Transformer isolation and noise reduction
15 November, 2006 | Systems 22 Pty Ltd
The SNAP-AITM-8 provides eight channels of thermocouple or millivolt input. Each channel can be individually configured to accept a type B, C, D, E, G, J, K, N, R, S, or T thermocouple or a -75 to + 75 mV, -50 to +50 mV, or -25 to +25 mV input.
Online starters
15 November, 2006 | Eaton Electrical (Australia) Pty Ltd
Eaton has introduced a range of small direct online starters. The compact devices offer a solution for starting applications up to 11 kW.
Validation testing
15 November, 2006 | QualMark
The Qualmark Typhoon 1.5 HALT (highly accelerated life test) chamber provides users with the ability to test the stability and reliability of electronic and electro-mechanical products at an early stage in the design and development process.
MATRIX D harmonic filters
15 November, 2006 | Westek Electronics Pty Ltd
The MTE MATRIX D series harmonic filters provide high-performance filters that are not only significantly smaller in volumetric size but weigh less through magnetic circuit design which helps to reduce their cost.
Network manager
15 November, 2006 | Control Synergy
FTS4Control (formerly NetDecoder) is an industrial control, SCADA protocol, data and timing analyser designed to help isolate problems with serial, ethernet and fieldbus networks.
IEC Ex and ATEX approved sensors
15 November, 2006 | Sensor Measurement
The Synatel Instrumentation range of products is now available with Certification of Conformity for use in Explosive Atmospheres, Category 1 or Zone 20 areas.
Pressure equipment Standards
14 November, 2006 | Intertek SAI Global
Pressure equipment, vessels and boilers have risks and hazards associated with them and the design, manufacture, testing, inspection and weld of these devices needs to meet an acceptable level of safety.
Synthetic lube
14 November, 2006 | CRC Industries Australia Pty Ltd
CRC Syntex Synthetic Lubricant is a multi-purpose product formulated to lubricate and protect surfaces. It is suitable for both light and heavy commercial use, as well as around the home and garage. It contains no acid, silicone or petroleum distillates, making it safe for use on rubber, metals, painted surfaces, fibreglass and most hard surfaces.
DC loads
06 October, 2006 | Westek Electronics Pty Ltd
The Prodigit 3350 series, high current, DC loads cover a load range of 1200 to 1800 W, maximum DC voltages of 60 V and a current range of 120 to 360 A. Applications include SMPS transient response testing and battery testing.
SmartSlice I/O for DeviceNet
06 October, 2006 | Omron Electronics Pty Ltd
The GRT1 series is a Smart Slice I/O system which allows up to 64 small input/output modules to be plugged into a single communications module.
B2XRA centrifugal pump
06 October, 2006
A self-priming centrifugal 2" pump has been released by Australian Pump Industries.
Safety instrumented system
06 October, 2006 | Yokogawa Australia Pty Ltd
Yokogawa Electric Corporation has added an optical remote control function to the ProSafe-RS, enabling integration of the instrument panel rooms and safety systems in large plants. Compatibility with Yokogawa's Centum CS3000 R3 Integrated Production Control System is also improved for greater usability.
Surface inspection
06 October, 2006 | Rheology Solutions Pty Ltd
The sample testing unit ST-4 from Optical Control Systems is designed to precisely inspect small area surfaces. The system detects impurities, holes, scratches and other irregularities and is suitable for R&D, technical centres and customer support.
Calibrator models
06 October, 2006 | Fluke Australia Pty Ltd
The Fluke 717/718 family of calibrators is suitable for calibrating transmitters, gauges and switches. The calibrators are compact, lightweight and easy to carry.
Thermocouple input module
06 October, 2006 | Systems 22 Pty Ltd
The SNAP-AITM-8 is suitable for users with applications requiring temperature monitoring, data acquisition and control.
