Products

Wireless-enabled enterprise solutions

19 August, 2007 | Invensys Operations Management (Australia) Pty Ltd

Invensys Process Systems has announced seven new wireless-enabled solutions and expanded global network implementation and support capabilities. These wireless-enabled solutions can be deployed at both the plant and enterprise levels to help improve overall industrial asset performance management.

TDI the least complex of any gauging system

17 August, 2007 | TME Systems

With NDC Infrared every sensor and every scanning frame comes with its own built-in intelligence for higher speed and greater accuracy in measurement. This distributed intelligence is achieved by a state-of-the-art processing engine called a D-BRIC. Each D-BRIC is smaller than 4 x 6" (10 x 15 cm), yet powerful enough to run an entire gauging system on its own.

GSM remote control system

17 August, 2007 | CrispTech Pty Ltd

The GSM8000 is a control/monitor/ alarm system which enables you to control remote devices via a GSM mobile phone using SMS (short message service). Devices can include a mixture of analog and digital inputs as well as digital switched outputs and relays.

Serial communication products

17 August, 2007 | Interworld Electronics and Computer Industries

Interworld Electronics can add multiple high-speed serial ports to any PC, server, thin client, laptop, PDA or embedded system.

Lock nut cylinders

13 August, 2007 | Larzep Australia Pty Ltd

The Locknut cylinders range is available in single acting mode from 30 to 1100 t in the ST series and, for confined space applications, Larzep STX pancake lock nut cylinders are available from 50 to 550 ts capacity.

Shaft collars resist corrosion

13 August, 2007 | Naismith Engineering & Manufacturing Co Pty Ltd

Ruland's range of smooth bore shaft collars in 316 stainless steel is particularly suitable for medical, food processing and pharmaceutical applications where washdown is required and contamination from corrosion must be avoided. A high level of resistance to chloride corrosion makes these shaft collars suitable for marine applications as well.

Pneumatic brakes

13 August, 2007 | PT Hydraulics Australia Pty Ltd

PT Hydraulics has introduced a line of pneumatic brakes for its Globe Vane Air Motors. Globe BN brakes are claimed to be fail-safe brakes (spring engaged, air released). They can be used as a static brake and under certain conditions in dynamic applications.

In-cylinder linear transducer range

13 August, 2007 | Control Devices Australia

Penny+Giles' range of contactless in-cylinder linear displacement transducers is designed for hostile conditions inside mobile and static hydro-pneumatic actuators. The ICT range provides analog position feedback proportional to the cylinder rod position for actuator strokes up to 2000 mm. The transducer is capable of withstanding high temperatures up to +200°C.

Controller for Pressure, Velocity and Flow Applications

19 July, 2007 | Dwyer Omega (Aust) Pty Ltd

Dwyer Instruments Pty Ltd, the preferred source for your complete range of practical and affordable instrumentation, is announcing the release of its NEW Series DHII DigiHelic Differential Pressure Controller.

Data handling

18 July, 2007 | Control Logic Pty Ltd

The Data Station Plus has an integrated protocol converter to bridge the communication gap between disparate serial and ethernet devices.

Multi-gas monitor

18 July, 2007 | Industrial Scientific Corporation

The MX6 iBrid is a multi-gas monitor that features a full-colour liquid crystal display and five-way navigation button to scroll through the menu-based operating system.

Industrial Monitors and Keyboards

18 July, 2007 | Interworld Electronics and Computer Industries

Interworld Electronics carries an extensive range of Industrial and Sunlight Readable Monitors.

Freedom from traditional constraints

18 July, 2007 | GE Intelligent Platforms Asia Pacific Pte Ltd

In the past, control systems required you to model your strategy according to the technology. With Proficy Process Systems, you are in control of how you design, implement and maintain your system.

Ethernet probe

18 July, 2007 | Beckhoff Automation Pty Ltd

Through its design, the ET2000 is claimed to be suitable both for local application on machines or in the laboratory. Four channels enable recording and analysis of separate networks or different points within the same network.

New DG-10 digital gauge from WIKA

18 July, 2007 | WIKA Australia

Electronic pressure measurement with local display is desirable in many areas of machine building and equipment engineering, in hydraulic and pneumatic applications and also for general service operations. WIKA can now offer you the ideal solution for a local, battery-operated measurement and display instrument.

  • All content Copyright © 2025 Westwick-Farrow Pty Ltd