Equipment

Pepperl+Fuchs hygienic cordsets

01 October, 2018 | Supplied by: Pepperl+Fuchs (Aust) Pty Ltd

Pepperl+Fuchs' latest range of hygienic cordsets offers smooth and easy-to-clean surfaces tailored to food production.


Pepperl+Fuchs GR Series glass fibre reinforced polyester enclosures

01 October, 2018 | Supplied by: Pepperl+Fuchs (Aust) Pty Ltd

The GR Series glass fibre reinforced polyester (GRP) enclosures have international approvals for a wide range of applications.


Device circuit breakers with IO-Link technology

01 October, 2018 | Supplied by: Phoenix Contact Pty Ltd

The CBMC electronic circuit breakers with integrated IO-Link can be incorporated into a process control and monitoring system.


NORD IE4 motors

19 September, 2018 | Supplied by: NORD Drivesystems (Aust) Pty Ltd

The IE4 synchronous motors are economical due to the use of permanent magnets in the rotor while high efficiency remains unchanged, even during partial load operation and at low speeds.


maxon motor EC-I 30IE 5-wire brushless DC motor

14 September, 2018 | Supplied by: maxon motor Australia Pty Ltd

The EC-I 30IE motor features a 5-wire connection to simplify implementation and still give a wide functionality.


Lapp EPIC MH modular connector system

13 September, 2018 | Supplied by: LAPP Australia Pty Ltd

Lapp is introducing to Australia its EPIC MH module systems that combine energy, signals and data in one connector.


NORD NORDAC BASE – SK 180E ATEX-compliant frequency inverter

07 September, 2018 | Supplied by: NORD Drivesystems (Aust) Pty Ltd

The NORDAC BASE – SK 180E is an ATEX-compliant, decentralised frequency inverter that allows for economical operation and offers protection class IP69K.


Advantech FPM-7002 series monitors

07 September, 2018 | Supplied by: Advantech Australia Pty Ltd

The modular design of the FPM-7002 monitor allows the video I/O, which includes HDMI, DVI, VGA and DP, to be flexibly configured for enhanced functionality.


Micro Epsilon Microscopic lens thermal imager

01 September, 2018 | Supplied by: Bestech Australia Pty Ltd

The Microscopic lens from Micro Epsilon makes it possible to monitor the temperature of ultra-small objects.


Dwyer Series 490W hydronic differential pressure manometer

01 September, 2018 | Supplied by: Dwyer Instruments (Aust) Pty Ltd

The Series 490W utilises wireless transducers and a handheld HMI so that a single operator can monitor and balance a hydronic system in less time.


Interworld Electronics AEX-119P stainless steel computer display

30 August, 2018 | Supplied by: Interworld Electronics and Computer Industries

The AEX-119P stainless steel computer display is fully sealed to IP66, tested to meet ATEX Zone 2 standards and IECEx conformity for Class 1 Division 2 hazardous applications.


HRS R Series scraped surface heat exchanger

23 August, 2018 | Supplied by: HRS Heat Exchangers Australia New Zealand

Designed for both hygienic and industrial applications, the R Series from HRS Heat Exchangers uses a rotary scraper bar capable of rotational speeds up to 300 rpm.


WIKA CPH7000 portable process calibrator

20 August, 2018 | Supplied by: WIKA Australia

With the CPH7000 portable process calibrator, high-pressure measuring instruments can now be tested in the field for pressures up to 10,000 bar.


Pruftechnik Optalign Smart RS5 Optical Alignment System

01 August, 2018 | Supplied by: TechRentals

The Pruftechnik Optalign Smart RS5 is designed to accurately measure relative shaft movement in five degrees of freedom.


Ralston Instruments PSV test suite

30 July, 2018 | Supplied by: Ralston Instruments LLC

With the Ralston Instruments PSV test suite of software and hardware, it is possible to conduct a pressure safety valve test and record most of the information on the calibrator.


  • All content Copyright © 2019 Westwick-Farrow Pty Ltd