Graphic terminals
01 April, 2009 | Supplied by: Schneider Electric
The Magelis XBT GK graphic terminals can be configured and controlled to precisely match user requirements. Easily programmable using Vijeo Designer software, Magelis XBT GK terminals offer users a flexible user interface with a touch screen and keypad keys configurable simultaneously or separately.
Simatic combined active barrier and loop power supply
01 April, 2009 | Supplied by: Siemens Ltd
The Simatic human machine interface (HMI) device series now includes modular expansion units with IP65 protection. The new components in the design of the HMI devices are individually equipped for plant-specific operator control and monitoring tasks; for example, with illuminated pushbuttons, lamps, switches, USB ports or emergency stop buttons.
PLC data access module
31 March, 2009 | Supplied by: Omron Electronics Pty Ltd
Omron Electronics has released the Data Access Module (DAM01) — a small user interface for its micro PLC range. Fitting neatly into a communication board slot, the DAM01 empowers the user with knowledge of the process the PLC is controlling.
Process innovations support the Boddington Gold Project
18 March, 2009 | Supplied by: Yokogawa Australia Pty Ltd
The development of the process control system for the Boddington Gold Project in Western Australia, a joint venture by Newmont and AngloGold-Ashanti located 130 km south-east of Perth, is about to mobilise to a site-based phase. This follows an extensive design effort in Perth, Santiago (Chile), Melbourne and Brisbane. Effective teamwork by multiple partners in different physical locations has been vital to the success of the project to date.
Component object-based supervisory systems — the benefits over traditional HMI development
17 March, 2009 by Steve Garbrecht, Product Marketing Manager — Industrial Application Server, Wonderware | Supplied by: Wonderware Australia
There are several fundamental differences between component object-based and traditional tag-based human machine interface (HMI) and supervisory control and data acquisition (SCADA) products. This article explains the differences between the two methodologies and shows that significant savings in development can be achieved with a component object-based SCADA product, and explains how to calculate the savings.
VSD filter
14 March, 2009 | Supplied by: Westek Electronics Pty Ltd
The Schaffner FN 530 combination sine wave/EMC output filter for variable speed drives solves three important problems for motors as loads for variable speed drives. These are: high dv/dt pulses, common mode high-frequency components and RF radiation.
Process optimisation solution for energy generation
14 March, 2009 | Supplied by: Honeywell Building Solutions
Honeywell Process Solutions has announced its Advanced Energy Solutions, a suite of process control, monitoring and optimisation applications designed specifically for industrial power-generation facilities.
HMI with integrated controller
14 March, 2009 | Supplied by: Festo Pty Ltd
The FED-CEC is a flexible and space-optimised HMI system. The display unit and controller are combined in a single unit, which means that system designers have only one component to purchase, program and install. It is a space-saving controller concept, created by integrating a processor module based on the CoDeSys software platform into the Festo Front End Display range.
Vectron Active frequency inverter
13 March, 2009 | Supplied by: Bonfiglioli Transmission Pty Ltd
Bonfiglioli’s Vectron Active range of frequency inverters can be used in a wide range of applications, from continuous drives for simple conveyor belts to complex networked applications in manufacturing plant and machinery. They are also suitable for use as portable power supplies and provide a performance range that extends from 0.37 to 800 kW.
Operator interfaces
13 March, 2009 | Supplied by: Pilz Australia Industrial Automation LP
The fourth-generation Pilz PMI operator interface and diagnostic display units offer improved performance. Both the PMIvisu and PMIopen series are available in the fourth-generation specification, with the PMIvisu models being suitable for diagnostics and visualisation with PNOZmulti modular safety systems, PSS programmable safety and control systems and SafetyBUS p networks. The fourth-generation PMIvisu units can also be used as graphics systems for all common programmable logic controllers (PLCs). If custom software needs to be run on the display, then the PMIopen operator terminals can be specified.
Operator interfaces
13 March, 2009 | Supplied by: Pilz Australia Industrial Automation LP
The fourth-generation Pilz PMI operator interface and diagnostic display units offer improved performance. Both the PMIvisu and PMIopen series are available in the fourth-generation specification, with the PMIvisu models being suitable for diagnostics and visualisation with PNOZmulti modular safety systems, PSS programmable safety and control systems and SafetyBUS p networks. The fourth-generation PMIvisu units can also be used as graphics systems for all common programmable logic controllers (PLCs). If custom software needs to be run on the display, then the PMIopen operator terminals can be specified.
Mobility solution for SCADA
12 March, 2009 | Supplied by: Schneider Electric
Schneider Electric has extended its mobility solutions to allow operational and management personnel to monitor their factories, plants and mining sites from any location. These solutions enhance the capabilities of a SCADA network by providing access via a greater range of mobile devices.
Drive configuration tool
11 March, 2009 | Supplied by: ABB Australia Pty Ltd
The DriveConFig kit is a PC configuration tool for ABB component drives ACS55, offering fast and safe configuration of unpowered drives.
SCADA with Windows integrated security
11 March, 2009 | Supplied by: Schneider Electric
CitectSCADA V7.10 introduces support for Windows integrated security and Microsoft Windows Vista. Windows security integration allows for easier maintenance of CitectSCADA as it is no longer necessary to create and maintain user accounts within the SCADA system. Instead, users of the SCADA system can use their network username and password to access the CitectSCADA system.
Mining industry: achieving real benefits from simulators
16 January, 2009 by Will Hamilton | Supplied by: Yokogawa Australia Pty Ltd
The power, oil and gas, and chemical processing industries have been using real-time dynamic process simulation for decades and now the minerals processing industry can follow suit.