Products

Abrasion-resistant tube

14 March, 2009 | SMC Australia | New Zealand

SMC Pneumatics has released an abrasion resistant tube for use in areas where movement of the tube can be expected. The TUZ range of tube is designed to withstand abrasion that comes from tube flexing and movement especially within a flexible cable train environment.

Pneumatic cylinder cushioning system

14 March, 2009 | Festo Pty Ltd

The PPS self-adjusting pneumatic cushioning system adapts automatically to provide suitable cushioning characteristics within the permissible range. It enables fast but gentle travel into the end positions without the need for manual adjustment. This is achieved by the use of longitudinal slots which allow the air to escape in a controlled manner.

VSD filter

14 March, 2009 | Westek Electronics Pty Ltd

The Schaffner FN 530 combination sine wave/EMC output filter for variable speed drives solves three important problems for motors as loads for variable speed drives. These are: high dv/dt pulses, common mode high-frequency components and RF radiation.

RTU with spread spectrum radio

14 March, 2009 | Ovarro

Semaphore has introduced an integral spread spectrum radio option for the T-box LT compact remote terminal unit (RTU) and SCADA system.

Stainless steel cable tray

14 March, 2009 | Pentair

Hoffman has announced its expanded line of Clean Tray UL Type 1 stainless steel cable tray for power and data cable management in sanitary food and beverage processing and packaging environments. Clean Tray protects rated cabling and features a sloped-top sanitary design that minimises dirt, debris and mould build-up in addition to facilitating ease of cleaning. The Clean Tray line also includes numerous sloped-top fittings, variable angle fittings and telescopic straight sections that translate to greater installation savings and optimal sanitary performance.

Westermo ethernet extender

14 March, 2009 | Paqworks

Westermo has released a high-speed industrial ethernet extender. The DDW-120 utilises SHDSL transmission technology, allowing existing twisted pair cables to be used to establish a high-speed remote connection between two ethernet networks. With transfer rates up to 5.7 Mbps and an operating distance of up to 15 km at lower data rates, this is an easy-to-install alternative to fibre-optic or radio systems when linking remote ethernet networks.

Plant interaction hotspot tool

14 March, 2009 | Lyon MacIntyre Ltd

ExperTune’s PlantTriage software now includes a tool that graphically highlights plant interactions. Using the Interaction Hot Spots tool, engineers can quickly pinpoint the root cause of process interactions. Engineers can resolve these upsets to improve quality, energy, production rate and process uptime.

HMI with integrated controller

14 March, 2009 | Festo Pty Ltd

The FED-CEC is a flexible and space-optimised HMI system. The display unit and controller are combined in a single unit, which means that system designers have only one component to purchase, program and install. It is a space-saving controller concept, created by integrating a processor module based on the CoDeSys software platform into the Festo Front End Display range.

Operator interfaces

13 March, 2009 | Pilz Australia Industrial Automation LP

The fourth-generation Pilz PMI operator interface and diagnostic display units offer improved performance. Both the PMIvisu and PMIopen series are available in the fourth-generation specification, with the PMIvisu models being suitable for diagnostics and visualisation with PNOZmulti modular safety systems, PSS programmable safety and control systems and SafetyBUS p networks. The fourth-generation PMIvisu units can also be used as graphics systems for all common programmable logic controllers (PLCs). If custom software needs to be run on the display, then the PMIopen operator terminals can be specified.

Vectron Active frequency inverter

13 March, 2009 | Bonfiglioli Transmission Pty Ltd

Bonfiglioli’s Vectron Active range of frequency inverters can be used in a wide range of applications, from continuous drives for simple conveyor belts to complex networked applications in manufacturing plant and machinery. They are also suitable for use as portable power supplies and provide a performance range that extends from 0.37 to 800 kW.

Bi-planar chain conveyor

13 March, 2009 | Milmeq Pty Ltd

The Realcold Millers Mechanical 3D-Veyor Bi-Planer Chain Conveyor systems are especially suitable for the food processing industry and have applications in many other areas requiring conveying systems.

Leaky cable antenna

13 March, 2009 | Daanet Pty Ltd

Hirschmann Automation and Control has expanded its range of industrial WLAN products to include the leaky cable. This flexible antenna can be used to establish a pipe-shaped transmission field on the 2.4 GHz band with a range of up to 100 m. This easy-to-install solution is particularly suitable for use in long and narrow areas in buildings or production areas. The flexibility of the cable enables even corners to be lit up well.

Robotic palletising

13 March, 2009 | Foodmach Pty Ltd

Robomatrix is a high-speed palletising system developed in response to an industry-wide need for increased flexibility to handle complex product and packaging configurations.

AccuStar electronic inclinometer

13 March, 2009 | Applied Measurement Australia

Available in a range of ±60°, the AccuStar electronic inclinometer is an accurate angle measurement device. The compact and rugged sensor is suitable where space is critical and environmental conditions are serious design concerns.

Piezoelectric accelerometer

13 March, 2009 | Applied Measurement Australia

The Measurement Specialties model EGPE-2A is a piezoelectric charge mode accelerometer designed for high-frequency vibration and shock measurements.

  • All content Copyright © 2025 Westwick-Farrow Pty Ltd