Pipe repair clamp
14 February, 2008 | KCES Pty Ltd
The Straub-Clamp is used for the safe, reliable repair of gas, water and drainage pipes made from a range of materials (steels, cast iron, ductile iron, fibre cement, GRP, PE, PP, ABS, PVC).
ATEX-compliant rotary vane pump
14 February, 2008 | AVT Services Pty Limited
Edwards' EM range of ATEX-compliant rotary vane pumps for potentially explosive environments is compact and gives vacuum down to 10-4 mbar. It allows operators in the chemical industry to comply with the European ATEX directive.
Vacuum adsorption dryer
14 February, 2008 | Hitachi Global Air Power
The Zander WVM vacuum adsorption dryer delivers levels of operational and energy efficiency, eliminating the need to purge air and increasing throughput. The dryer is claimed to be able to produce energy savings of up to 15% when compared with conventional non-vacuum adsorption dryers.
Tank washer
14 February, 2008 | Spray Nozzle Engineering
The M-Series Tank Washer has self-cleaning features that ensure trouble-free operation and hydraulic water impact via good channelled water jet streams in a true 360°C spray.
Serial-to-wireless LAN module
24 January, 2008 | CrispTech Pty Ltd
The WE-2100T is a compact switch module from Moxa that can be installed in a remote serial device for an instant WLAN connection. It has a small form factor that is about half the size of a credit card, so it can be embedded into almost any type of device. TCP/IP and wireless security protocols are built into the WE-2100T for fast integration, saving programming time and effort. High-speed serial support even includes non-standard baud rates such as 250 and 500 Kbaud. A reverse SMA antenna connector allows easy connection to any external antenna system.
IR4 infrared thermometer
21 January, 2008 | Dwyer Omega (Aust) Pty Ltd
The IR4 infrared thermometer is a dual-function thermometer with laser that offers a wide infrared temperature measurement range and supports K-type thermocouple probes.
Embedded industrial computer with VGA
21 January, 2008 | CrispTech Pty Ltd
CrispTech has released the Moxa ThinkCore V481 embedded computer, now with VGA. It is powered by the Intel x86 processor and provides a VGA monitor port, dual LAN ports, eight serial ports, a CompactFlash slot, a USB port, and built-in audio and speakers.
15" TFT operator interface panel
21 January, 2008 | Control Logic Pty Ltd
Red Lion's latest addition to the G3 series of operator interfaces is the G315C touchscreen. The G315C offers a 15" TFT active matrix 32K colour XVGA 1024 x 768 pixel LCD and a 10-button keypad for on-screen menus.
Differential piston gauge
21 January, 2008 | Thermo Fisher Scientific
GE Sensing has introduced its Ruska Model 2482 differential piston gauge in response to market demand for an accurate and easy-to-use differential pressure standard for use at high static line pressures. Featuring a triple-piston assembly, this primary standard has been designed to calibrate virtually any differential pressure sensing device from 0 to 850 in H2O (2100 mbar) at line pressures up to 2900 psi (200 bar).
TDI the least complex of any gauging system
21 January, 2008 | TME Systems
With NDC Infrared every sensor and every scanning frame comes with its own built-in intelligence for higher speed and greater accuracy in measurement. This distributed intelligence is achieved by a state-of-the-art processing engine called a D-BRIC. Each D-BRIC is smaller than 4 x 6" (10 x 15 cm), yet powerful enough to run an entire gauging system on its own.
Tough metal connectors
21 January, 2008 | Weidmuller Pty Ltd
Users can securely plug the connector needed directly into machinery with very little effort - and without a single tool, according to Weidmüller. To connect simply insert the cable, press together and that's it.
Programmable controller
21 January, 2008 | Schneider Electric
Schneider Electric has released the Modicon M340 programmable controller which complements its Modicon Premium (medium to large controllers) and Quantum (large to extra large controllers) for industry and infrastructures.
Factory scheduling software
21 January, 2008 | SYSPRO
Syspro has released a range of factory scheduling software to provide the ability to schedule production in factories to a detailed level.
Screw compressor
21 January, 2008 | Yokogawa Australia Pty Ltd
The CLF series frequency controlled screw compressor is the latest product development to come from Boge. An expansion of the CL series, the compact CLF design provides a small footprint whilst a built-in frequency invertor ensures a minimal carbon footprint.
Encoder signal generator
21 January, 2008 | Plant Control & Automation
The ENC-SIM encoder signal generator is designed to simulate all the signals available from an incremental encoder. The user can set the A/B phase relationship, frequency and the actual number of pulses generated. The generator provides the user with a means of testing control circuits and instruments without the need for any mechanical movement.
