Eltra single-turn angular position transducer
The Eltra single-turn angular position transducer provides an analog output proportional to shaft position. The sensing device is an 8- or 12-bit absolute magnetic encoder, and integrated electronics converts the reading into an analog signal of 0-5 V, 0-10 V, 0-20 mA or 4-20 mA.
Unlike a potentiometer, there is no sliding contact so the operational life is limited only by bearings and seals. The non linearity is also improved over potentiometric devices. Measuring ranges include 90, 180, 270 and 360°. The transducers are enclosed in a rugged enclosure with sealing up to IP67. Models with flange mounting or hollow shafts are available for a variety of shaft sizes. Power supply can be 5 V or 12-28 VDC. An optional reset input is also available on some models. Operating temperature is up to 85°C.
Phone: 08 9309 1896
TR Electronic WPS encoder cable pull mechanism
The WPS cable pull mechanism for the C__582 series rotary encoders from TR Electronic is designed...
Turck BIxR-W20 series inductive ring sensors with IO-Link
Turck has expanded its sensor portfolio with a new range of inductive IO-Link ring sensors...
NORD Drivesystems NORDAC FUSION drive solution
NORDAC FUSION combines asynchronous motors (IE3) and permanent magnet synchronous motors (IE5+)...
