Eaton Industries DIN rail power supplies
01 December, 2008 | Supplied by: Eaton Electrical (Australia) Pty Ltd
With global certifications, compact size and an impressive operating temperature range, the PSG series of 24 VDC power supplies fits a wide variety of applications.
Industrial, medical and sunlight readable monitors
20 November, 2008 | Supplied by: http://www.ieci.com.au/products/nav.asp?Class=1&BaseCat1=14
Sunlight Readable Monitors are suitable for situations where the monitor is exposed to direct sunlight. The monitors exhibit wide viewing angles, fast response times, high contrast ratios and extremely high brightness.
Incremental encoder signal simulator
20 November, 2008 | Supplied by: Plant Control & Automation
This instrument is a workshop tool for testing and calibrating any control equipment designed to accept square wave input signals. It enables the user to set up counters, rate meters, process timers, motor drives and many other types of industrial instruments.
Shaft seals reduce dryer cycle times
20 November, 2008 | Supplied by: http://www.woodex-meco.com
MECO seals are custom-designed and manufactured to fit individual applications.
DC servomotors
01 November, 2008 | Supplied by: M Rutty & Co Pty Ltd
The air gap dish armature in Mavilor’s MSS series DC servomotors is specially suitable for high response, giving a high and smooth torque-to-inertia ratio, non-cogging torque and low-speed velocity control.
DOL starter
01 November, 2008 | Supplied by: NHP Electrical Engineering Products Pty Ltd
NHP-Stahl has introduced a DOL electrical motor starter, a combination of an 8265 (GUB) Ex d IIC aluminium enclosure and an 8146/5 Ex e IIC GRP control station enclosure.
Clamp-on check-metering unit
01 November, 2008 | Supplied by: Siemens Ltd
The Sitrans FUP1010 is a portable clamp-on check-metering unit, specifically designed for the water and wastewater industry to measure the performance of existing flowmeters.
Control and automation enclosure
01 November, 2008 | Supplied by: Schneider Electric
The Sarel Spacial 6000 enclosure is suitable for housing control, automation and low-voltage electrical distribution equipment in commercial and industrial applications. It features four vertical uprights which come in a triangular profile for greater rigidity.
Universal signal conditioner
01 November, 2008 | Supplied by: Burkert Contromatic NZ
The loop-powered eLINE LPI signal conditioner works with most standard signal types, in one unit without jumpers (milliamps, millivolts, volts, thermocouple, RTD and resistance).
Anti-corrosion coating solution
01 November, 2008 | Supplied by: Statewide Bearings
For bearings and metal parts exposed directly to corrosive environments, NKE Austria GmbH offers a special coating solution that provides a simple and cost-effective protection against corrosion.
Audible indicator lights
01 November, 2008 | Supplied by: Micromax Pty Ltd
Banner Engineering’s Ez-Light audible indicator lights are designed for operator guidance and indication of equipment status. These rugged indicators feature multi-coloured, long-lasting LEDs, deliver a convenient solution for displaying the status of remote and inaccessible sensors, and minimise the need for costly and inconvenient bulb replacements.
Documenting process calibrator
01 November, 2008 | Supplied by: AMS Instrumentation & Calibration Pty Ltd
The Beamex MC4 is a compact-sized documenting process calibrator. Being a multifunction calibrator, the MC4 is suitable for calibrating various process parameters, such as pressure, temperature and electrical signals.
Turck instrumentation enclosures
01 November, 2008 | Supplied by: Turck Australia Pty Ltd
Turck’s BL20 motor starter economy module utilises SWIRE technology to provide daisy-chain connection from a single I/O slice to each motor starter via a ribbon cable.
Open-frame LCD monitors
01 November, 2008 | Supplied by: Interworld Electronics and Computer Industries
The OPD series of open-frame industrial monitors includes the latest OPD-11x6 series TFT LCDs. Open-frame monitors are supplied without a front bezel or surround giving the end user or systems integrator a greater choice of mounting options. Open-frame monitors can be easily integrated into racks, panels and custom equipment housings during the design stage.
Instrumentation enclosures
01 November, 2008 | Supplied by: ERNTEC Pty Ltd
The 400 series line of moulded miniature enclosures is suitable for instrumentation and telecommunications equipment from handheld to desktop sizes. The instrumentation enclosures are manufactured according to IP54 IEC 529 specifications. They are available in a range of customised sizes.
