Eltra single-turn angular position transducer
06 July, 2011 byThe Eltra single-turn angular position transducer provides an analog output proportional to shaft position. The sensing device is an 8- or 12-bit absolute magnetic encoder, and integrated electronics converts the reading into an analog signal of 0-5 V, 0-10 V, 0-20 mA or 4-20 mA.
Hengstler S21 sine wave encoder
12 April, 2011 byThe Hengstler S21 sine wave encoder features a wide operating temperature range of -15 to +120°C and a high limiting frequency.
Parker PROmech precision linear positioner family
25 February, 2011 byThe PROmech family of positioners is designed for OEMs needing simple positioning solutions for instrument and light industrial applications.
Parker 400XR precision linear positioner family
25 February, 2011 byThe 400XR precision linear positioner family is designed for high accuracy, strength and speed to suit modern industrial applications. Their rugged construction and sealed design make them suitable for such applications as packaging and material handling. The 400XR series is also widely used in industries such as life sciences, fibre optics and instrumentation.
Camille Bauer angular transducers
25 February, 2011 byCamille Bauer angular transducers employ highly accurate, absolute-angle measurement techniques based on moving capacitor vane principles. The non-contact measurement method provides very high angular resolution, an inherent absolute measurement of angle and very high reliability.
Hengstler RI64 incremental encoder
25 February, 2011 byThe Hengstler RI64 incremental encoder has a robust design, making it high-shock and vibration resistant, and is commonly used for feedback in asynchronous motors and industrial applications.
Posital Optocode series of absolute encoders
27 January, 2011 byPosital’s Optocode series of absolute encoders with industrial ethernet interfaces is designed for high-speed requirements in robot cells and press lines, transfer lines, handling tasks and further applications in industries such as automobile production.
ASM PMIR7 series incremental encoder magnetic rings
20 December, 2010 byThe Posirot PMIR7 series incremental encoder magnetic rings from ASM are available in three sizes to accommodate different shaft sizes and yield up to 184,320 pulses per revolution in conjunction with the quadrature encoder read head PMIS4. Both units were designed to operate in harsh environments.
AMCI R11 resolvers
17 December, 2010 byAMCI has announced recent mechanical advancements made to the R11 (size 11 resolvers) that increase reliability and maximise equipment uptime.
Fraba/Posital multiturn hollow-shaft SSI rotary encoder
09 December, 2010 byFraba/Posital has extended its range of SSI rotary encoders to include a compact multiturn hollow-shaft model that has the option of local or remote reset to zero for the output code, as well as standard A/B incremental output channels - all housed in the same housing, eliminating the need for two encoders in many drive applications.
Fraba/Posital MCD heavy-duty stainless steel encoders
18 November, 2010The MCD heavy-duty absolute encoder from Fraba/Posital is based on the latest magnetic technology. The stainless steel housing with IP69K protection makes the encoder resistant to most chemicals and cleaning substances as well as high-pressure water jets. Combined with the sturdy ball bearings (for high shaft loads up to 300 N) this sensor is suitable for reliable measurement under extreme environmental conditions and outdoor applications.
AMO Corporation LMB-410 spar linear encoder
29 October, 2010 byThe IP67-rated LMB-410 spar linear encoder from AMO Corporation comes with a stainless steel carrier, offering robust measuring/position feedback with performance similar to a linear optical encoder.
Penny+Giles NRH280DP rotary position sensor
17 September, 2010 byThe NRH280DP rotary position sensor from Penny+Giles features a co-moulded, fully encapsulated sensor system that can withstand high shock and vibration as well as operate up to 170°C and endure high-pressure washdowns (IP69K).
Penny+Giles SRH220DR rotary position sensor
17 September, 2010 byThe SRH220DR rotary position sensor from Penny+Giles is designed to provide reliable and accurate rotary position measurement in harsh industrial environments where shock, vibration and extreme temperatures can occur. The dual redundant output, contactless rotary position sensor features integrated six-way connectors using a factory-programmable Hall-effect sensor system.
AMCI DuraCoder stainless steel rotary encoders
23 August, 2010 byAMCI DuraCoders with stainless steel housings have an IP69K rating for operation in extreme conditions, and a high shaft load rating, providing a longer life cycle.
