Compact field controllers
08 July, 2008 | National Instruments Aust Pty Ltd
National Instruments has announced three Compact Fieldpoint Controllers that deliver increased performance, higher processor speed and significantly improved ethernet throughput. The NI cFP-2220, cFP-2210 and cFP-2200 controllers include a 400 MHz PowerPC processor and Wind River VxWorks real-time operating system (RTOS) for greater processing power and faster data analysis.
Red Lion CUB5 Series analog panel meters
08 July, 2008 | Control Logic Pty Ltd
Red Lion has announced its CUB5 Series analog panel meters that have a footprint that is 30% smaller than conventional 48 x 96 mm meters.
Safety system
08 July, 2008 | HIMA Australia
The XMR system architecture of the HIMax safety system allows users to adjust the redundancy of individual modules to the requirements of the differing process loops. XMR refers to the degree of modular redundancy in the system, with ‘x’ assuming any value between one and four.
Coupling pads for ultrasonic flowmeters
08 July, 2008 | AMS Instrumentation & Calibration Pty Ltd
Flexim’s small black pads add to the long-term durability of clamp-on ultrasonic flowmeters.
FLIR Systems T-series handheld infrared cameras
08 July, 2008 | Teledyne FLIR
FLIR Systems has added two camera models to its T-series, a compact handheld infrared camera range for industrial and technical applications.
2-wire level switch
08 July, 2008 | AMS Instrumentation & Calibration Pty Ltd
The NuTec LS2000 level switch from Fluid Components International is designed for 2-wire, 4-20 mA loop power that allows the LS2000 to serve as a drop-in replacement for other 2-wire mechanical float and paddle switches without any wiring modifications during plant retrofit projects, which simplifies installation and reduces cost. The LS2000 is also available for 115/230 VAC or 24 VDC input power and a 6 A relay output.
Chemical motor pump
08 July, 2008 | Australian Pump Industries Pty Ltd
The Aussie Pacer S2 is a high-performance 50 mm motor pump designed specifically for chemical handling in beverage and food production.
Linear motors and slide components
08 July, 2008 | Motion Technologies Pty Ltd
Linmot linear motors and Gimatic slide parts and components are designed for most end-of-arm tooling needs and robotic systems.
DC motors with integrated drives
08 July, 2008 | M Rutty & Co Pty Ltd
The GR53 and GR63 motors from Dunkermotoren are cost-effective DC commutator motors with comprehensive digital electronic regulation and control.
Festo MS6-SFE flow sensor
08 July, 2008 | Festo Pty Ltd
Capable of operating as a standalone flow sensor, or as part of an MS6 service unit combination, the MS6-SFE features a clearly laid out, backlit LCD showing flow or consumption data combined with a choice of output options.
Valve and pipe labelling system
08 July, 2008 | Air & Hydraulic Systems Pty Ltd
Praher Valves has released a colour-coded labelling system for valves and pipe clips.
Compact vacuum conveyor
08 July, 2008 | PIAB Vacuum Technologies
The C2100-64, compact vacuum conveyor is engineered to be small yet powerful. It quietly and hygienically conveys powder and bulk materials in production areas with confined space or in buildings with very low ceilings. Powered by Coax technology, the C2100-64 is able to transport up to 1.0-1.5 t/h of powders or granular material.
Flowmeters for water treatment
08 July, 2008 | H2O Rx
The materials used in the construction of Titan flowmeters are of the highest standard and include AISI316 stainless steel, engineering plastics and sapphire. Extensive use is made of plastic materials such as PEEK and PVDF, also chosen for their inherently good chemical resistance.
Brushless DC motors
08 July, 2008 | M Rutty & Co Pty Ltd
The GR 22, G 30.1 and G 30.0 motors are now available in versions with neodymium magnets. Compared with the basic version of the motors with ferrite magnets, they offer up to 30% higher starting torque. The speed characteristic of these motors under load is marked by a flatter characteristic curve and thus smaller variations in speed.
Faulhaber linear DC servomotor
08 July, 2008 | ERNTEC Pty Ltd
The LM 1247 series linear DC servomotor by Faulhaber, with dimensions as small as 12.5 x 47 mm and a weight of merely 56 g, can produce a peak force of up to 9.4 N at full power. The standard product has a stroke length of 20 mm and is optionally available up to 80 mm.
