Process control systems

ICP Electronics WStrider-200A embedded controller

21 June, 2010 | Supplied by: ICP Electronics Australia Pty Ltd

The WStrider-200A rugged embedded controller is designed to operate under harsh conditions. Its aluminium die-cast enclosure and M12 watertight connector provide IP67-grade protection against dust and water and enable it to sustain high impact and resistance to vandalism.


Metso Neles RotaryGlobe valves in ASME 900 - 1500 classes

21 June, 2010 | Supplied by: Metso Automation (ANZ) Pty Ltd

Metso has expanded its iCV (intelligent control valve) range to include high-pressure classes and small sizes. The Neles RotaryGlobe high-pressure range now consists of valves in ASME 900 - 1500 pressure classes in sizes from 1 to 4.


Drives move 55 million tonnes of gravel in China

18 June, 2010 | Supplied by: Baldor Australia Pty Ltd

In the remote south-western province of Yunnan, some 2000 km from Beijing and Shanghai, Sinohydro is constructing an important piece of China’s renewable energy program. The Xiang Jia Ba dam and hydropower scheme is the nation’s third-largest hydropower system and another major step forward in China’s sustainable energy and water resource management strategies.


Wind generators use drive technology proven in Australasian industry

03 June, 2010 | Supplied by: Bonfiglioli Transmission Pty Ltd

Advanced industrial drives technologies available in Australasia are being used internationally to manufacture advanced wind power generators.


Metso iCV control valve range

17 May, 2010 | Supplied by: Metso Automation (ANZ) Pty Ltd

Metso’s iCV control valves are suitable for both general and demanding applications, especially in hydrocarbon processing plants. They are designed to help process plants to meet environmental regulations by using control valve constructions that provide high performance, reliability and control accuracy.


Watlow Ez-Zone RM multiloop temperature/process controller

17 May, 2010 | Supplied by: Cynebar

Watlow has introduced the Ez-Zone RM, a configurable multiloop temperature and process controller. The Ez-Zone RM integrates an entire assembly of control loop functionality in one DIN rail mounted package.


Beijer Electronics Exter T150-st stainless steel HMI

17 May, 2010 | Supplied by: Global Automation Asia-Pacific Pty Ltd

Beijer Electronics has added the T150-st to its Exter series of operator panels. The Exter T150-st has an acid-resistant stainless steel construction, so it is suited to those situations where acid-based cleaning agents are used.


Control Microsystems SCADAPack ProductionPLUS

28 April, 2010 | Supplied by: Control Microsystems

Control Microsystems has announced the release of SCADAPack ProductionPLUS, a pad-wide optimisation solution combining EFM and plunger lift for 30+ wells per pad. It leverages the functionality and flexibility of the company’s product suite to provide gas operators with an efficient wireless or wired sensor to enterprise application.


Hardy Instruments HI 1756-FC single-feeder control module

28 April, 2010 | Supplied by: Accuweigh Pty Ltd

Hardy Instruments’ HI 1756-FC is a single-feeder control module that mounts directly into an Allen-Bradley ControlLogix chassis.


Longwatch Video System Version 5.1

28 April, 2010 | Supplied by: Telvent Australia Pty Ltd

The Longwatch Video System Version 5.1 is available in three distinct platforms that are designed to simplify installation, configuration and application. The platforms eliminate the need for custom programming and make it easier to achieve integration with a process control, HMI/SCADA or automation control system.


Intelligence and safety

25 April, 2010 | Supplied by: Metso Automation (ANZ) Pty Ltd

The most important target for every plant manager is to keep the plant running and maximise production. A plant should be run as cost efficiently as possible, but without compromising safety.


Siemens Simatic S7-300 and S7-400 controllers with enhanced Profinet

20 April, 2010 | Supplied by: Siemens Ltd

Siemens has enhanced the Profinet functionality of its Simatic S7-300 and S7-400 controllers with Shared Device, Intelligent Device (I-Device) and Media Redundancy Protocol (MRP). These features facilitate easier system configuration - for example, in failsafe applications, leaner and more versatile topology architectures with multiple networked controllers, and higher plant availability.


Siemens Cemat version 7.1 process control system

20 April, 2010 | Supplied by: Siemens Ltd

Siemens has equipped version 7.1 of its Cemat process control system for the cement industry and associated sectors with multiple new functions. An enhanced signalling and diagnostics concept is designed to reduce plant downtimes as well as operating and maintenance costs, thus increasing plant availability and productivity.


Variable speed drive improves cement plant process control

16 April, 2010 | Supplied by: ABB Australia Pty Ltd

With an annual production capacity of approximately one million tonnes, Jura Cement is Switzerland’s second largest cement producer and is part of Jura-Holding. Jura Cement’s plants in Wildegg and Cornaux produce high-quality cement for different fields of application.


SEMF automates Sugarloaf in record time

07 April, 2010 | Supplied by: SEMF Holdings Pty Ltd

The Sugarloaf Pipeline will provide a significant boost to Melbourne’s water supply, and is a key part of the Victorian government’s three-pronged approach to securing Melbourne’s water reserves. The 70 km pipeline will transfer water from the Goulburn River, near Yea, to the Sugarloaf Reservoir, outside Yarra Glen on Melbourne’s outskirts.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd