NI CompactRIO - rugged, embedded, reconfigurable
18 June, 2007 | National Instruments Aust Pty Ltd
The National Instruments CompactRIO programmable automation controller (PAC) is a low-cost reconfigurable control and acquisition system designed for applications that require high performance and reliability. The system combines an open embedded architecture with small size, extreme ruggedness and hot-swappable industrial I/O modules.
Production data collecting
18 June, 2007 | Honeywell Building Solutions
The LETS machine interface (LMI) operator terminal enables information to be collected from production machines and fed to Honeywell’s line efficiency tracking software (LETS).
Butterfly valves
18 June, 2007 | Dwyer Omega (Aust) Pty Ltd
The Series ABFV automated butterfly valves are suitable for use in chemical and wastewater applications with a 316 SS disc and choice of EPDM, Buna-N or fluoroelastomer liner. The valves are designed with direct mount electric or pneumatic actuators for a compact valve package.
Industrial Power over Ethernet (PoE)
18 June, 2007 | CrispTech Pty Ltd
Increasing demands for Power over Ethernet (PoE) technology in industrial applications can now be met with a complete end-to-end solution from CrispTech. PoE technology lets you eliminate the need for power outlets when deploying ethernet-enabled devices. This means that VoIP phones, IP cameras and other similar devices can be connected to the network and powered by a single ethernet cable.
Web technology makes automation solutions easy
18 June, 2007 | Triarm Pty Ltd
The crucial benefit of basing control and monitoring on web technology is that an HMI application for an automation device only has to be edited once. It can then be called from all Windows PCs, PDAs and Saia Web panels. This saves duplication of expenditure and, with that, a lot of time.
Voltage-to-pressure transmitter
18 June, 2007 | Moore Industries
The EPX2 E/P transmitter is designed for use with normal instrument air, but can also be used with natural gas, making it possible to use the transmitter in remote locations where no electrical power is available to drive air compressors. Its extremely low power requirement of 3 mA at 12 VDC allows it to be powered by a battery or solar panel at remote sites. Applications include offshore oil platforms, natural gas wellheads, oil wells, pipelines and similar locations that are far from electrical power.
Rated weight indicator
18 June, 2007 | Rinstrum Pty Ltd
The X320 is an extreme environment IP68/IP69K rated weight indicator.
Polymer processing plant
17 June, 2007 | Oz Seals
The Poly4 processing machine is designed to help enhance and streamline the production of specialised polymers. It is a four-component processing plant, which automatically produces bubble-free, high-performance polymer stock. At no time during the process does any component come into contact with the atmosphere.
Waste pumps
13 June, 2007 | Pump Systems Ltd
Industrial and hazardous wastes with suspended solids often create environmental problems in waste handling facilities in Australia and New Zealand. Stringy solids often wrap around rotating machinery and shafts and also cause clogging problems in pipe work, valves and pumps, and waste handling systems.
Quick-lock connector
13 June, 2007 | SICK Pty Ltd
The M12 standard is currently the predominant standard as far as actuator and sensor wiring is concerned in the machine installation area. There are now many different M12 systems with quick-lock connectors on the market. However, most of these systems do not have a quick-lock connector that can be used with standard sensors.
Solenoid valves for micro-dispensing
13 June, 2007 | Aviaquip Pty Ltd
The Lee VHS series micro-dispense valve is a high-speed (1200 Hz), two-way solenoid valve designed for applications that require micro- to nano-litre dispense volumes.
Non-nuclear X-ray backscatter gauge
22 May, 2007 | TME Systems
NDC Infrared has announced the model 318 XRB sensor - a non-nuclear X-ray backscatter gauge designed as an alternative to GBS and beta sensors.
CMU Coriolis flowmeter
22 May, 2007 | AMS Instrumentation & Calibration Pty Ltd
The model CMU Coriolis mass flowmeter delivers more than twice the industry standard flow rate than previously available to set a new benchmark when compared to other Coriolis devices in its class. The flowmeter combines large line size service, high flow rate capability and measurement accuracy.
Network integration
22 May, 2007 | CrispTech Pty Ltd
The new MGate 3000 series from CrispTech was designed for simple integration of Modbus TCP and RTU/ASCII networks.
Water chillers
22 May, 2007 | domnick hunter Pty Limited
The Hiross Hyperchill and Hyperfree ranges of water chillers are specifically for industry use with wastage prevention as a major priority.
