PLC scope software
01 December, 2008 | Supplied by: Beckhoff Automation Pty Ltd
Graphic display of curves is essential for optimising controllers and setting drive axes.
CJ2H PLC CPU
01 December, 2008 | Supplied by: Omron Electronics Pty Ltd
Omron Electronics has released the CJ2H PLC CPU. Using all the existing CJ1 cards and power supplies, the CJ2H allows users access to improvements in performance and technology while maintaining backward compatibility.
Aussies as good as gold in Laos
20 November, 2008 | Supplied by: Yokogawa Australia Pty Ltd
Australian expertise has been showcased in the development of the Phu Kham Copper-Gold Operation in Laos. PanAust Limited, which has a 90% stake in the operation, appointed Brisbane-based Ausenco Limited to design and engineer the project on an engineering, procurement and construction management (EPCM) basis.
Schneider Electric combines all operations
07 November, 2008
Schneider Electric integrates its operations to create the largest automation company in the Pacific.
Compact Modbus RTU master
01 November, 2008 | Supplied by: Moore Industries
The microNCS Modbus RTU master and distributed I/O system can be used to send just a few, or hundreds of, process signals between the field or factory floor and a control system.
Component HMIs
01 November, 2008 | Supplied by: Rockwell Automation Australia
Suitable for OEMs and other industrial operators, the Allen-Bradley PanelView Component operator interface provides the right amount of control at a cost-effective price.
1-Wire interface for SCADA RTUs
01 November, 2008 | Supplied by: Ovarro
Semaphore has introduced a 1-Wire interface for its T-Box line of SCADA system products. This interface is compatible with a T-Box MS Modular System, when equipped with a 32-bit CPU.
Smaller process system
01 November, 2008 | Supplied by: GE Intelligent Platforms Asia Pacific Pte Ltd
GE Fanuc Intelligent Platforms has released Proficy Process Systems in a 250 I/O size, single-computer offering targeted at smaller applications and OEMs. Proficy Process Systems is a fully integrated process control system intended to provide customers with improved quality and reliability, increased throughput, performance and efficiency, and reduced total cost of ownership.
Safety card for servo amplifier
01 November, 2008 | Supplied by: Pilz Australia Industrial Automation LP
Pilz has launched a safety card for the servo amplifiers PMCprotego D, so that safety is integrated directly into the drive. When fitted with the safety card PMCprotego S, the servo amplifiers can provide a safe drive solution with numerous safety functions, ranging from safe stop and safe motion functions through to safe brake functions.
Programmable dispensing system
01 November, 2008 | Supplied by: STAUFF Corporation Pty Ltd
The PDS-100 from Fluid Metering Inc is a programmable dispensing system which uses precision stepper motors to control a variety of FMI’s valveless piston pumps.
Small to midrange system controller
01 November, 2008 | Supplied by: ABB Australia Pty Ltd
The AC 700F controller is designed to close the gap between generic PLCs and complex process control systems.
ALD control system
01 November, 2008 | Supplied by: AVT Services Pty Limited
The AVT ALD system enables automation of an atomic layer deposition (ALD) process. It is a PC-based control system that is supplied with electronic hardware that is integrated with any existing ALD equipment for full automation of its process.
Programmable logic controller
01 November, 2008 | Supplied by: Direct Automation Pty Ltd
The Click PLC is the first of a range of inexpensive PLC components designed to offer practical features in an easy-to-use, compact yet expandable design. This line of micro-brick PLCs with stackable I/O modules and free programming software is suitable for first-time users as well as experienced programmers.
Motor management system
01 November, 2008 | Supplied by: Schneider Electric
TeSys T is an advanced, flexible motor management and protection system which currently supports the DeviceNet, Modbus, Profibus DP and CANopen communication protocols.
IP65 HMI bezels
01 November, 2008 | Supplied by: Soanar Limited
Human machine interfaces (HMIs) often need to be designed to protect them against water, cleaning materials and grease during production. Wincomm’s IP65 stainless steel bezels provide this protection.
