Gearboxes
05 October, 2008 | Supplied by: M Rutty & Co Pty Ltd
SG worm gearboxes from Dunkermotoren are noted for their quiet running. The worm-gear shaft has bearings on both sides. The gear components, made of bronze or steel, and the lubrication ensure a long service life at the rated torque.
Ball bearings
05 October, 2008 | Supplied by: Statewide Bearings
Bearing manufacturer NKE has introduced a range of single-row deep-groove ball bearings. As one of the most commonly used type of bearing, NKE’s single-row deep-groove ball bearings offer reduced running noise, longer relubrication intervals and a low starting torque.
Power and I/O interconnects
05 October, 2008 | Supplied by: Soanar Limited
Samtec has added rugged interface products, including PowerStrip/55 high power interconnects, AccliMate and LifeJack I/O interfaces and the Tiger Eye micro rugged discrete wire system, to its standard product offering.
Thermal imaging cameras
05 October, 2008 | Supplied by: Teledyne FLIR
The i-Series cameras support electromechanical applications and will occupy the segment of the market between the FLIR i5 camera and the higher performance T-Series range. They feature an adjustable emissivity feature and thermal sensitivity better than 0.1°C.
Moulded cordsets
05 October, 2008 | Supplied by: Turck Australia Pty Ltd
Turck now has the ability to mould its 6- and 8-pin M23 powerfast connectors. These connectors may also be completely shielded by connecting a braided shield directly to the coupling nuts.
SDR-240 DIN rail power supply
05 October, 2008 | Supplied by: ADM Instrument Engineering Group
Meanwell Enterprises has launched the first model in its slim DIN rail product series, the SDR-240, for the growing demand of high-performance DIN rail power supplies. The slim design of 63.5 mm in width helps save precious space on the rail and makes it 42.8% smaller in size in comparison to the previous model.
Flat panel monitor
05 September, 2008 | Supplied by: Advantech Australia Pty Ltd
The FPM-5151G 15" (1024 x 768 resolution) LCD flat panel monitor is specifically designed for industrial applications. It features direct-VGA and DVI-D signal transmission, which allows any VGA control card to be used in a system.
Electrically insulated bearings
05 September, 2008 | Supplied by: Statewide Bearings
Bearing manufacturer NKE offers electrically insulated rolling bearings in standard sizes and in different design variations. Electrically insulated bearings provide optimal protection against bearing damage caused by electro corrosion.
Planetary gear
05 September, 2008 | Supplied by: M Rutty & Co Pty Ltd
With the ability to continuously transmit torques up to 160 Nm, the planetary gears in this range are suitable for the recently introduced BG75 brushless DC motor.
Heat exchanger
05 September, 2008 | Supplied by: Teralba Industries
The 12 m long Dimpleflo Monotube Heat Exchanger uses significantly less welds, stainless steel fittings and 180° elbows than is required by traditional 6 m heat exchangers.
Analog interface modules
05 September, 2008 | Supplied by: Turck Australia Pty Ltd
Turck has introduced the IMS interface module, designed to provide a cost-effective solution for analog signal conversion. The IMS interface module measures 6.2 mm wide, featuring one of the smallest profiles on the market today.
Lubricated mounted bearings
05 September, 2008 | Supplied by: Baldor Australia Pty Ltd
A range of industry-standard, SN-dimensioned mounted bearings from Baldor now includes value-added lubrication and strengthening features. In conjunction with a range of seal options, the Dodge SNX housing series offers machine and automation builders with high-integrity solutions for performance in long life cycle and harsh environment applications.
Split shaft seals
05 September, 2008 | Supplied by: EagleBurgmann Australia Pty Ltd
MECO custom shaft seals are built to withstand industry’s most abrasive products, including sugar, starch, salt, porcelain, gypsum, talc, silica and industrial diamonds.
Split shaft seals for abrasive, dry processes
19 August, 2008 | Supplied by: http://www.mecoseal.com
MECO custom shaft seals are built to withstand industry’s most abrasive products, including sugar, starch, salt, porcelain, gypsum, talc, silica and industrial diamonds.
NEMA 4X backlit keyboard
08 August, 2008 | Supplied by: Interworld Electronics and Computer Industries
The SL-91 NEMA 4X specification industrial keyboard from iKey is designed to accommodate rugged applications in manufacturing, materials handling and remote data entry. It features a small footprint 91-key keyboard with a rubber overlay, epoxy-coated keycaps and a plastic face guard that provide an additional layer of protection.
