Smaller process system
01 November, 2008 | GE Intelligent Platforms Asia Pacific Pte Ltd
GE Fanuc Intelligent Platforms has released Proficy Process Systems in a 250 I/O size, single-computer offering targeted at smaller applications and OEMs. Proficy Process Systems is a fully integrated process control system intended to provide customers with improved quality and reliability, increased throughput, performance and efficiency, and reduced total cost of ownership.
Anti-corrosion coating solution
01 November, 2008 | Statewide Bearings
For bearings and metal parts exposed directly to corrosive environments, NKE Austria GmbH offers a special coating solution that provides a simple and cost-effective protection against corrosion.
DC servomotors
01 November, 2008 | M Rutty & Co Pty Ltd
The air gap dish armature in Mavilor’s MSS series DC servomotors is specially suitable for high response, giving a high and smooth torque-to-inertia ratio, non-cogging torque and low-speed velocity control.
Level measuring instrument
01 November, 2008 | Endress+Hauser Australia Pty Ltd
The Liquicap T continuous level measuring instrumentation for liquids features a build-up compensation mode that overcomes performance problems normally associated with conventional capacitance/inductance level measuring probes, particularly in chemically aggressive, sticky liquid applications.
Oxygen sensor
01 November, 2008 | ABB Australia Pty Ltd
ABB has announced that it has rounded off its product range of measuring technologies for the EasyLine series of continuous gas analysers with the addition of the zirconium dioxide sensor ZO23.
Valve assembly with Profibus
01 November, 2008 | Metal Work Pneumatic Australia Pty Ltd
The heavy-duty Multimach (HDM) is a valve assembly with integrated Profibus module. It allows for the rapid addition and replacement of valves in a rugged assembly.
Safety card for servo amplifier
01 November, 2008 | Pilz Australia Industrial Automation LP
Pilz has launched a safety card for the servo amplifiers PMCprotego D, so that safety is integrated directly into the drive. When fitted with the safety card PMCprotego S, the servo amplifiers can provide a safe drive solution with numerous safety functions, ranging from safe stop and safe motion functions through to safe brake functions.
Programmable dispensing system
01 November, 2008 | STAUFF Corporation Pty Ltd
The PDS-100 from Fluid Metering Inc is a programmable dispensing system which uses precision stepper motors to control a variety of FMI’s valveless piston pumps.
Thermocouple/millivolt module
01 November, 2008 | GE Intelligent Platforms Asia Pacific Pte Ltd
The VersaMax Micro thermocouple (Type K, J, E, S, T, B or N)/millivolt (±50 or 100 mV) expansion module can be used in a wide range of temperature monitoring and controlling, as well as weighing applications.
Open-frame LCD monitors
01 November, 2008 | Interworld Electronics and Computer Industries
The OPD series of open-frame industrial monitors includes the latest OPD-11x6 series TFT LCDs. Open-frame monitors are supplied without a front bezel or surround giving the end user or systems integrator a greater choice of mounting options. Open-frame monitors can be easily integrated into racks, panels and custom equipment housings during the design stage.
DOL starter
01 November, 2008 | NHP Electrical Engineering Products Pty Ltd
NHP-Stahl has introduced a DOL electrical motor starter, a combination of an 8265 (GUB) Ex d IIC aluminium enclosure and an 8146/5 Ex e IIC GRP control station enclosure.
Proximity sensors
01 November, 2008 | Control Devices Australia
Infra International manufactures a range of inductive proximity sensors designed to fit a wide range of industrial sensing applications. All Infra proximity sensors are designed, built and quality tested in house at its factory in Italy. The sensors are available in 4, 5, 6.5, 8, 12, 18 and 30 mm diameter sizes and sensing distances from 0.8 to 20 mm.
Mobile scanning computers
01 November, 2008 | Peacock Bros Pty Ltd
Intermec’s CK3 series of handheld rugged mobile computers offer improved power storage technology and durable lightweight construction.
Compact Modbus RTU master
01 November, 2008 | Moore Industries
The microNCS Modbus RTU master and distributed I/O system can be used to send just a few, or hundreds of, process signals between the field or factory floor and a control system.
RTU for hazardous areas
01 November, 2008 | Ovarro
The Kingfisher G30 RTU has successfully completed the MET certification process for safety standards UL 1604, Electrical Equipment for Use in Class I and Class II, Division 2, and Class III Hazardous (Classified) Locations; and CSA 22.2 No. 213-M1987, Non-Incendive Electrical Equipment for Use in Class I, Division 2 Hazardous Locations.
