Oxygen analyser
21 January, 2008 | Novatech Controls Pty Ltd
Novatech has redesigned its top-selling 1630 model oxygen analyser. Taking advantage of advances in solid-state electronics, the series 1730 has a greater range of features while still retaining the ease of use of the 1630 series.
Full range of flow
21 January, 2008 | Duff & Macintosh
Duff & MacIntosh has introduced a new flowmeter manufacturer from the UK, Influx.
Gigabit, modular industrial ethernet switch
21 January, 2008 | CrispTech Pty Ltd
CrispTech has introduced the EDS-728, a new entry into the Moxa modular ethernet switch series that supports up to four Gigabit ports, 24 fast ethernet ports, and advanced network control.
TranSphere wireless ethernet devices
19 January, 2008 | GE Intelligent Platforms
GE Fanuc Intelligent Platforms has announced the introduction of its TranSphere Wireless communications products for automation needs. These products include extended range IP networking, wireless IP/Ethernet connectivity, and ethernet and serial communications radio modem solutions.
Industrial hotspot
19 January, 2008 | CrispTech Pty Ltd
The Radiolinx 802.11abg industrial hotspot functions as a wireless access point, repeater or client. It offers high-speed wireless ethernet communications including EtherNet/IP for linking automation systems, video cameras and plant network access for mobile workers
Online vibration monitoring system
18 January, 2008 | Maintenance Systems Consolidated Pty Ltd
The IFM Octavis online vibration monitoring system has been developed for use in a variety of industries. It is suitable for use on equipment including: pumps, spindles, compressors, fans, gearboxes and motors.
Pressure measurement in liquid chemicals
18 January, 2008 | WIKA Australia
The Wika Hydral-Line pressure measuring instruments are designed for use in liquid chemicals distribution applications. It has been adapted to the special requirements of the process equipment and UHP chemicals distribution systems.
Planetary gearhead
17 December, 2007 | Motion Technologies Pty Ltd
ValueTrue is a low-cost addition to the Micron gearhead range, with 4 arc minute backlash, eight frame sizes in true planetary inline and right-angle configurations.
Digital-to-analog video stream decoder
17 December, 2007 | CrispTech Pty Ltd
The VPort D351 is a 1-channel industrial video decoder that can rapidly decode network video and audio streams from Moxa's VPort series of video encoders and IP cameras, and then send the analog signals back to traditional CCTV equipment. The decoder is designed to link to standard analog CCTV devices, such as the monitors, multiplexers and matrix switches used in many surveillance applications. Users can easily bridge existing analog video surveillance systems to a Moxa IP-based video surveillance network. In addition, a bi-directional audio function enables real-time voice over IP communication between Moxa's industrial video encoder and decoder, and the transparent PTZ control allows instant control of remote PTZ controllers at the control site.
Infrared temperature calibration checker
17 December, 2007 | Heastern Industries
The Convir FTK non-contact infrared temperature calibration checker offers a fast, low-cost and highly accurate way to ensure infrared temperature sensors are operating within calibration limits, either in the lab or on the shop floor.
Design software update
17 December, 2007 | Autodesk Australia
With the release of Autodesk Inventor Service Pack 1, Autodesk Inventor software is fully supported on the Windows Vista operating system. Customers with Inventor 2008 and Windows Vista will enjoy the native support of the Microsoft Direct3D application programming interface, the underlying graphics technology for Windows Vista and all 64 bit Windows systems.
IDC-based power connection
17 December, 2007 | Weidmuller Pty Ltd
The FieldPower product concept is based on the PowerBox, which is used to contact 5-pole power cables ranging from 2.5 to 6 mm2. The PowerBox integrates the following functions in a single module: power supply, extension, outgoing motor feeder and distribution. The PowerBox is mounted at any point within the plant with the continuous, uncut cable placed inside. Thanks to colour coding this is done quickly and without errors. Round and/or flat cables can be utilised. Using a sheath stripping tool, the cables are partially stripped and the individual cores are placed into the base module of the connection block and the contact unit snapped shut. Using a screwdriver, the contact element is simply closed downwards in a 90° movement. This creates a safe and reliable contact for distributing 400 V of power. The connection is made utilising IDC connection technology.
Thermal imager with data logging
17 December, 2007 | Emona Instruments Pty Ltd
The HotShot thermal imaging cameras from Electrophysics Corp have an in-built PDA type touch screen and Qwerty keyboard for data entry and data logging functions.
TDI the least complex of any gauging system
17 December, 2007 | TME Systems
With NDC Infrared every sensor and every scanning frame comes with its own built-in intelligence for higher speed and greater accuracy in measurement. This distributed intelligence is achieved by a state-of-the-art processing engine called a D-BRIC. Each D-BRIC is smaller than 4 x 6" (10 x 15 cm), yet powerful enough to run an entire gauging system on its own.
Wastewater analyser
17 December, 2007 | Endress+Hauser Australia Pty Ltd
Endress+Hauser have launched an inline analyser for municipal and industrial wastewater treatment plants. The new STIP-scan device overcomes the costly sampling and maintenance procedures required by historical 'cabinet analysers' since it operates directly in the process.