Equipment

Save energy and achieve greater control with variable speed drives

17 May, 2009 by Glenn Johnson

In today’s climate of rising energy costs and carbon trading schemes, any technology which helps plants use energy more efficiently should be adopted. Variable speed drives offer the ability to control the speed and torque of motors in many applications while providing significant energy savings — but only if implemented correctly in the right application.


Voluntary recall of Fluke 333, 334, 335, 336 and 337 digital clamp meters

14 May, 2009

Fluke Corporation is voluntarily recalling a specific serial number range of Fluke 333, 334, 335, 336 and 337 digital clamp meters manufactured between 3 March 2008 and 27 February 2009.


Anti-pollution pipe stoppers

11 May, 2009 | Supplied by: Air Springs Supply Pty Ltd

OFR anti-pollution stoppers from Pronal are permanently fitted in water and sewerage lines ready for rapid inflation by remote triggering to quickly stop the pipeline as soon as an emergency arises in industrial, civil and municipal applications.


Bluetooth industrial keyboard

11 May, 2009 | Supplied by: Interworld Electronics and Computer Industries

The BT-87-TP Bluetooth-compatible, wireless industrial keyboard with integrated touchpad is fully sealed and meets NEMA 4X specifications, meaning it is resistant to dirt, dust, water, ice and corrosives. Constructed in a rugged ABS polycarbonate case with an industrial silicone rubber keypad, the BT-87-TP is submersible and easy to clean with disinfectants.


Soft starters

11 May, 2009 | Supplied by: Danfoss (Australia) Pty Ltd

The VLT Soft Starter MCD 500 is a motor starting solution with advanced start, stop and protection features, adaptive acceleration control (AAC), built-in delta connections, a 4-line graphical display and multiple programming set-up menus.


Gear units

11 May, 2009 | Supplied by: SEW-Eurodrive Pty Ltd

SEW-Eurodrive has extended its X-Series of industrial gear-units. Comprising 15 models — each with a different torque-rating — the SEW-Eurodrive X-Series allows users to closely match an X-Series gear-unit to their application. The X-Series features helical and helical-bevel gear technologies, which deliver torques from 58,000 to 475,000 Nm.


40 A power supplies

11 May, 2009 | Supplied by: Siemens Ltd

Siemens has added a compact 40 A basic unit to its Sitop modular power supply series. It is 150 mm wide, which is 90 mm narrower than the previous unit. The 20 A power supply has also been renewed and is now 70 mm wide. The two Sitop PSU300M standard mounting rail power supplies for connection to three-phase 400-500 VAC networks now have a wider range input (from 320 to 575 VAC) than previous versions and they provide a reliable 24 V supply even when there are large deviations in the mains supply. The user now simply evaluates the ‘DC 24 V OK’ operating mode via an integrated dry signalling contact.


NEC-Avio thermal imaging camera

11 May, 2009 | Supplied by: Infratherm Pty Ltd

The NEC-Avio Thermo Shot F30 series thermal imaging radiometer is ultra-light at just 300 g (including batteries) and its small size of 100 x 65 x 45 mm means it can be slipped into a shirt pocket.


Biocontaminant detector

11 May, 2009 | Supplied by: Particle & Surface Sciences Pty Ltd

The ActiveCount particle counter from Lighthouse Worldwide Solutions was developed for airborne biocontaminant detection in critical areas, such as cleanrooms, food processing plants, pharmaceutical manufacturing and air-conditioning (HVAC) systems.


Gearboxes and bearings reduce a quarry’s energy and maintenance costs

09 April, 2009 | Supplied by: Baldor Australia Pty Ltd

Conveyor uptime has increased dramatically at Corcoran Concrete’s quarry in County Mayo, following a switch to Dodge-brand gearboxes and bearings from Baldor.


Pump trend report

07 April, 2009

At ACHEMA 2009, which will take place from 11–15 May in Frankfurt am Main, manufacturers of pumps, compressors and fittings will be the largest contingent of exhibitors once more. 950 from 4000 exhibitors will be from this sector. For them and the 180,000 expected visitors, surely energy efficiency will be one of the main themes again this year. Solutions that improve availability will also have high priority.


End-suction pump

02 April, 2009 | Supplied by: Grundfos Pumps Pty Ltd

The range of Grundfos NBG/NKG end-suction pumps has energy-efficient motors that conform to the MEPS Standard. Optimised flow geometries of the impeller and pump casing have reduced the hydraulic friction and thus the amount of energy consumed.


IP55 enclosures

01 April, 2009 | Supplied by: ABB Australia Pty Ltd

ABB has announced a range of IP55-rated enclosures and junction boxes. The enclosures are available in 10 sizes — with internal dimensions from 100 x 100 x 80 mm to 310 x 240 x 160 mm — and incorporate a time-saving quarter turn lid screw on some models.


Inline ATEX junction boxes

01 April, 2009 | Supplied by: Sensor Measurement

Synatel has introduced a range of ATEX-approved inline junction boxes with five-way connectors. The Synatex connectors are certified for 1D use, making them suitable for continuous hazard (zone 20) applications.


Profinet cordsets

01 April, 2009 | Supplied by: Turck Australia Pty Ltd

Turck has introduced a 4-wire Profinet cordset line that has been developed to provide plug-and-play connectivity for applications using Profinet protocols. Profinet, the fastest industrial ethernet I/O network, is compatible with existing fieldbus systems and the only network that can accomplish a line topology — especially suitable for long conveyor systems. These cordsets connect to Turck’s BL67 ethernet gateways for Profinet — which can be connected to up to 32 I/O modules per gateway — to allow smooth integration into current fieldbus structures.


  • All content Copyright © 2026 Westwick-Farrow Pty Ltd