Waste pumps
13 June, 2007 | Pump Systems Ltd
Industrial and hazardous wastes with suspended solids often create environmental problems in waste handling facilities in Australia and New Zealand. Stringy solids often wrap around rotating machinery and shafts and also cause clogging problems in pipe work, valves and pumps, and waste handling systems.
Quick-lock connector
13 June, 2007 | SICK Pty Ltd
The M12 standard is currently the predominant standard as far as actuator and sensor wiring is concerned in the machine installation area. There are now many different M12 systems with quick-lock connectors on the market. However, most of these systems do not have a quick-lock connector that can be used with standard sensors.
Solenoid valves for micro-dispensing
13 June, 2007 | Aviaquip Pty Ltd
The Lee VHS series micro-dispense valve is a high-speed (1200 Hz), two-way solenoid valve designed for applications that require micro- to nano-litre dispense volumes.
CMU Coriolis flowmeter
22 May, 2007 | AMS Instrumentation & Calibration Pty Ltd
The model CMU Coriolis mass flowmeter delivers more than twice the industry standard flow rate than previously available to set a new benchmark when compared to other Coriolis devices in its class. The flowmeter combines large line size service, high flow rate capability and measurement accuracy.
Network integration
22 May, 2007 | CrispTech Pty Ltd
The new MGate 3000 series from CrispTech was designed for simple integration of Modbus TCP and RTU/ASCII networks.
Water chillers
22 May, 2007 | domnick hunter Pty Limited
The Hiross Hyperchill and Hyperfree ranges of water chillers are specifically for industry use with wastage prevention as a major priority.
Safety relays
22 May, 2007 | Rockwell Automation Australia
With multi-output capabilities, the MSR142RTP and MSR144RTP relays are designed to meet a variety of safety application requirements, including those incorporating safety interlock switches, E-stops, light curtains and safety mats.
Position sensors
22 May, 2007 | ifm efector pty ltd
Cylinder sensors are used to detect the position on pneumatic C slot cylinders. The advantage is that the non-contact sensors virtually work without wear and often achieve a longer life than reed switches, saving on repair costs and down times.
Non-nuclear X-ray backscatter gauge
22 May, 2007 | TME Systems
NDC Infrared has announced the model 318 XRB sensor - a non-nuclear X-ray backscatter gauge designed as an alternative to GBS and beta sensors.
Intrinsically safe barriers
22 May, 2007 | Micromax Pty Ltd
Turck IM Series Isolating Intrinsically Safe Barriers from Micromax now have IEC Ex International approvals.
Versatile pressure transmitter
22 May, 2007 | WIKA Australia
WIKA has further extended its product range with the new IPT series of pressure transmitters directly tailored to the stringent requirements of the process industry.
Single board computer
22 May, 2007 | Boston Technology Pty Ltd
The NuPRO-842 is a full-size PICMG 1.0 Pentium 4-based single board computer (SBC) with Intel 845GV chipset. It supports both PCI and ISA buses.
Dust collector timer board
22 May, 2007 | Dwyer Omega (Aust) Pty Ltd
Dwyer Instruments Pty Ltd, the preferred source for your complete range of practical and affordable instrumentation, is announcing the release of its latest Dust Collector Timer Board, the DCT 600. The DCT 600 is available in five different models that provide from four output channels up to 22 channels, and has a choice of voltages including 240 VAC and 24 VDC.
Water pump pressure switch
15 May, 2007 | Dwyer Omega (Aust) Pty Ltd
The Mercoid series CXA water pump pressure switch is a low-cost solution for controlling automatic water systems.
Synchronised lifting system
15 May, 2007 | Larzep Australia Pty Ltd
The Larzep synchronised lifting system has been designed to operate up to 32 hydraulic actuators or cylinders from one pump.
