NORD IE4 motors
19 September, 2018 by | Supplied by: NORD DRIVESYSTEMS (Aust) Pty LtdThe IE4 synchronous motors are economical due to the use of permanent magnets in the rotor while high efficiency remains unchanged, even during partial load operation and at low speeds.
maxon motor EC-I 30IE 5-wire brushless DC motor
14 September, 2018 by | Supplied by: maxon motor Australia Pty LtdThe EC-I 30IE motor features a 5-wire connection to simplify implementation and still give a wide functionality.
Lapp EPIC MH modular connector system
13 September, 2018 by | Supplied by: LAPP Australia Pty LtdLapp is introducing to Australia its EPIC MH module systems that combine energy, signals and data in one connector.
NORD NORDAC BASE – SK 180E ATEX-compliant frequency inverter
07 September, 2018 by | Supplied by: NORD DRIVESYSTEMS (Aust) Pty LtdThe NORDAC BASE – SK 180E is an ATEX-compliant, decentralised frequency inverter that allows for economical operation and offers protection class IP69K.
Advantech FPM-7002 series monitors
07 September, 2018 by | Supplied by: Advantech Australia Pty LtdThe modular design of the FPM-7002 monitor allows the video I/O, which includes HDMI, DVI, VGA and DP, to be flexibly configured for enhanced functionality.
Dwyer Series 490W hydronic differential pressure manometer
01 September, 2018 by | Supplied by: Dwyer Instruments (Aust) Pty LtdThe Series 490W utilises wireless transducers and a handheld HMI so that a single operator can monitor and balance a hydronic system in less time.
Micro Epsilon Microscopic lens thermal imager
01 September, 2018 by | Supplied by: Bestech Australia Pty LtdThe Microscopic lens from Micro Epsilon makes it possible to monitor the temperature of ultra-small objects.
Interworld Electronics AEX-119P stainless steel computer display
30 August, 2018 by | Supplied by: Interworld Electronics and Computer IndustriesThe AEX-119P stainless steel computer display is fully sealed to IP66, tested to meet ATEX Zone 2 standards and IECEx conformity for Class 1 Division 2 hazardous applications.
HRS R Series scraped surface heat exchanger
23 August, 2018 by | Supplied by: HRS Heat Exchangers Australia New ZealandDesigned for both hygienic and industrial applications, the R Series from HRS Heat Exchangers uses a rotary scraper bar capable of rotational speeds up to 300 rpm.
WIKA CPH7000 portable process calibrator
20 August, 2018 by | Supplied by: WIKA AustraliaWith the CPH7000 portable process calibrator, high-pressure measuring instruments can now be tested in the field for pressures up to 10,000 bar.
Pruftechnik Optalign Smart RS5 Optical Alignment System
01 August, 2018 by | Supplied by: TechRentalsThe Pruftechnik Optalign Smart RS5 is designed to accurately measure relative shaft movement in five degrees of freedom.
Ralston Instruments PSV test suite
30 July, 2018 by | Supplied by: Ralston Instruments LLCWith the Ralston Instruments PSV test suite of software and hardware, it is possible to conduct a pressure safety valve test and record most of the information on the calibrator.
OKW SMART-TERMINAL enclosures
27 July, 2018 by | Supplied by: ROLEC OKW Australia New Zealand P/LThe SMART-TERMINAL enclosure range has a uniform profile cross-section with variable length design as well as matching accessories to allow a flexible variety of applications in a tabletop or wall-mounted version.
Hioki PW3390 power analyser
24 July, 2018 by | Supplied by: Power Parameters Pty LtdThe Hioki PW3390 power analyser is suitable for testing of mains power frequency and power electronics, high frequency power measurements including applications such as solar and wind farms, variable speed drives and electric vehicles.
Hioki SP3000-01 contactless voltage probe
12 July, 2018 by | Supplied by: Power Parameters Pty LtdThe SP3000-01 contactless voltage probe is suitable for the servicing and investigation of electronics where it is impossible to establish contact with metal terminals.
