho RT Strobe pocket LED provides light emission of 1500 lux at 6000 flashes/min at 20 cm, and is capable of up to 300,000 flashes/min.


Dodge large-bore pillow block bearings

20 December, 2010 | Supplied by: Baldor Australia Pty Ltd

Dodge has developed a range of large-bore pillow block bearings, initially with SAF dimensions, that feature integral hydraulically assisted, adapter-mounted installation and removal systems.


igus Triflex R robot accessory package

20 December, 2010 | Supplied by: Treotham Automation Pty Ltd

The Triflex R robot accessory package from igus includes over 200 components to suit many applications from large welding to small palletising robots.


Wieland Electric wipos PB1 power supplies

20 December, 2010 | Supplied by: Treotham Automation Pty Ltd

Low installation height and narrow installation spaces are often found in small distribution boards, shunting distributors and control cabinet applications.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd