Instrumentation > Temperature

Hart Scientific 5606 and 5607 full immersion PRTs

07 February, 2010 by

The Hart Scientific 5606 and 5607 full immersion PRTs are designed to perform in full immersion applications where both the transition junction and the lead wires must withstand temperatures covering the entire operating range of the probe. Such applications can include calibration or validation of sensors used in laboratory or bio freezers, walk-in refrigerators, autoclaves, ovens, stability test chambers, furnaces or incubators.


Ircon Modline 6 series of infrared thermometers

15 January, 2010 by

Ircon has introduced the Modline 6 series of infrared thermometers. This line of sensors features advanced signal processing and background-reflected energy compensation capabilities and includes one- and two-colour fibre-optic IR devices designed for harsh operating environments.


Temperature measurement and calibration: what every instrument technician should know

11 December, 2009

Temperature may be the most commonly measured physical parameter. Yet there have never been so many ways to measure it as there are today.


Temperature measurement with single-, dual- and multi-wavelength technologies

18 October, 2009 by Tom Larrick*

Temperature measurement is complicated by the fact that the amount of infrared energy emitted by a surface is proportional to the emissivity as well as the temperature of the measured target.


Dewpoint transmitters

29 September, 2009 by

The EE371 and EE372 dewpoint transmitters from Austrian company E+E are designed to meet the need for more extensive monitoring of dewpoint temperature in air systems and dryers. Using a special monolithic measurement cell, type HMC01, the system achieves a measurement accuracy of ±2C Td.


Temperature transmitters

29 September, 2009 by

Noshok’s 850 series electronic indicating temperature switch/transmitter utilises PT100 technology to provide continuous temperature monitoring, electronic temperature switching and 4-20 mA analog output while providing local digital indication.


IR thermometer system

25 September, 2009 by

Ircon has introduced an enhanced version of its Modline 5R infrared thermometer with advanced signal detection and attenuation alarming capabilities. The Modline 5 Series 5R ratio sensors are designed for non-contact, infrared temperature measurement applications involving harsh industrial environments.


RHP humidity and temperature transmitter

30 July, 2009

The series RHP humidity/temperature transmitter combines the voltage or current humidity transmitter output with a passive temperature thermistor or RTD output.


Four-channel wireless temperature transmitter

09 June, 2009 by

The Rosemount 848T wireless temperature transmitter is designed for high-density temperature measurement. With four-channel efficiency adding to the installation cost savings of Smart Wireless technology, it is designed to reduce the per point cost and thereby deliver more measurement data for use in improving operations and maintenance.


Food temperature measuring system

18 May, 2009 by

The Datapaq Food Tracker profiling system is a multi-channel method of measuring the actual product and ambient temperature throughout cook, fry and chill processes.


Bimetal temperature transmitter

11 May, 2009 by

The Series BTO bimetal thermometer with transmitter output is designed to take remote readings along with measurements via a bimetal helix.


Temperature switch with rotating set-up dials

01 April, 2009 by

The compact TK series switch and its 316 stainless steel RTD probe measure only 72 mm and the probe is directly mounted into a pipe. Two mechanical set-up dials rotate to quickly establish the setpoint and resetpoint temperatures. The switch’s high accuracy ensures that the setpoint does not drift and calibration is not required.


Non-contact temperature sensor

01 January, 2009

The PyroEpsilon series is a range of high-quality, low-cost, compact sensors which measure the temperature of inaccessible or moving objects and materials. They can measure temperatures from -20 to 500 °C, accurately and consistently, with a response time of 240 ms.


Resistance thermometer

01 December, 2008

The TECII resistance thermometers, from tecsis, have been developed especially to resist rough industrial environments. Featuring a small mass and a robust design, they are suitable for applications with a high level of vibration.


Thermocouple/millivolt module

01 November, 2008

The VersaMax Micro thermocouple (Type K, J, E, S, T, B or N)/millivolt (±50 or 100 mV) expansion module can be used in a wide range of temperature monitoring and controlling, as well as weighing applications.


  • All content Copyright © 2020 Westwick-Farrow Pty Ltd