Instrumentation > Temperature

Food temperature measuring system

18 May, 2009 by

The Datapaq Food Tracker profiling system is a multi-channel method of measuring the actual product and ambient temperature throughout cook, fry and chill processes.


Bimetal temperature transmitter

11 May, 2009 by

The Series BTO bimetal thermometer with transmitter output is designed to take remote readings along with measurements via a bimetal helix.


Temperature switch with rotating set-up dials

01 April, 2009 by

The compact TK series switch and its 316 stainless steel RTD probe measure only 72 mm and the probe is directly mounted into a pipe. Two mechanical set-up dials rotate to quickly establish the setpoint and resetpoint temperatures. The switch’s high accuracy ensures that the setpoint does not drift and calibration is not required.


Non-contact temperature sensor

01 January, 2009

The PyroEpsilon series is a range of high-quality, low-cost, compact sensors which measure the temperature of inaccessible or moving objects and materials. They can measure temperatures from -20 to 500 °C, accurately and consistently, with a response time of 240 ms.


Resistance thermometer

01 December, 2008

The TECII resistance thermometers, from tecsis, have been developed especially to resist rough industrial environments. Featuring a small mass and a robust design, they are suitable for applications with a high level of vibration.


Thermocouple/millivolt module

01 November, 2008

The VersaMax Micro thermocouple (Type K, J, E, S, T, B or N)/millivolt (±50 or 100 mV) expansion module can be used in a wide range of temperature monitoring and controlling, as well as weighing applications.


Laser infrared thermometer

01 November, 2008

The optris CT laser infrared thermometer facilitates non-contact temperature measurement with precise aiming from -40 to 975  °C. It can measure low and high temperatures of the smallest spots, from 0.9 mm.


Fluid property analyser

05 October, 2008

The Fluid Property Analyser (FPA) is an innovative and robust sensor designed and manufactured by Measurement Specialties which simultaneously and directly measures the viscosity, density, dielectric constant and temperature of fluids.


Temperature and humidity sensors

05 October, 2008

Delta Ohm has released a series of analog and digital temperature and humidity transmitters. The HD9817 series feature compact self-contained transmitters with analog (0-1 V) and digital (RS232 and USB) outputs.


Wireless temperature and humidity system

05 October, 2008

The Saveris radio probes measure temperature and humidity. The probes save their measurement data and send it to the central base at regular intervals. If a limit value is exceeded, a radio link is established immediately.


Measuring boiler and furnace temperatures — replacing welded thermocouples without shutting down

15 September, 2008 by Paul Aloia*

Protection tubes and flexible sensors make it possible to replace thermocouples without shutting down the entire process for days or weeks.


Wireless temperature and humidity sensor

05 September, 2008

Banner Engineering has introduced the SureCross temperature and humidity sensor, optimised for use with the company’s SureCross wireless network.


Wireless temperature nodes

08 August, 2008

Banner Engineering Corp has announced analog thermocouple and RTD instrumentation nodes for the SureCross wireless network. Designed and purpose-built for Banner’s SureCross wireless network, these nodes are available in versions to support thermocouple/thermistor inputs and 2-, 3- and 4-wire RTDs.


Leak/overtemperature detection relay

08 August, 2008

The Series LDT relay is used to monitor the shaft seal and the stator temperature of a submersible pump to detect a leak or overtemperature before pump failure.


Explosion-proof temperature transmitter

08 July, 2008

The series TTE is a suitable product for hazardous temperature measurement applications. This transmitter has seven preprogrammed temperature ranges that are selectable via an internal dipswitch. For those applications that need a custom range, the transmitter can easily be field configured for any range between -29 to 121°C with a minimum span of 4.4°C.


  • All content Copyright © 2026 Westwick-Farrow Pty Ltd