Infrared temperature calibration checker

The Convir FTK non-contact infrared temperature calibration checker offers a fast, low-cost and highly accurate way to ensure infrared temperature sensors are operating within calibration limits, either in the lab or on the shop floor.

Two models are available, offering two different calibration temperatures. The FTK 95 heats up to 95°C and the FTK 120 goes to 120°C. Both units reach and stabilise at these temperatures in approximately 12 mins and have an LED to show when they are up to the correct temperature. They both offer an outstanding accuracy of less than ±0.2°C drift at an ambient temperature of 20°C.

The large 50 mm target area allows all infrared temperature sensors, even those with a wide field of view, to be mounted far from the FTK, which helps to ensure there are no accuracy problems as a result of the front of the sensor being heated. The target itself has a very high emissivity of 0.98, suitable for calibration.

The FTKs are made of stainless steel to allow them to take the punishment dealt out in the harshest of industrial conditions. Being 65 x 94 mm, the FTKs are also compact enough to be portable and they can be used to check fixed infrared sensors where they are installed, a real bonus and time saver.

Each unit is supplied with a carrying case, mounting support, user manual and power supply, so they can be taken where they are needed and used quickly and easily.