Equipment

Extremely mobile — a crane for loads up to 500 tons

10 May, 2019 | Supplied by: Treotham Automation Pty Ltd

A purpose-built process crane with a lifting capacity of 500 tons and special capabilities for unbalanced loads needed reliable signal and energy transmission.


Alfa Laval twin screw pump

08 May, 2019 | Supplied by: Alfa Laval Pty Ltd

The Alfa Laval twin screw pump is designed for handling fluids that are sensitive, abrasive and either high or low viscosity.


Exair hazardous location cabinet cooler systems

07 May, 2019 | Supplied by: Compressed Air Australia Pty Ltd

Exair's Hazardous Location Cabinet Cooler systems have achieved the UL classified designation for Div1 environments.


PULS DIMENSION QT40.241-B2 power supply

03 May, 2019 | Supplied by: Control Logic Pty Ltd

The PULS DIMENSION QT40.241-B2 is a three-phase 960 W DIN rail power supply with an IO-Link interface.


Ölflex SERVO FD 796CP servo cable

01 May, 2019 | Supplied by: LAPP Australia Pty Ltd

The Ölflex SERVO FD 796CP is an EMC-compliant servo cable supplied by LAPP and designed to allow for much faster speed and accelerations.


Fluke Calibration 5322A Electrical Tester Calibrator

01 May, 2019 | Supplied by: Fluke Australia Pty Ltd

The 5322A electrical tester calibrator helps technicians comply with regulatory standards faster than with traditional multiple-instrument methods.


ABB Food Safe motors and bearings

23 April, 2019 | Supplied by: ABB Australia Pty Ltd

ABB has launched a full range of stainless steel IEC Food Safe motors and mounted ball bearings designed for the harsh washdown conditions in the food industry.


HARTING presents Single Pair Ethernet at Hannover Messe

05 April, 2019 | Supplied by: HARTING Pty Ltd

HARTING has presented Single Pair Ethernet solutions at Hannover Messe along with its smallest ever multipurpose connector.


Novaris IS surge and lightning protectors

28 March, 2019 | Supplied by: Control Logic Pty Ltd

The Novaris IS range of surge and lightning protection products is designed specifically for hazardous areas.


Power supply in overhead cranes: energy chains vs festoons

27 March, 2019 | Supplied by: Treotham Automation Pty Ltd

Reliable and dynamic cable management is one of the greatest challenges in modern crane technology.


Siemens SIRIUS ACT push-buttons and signalling devices

26 March, 2019 | Supplied by: APS Industrial

APS Industrial is now offering the Siemens SIRIUS ACT range of push-buttons and signalling devices.


APS Industrial to distribute Rittal's Ri4Power modular switchboards

22 March, 2019

APS Industrial has become the exclusive distribution partner for Rittal's Ri4Power type-tested modular switchboard system.


E2S Warning Signals D1xB2 xenon and LED explosion-proof beacons

13 March, 2019 | Supplied by: Mechtric Pty Ltd

The latest additions to the D1x range of beacons from E2S Warning Signals, the D1xB2 xenon and LED explosion-proof beacons, are designed for installation in hazardous areas.


NORD Drivesystems 9x0072.1 series bevel gear units

06 March, 2019 | Supplied by: NORD Drivesystems (Aust) Pty Ltd

Nord Drivesystems has launched the SK 9x0072.1 series of NORDBLOC.1 bevel gear units that are washdown-optimised for hygienic applications.


Australian company improves secondary mine ventilation

04 March, 2019 | Supplied by: Minetek

A new technological solution engineered in Australia is said to offer power savings and control not yet seen in the underground mining industry.


  • All content Copyright © 2020 Westwick-Farrow Pty Ltd