Industrial networks & buses > Interfaces, gateways & device servers

Moxa NPort W2150A/W2250A series RS232/422/485 to wireless IEEE 802.11a/b/g device servers

09 August, 2012

The NPort W2150A/W2250A series allows secure data access with WEP/WPA/WPA2/802.1x encryption, consumes only 2.4 W of power and supports wide-temperature operation.


Secomea LinkManager Mobile

16 July, 2012

LinkManager Mobile can run on an iPhone, iPad or Android smartphones and tablets.


Moore Industries Bullet WirelessHART adapter

06 July, 2012

Moore Industries and MACTek Corporation have worked together to jointly supply the Bullet WirelessHART adapter.


Siemens Scalance X-200RNA redundant network access point

06 June, 2012

Siemens has expanded its range of industrial network products with a fault-tolerant system solution for smooth and delay-free redundancy in industrial ethernet networks.


Phoenix Contact Radioline wireless I/O system

20 May, 2012

The Radioline wireless system from Phoenix Contact distributes signals via wireless from up to 250 stations without any software.


Allen-Bradley PowerFlex 750-Series Profibus DPV1 module

14 April, 2012

The PowerFlex 750-Series Profibus DPV1 module enables users to integrate the Allen-Bradley PowerFlex 750-Series AC drives with Profibus networks through a standard D89 connector.


Phoenix Contact SHDSL high-speed modems for ethernet and Profibus

05 April, 2012

Phoenix Contacts’s SHDSL high-speed modems for ethernet and Profibus have two DSL ports to quickly and simply commission point-to-point connections, link redundancy, as well as line and star topologies.


Secomea SiteManager secure remote access solution

16 February, 2012

Providing more than a VPN or RDP, the Secomea secure remote access solution creates a transparent yet highly secure channel over the internet or mobile network between the client terminal and the destination network or host.


Balluff distributed modular I/O system

02 February, 2012 by

Balluff’s new generation of distributed modular I/O can be used in a cost-effective way to replace standard slice I/O and distributed I/O solutions. Offering IP67 protection and industry-standard connectors, many types of control data can be collected. Using standard 3-conductor cables, up to four slave devices can be connected to each master block, which communicates over the industrial ethernet network to the controller.


Quatech AirborneAP APXG-Q5420 wireless device server

30 December, 2011 by

The Quatech AirborneAP APXG-Q5420 enables M2M equipment to become the centre of a self-sufficient Wi-Fi network. The server allows easy access to serial data and network resources from Wi-Fi enabled devices, including laptops, tablets and handhelds powered by Android, iOS, or Windows.


Westermo Lynx DSS serial-to-ethernet switches

14 November, 2011 by

Lynx DSS is an industrial ethernet switch for managing applications with a combination of IP and serial connections. Providing a single unit solution, the Lynx DSS replaces the need for multiple units. Powered by an updated version of the Westermo WeOS operating system, it provides serial-to-ethernet connectivity and support for dual serial networks, modem replacement functionality, and Modbus gateways. Legacy devices can be connected via two serial ports (RS-232 and RS-232/RS-422/485).


ProSoft ProLinx EtherNet/IP to IEC 60870-5-104 Client gateway

08 October, 2011 by

The ProLinx EtherNet/IP to IEC 60870-5-104 client gateway is designed to provide a fast and flexible solution for enabling an EtherNet/IP network to monitor and control data from up to four remote IEC 60870-5-104 servers.


Schneider Electric Modicon Quantum Ethernet I/O (QEIO) solution

30 September, 2011 by

The Modicon Quantum Ethernet I/O (QEIO) solution is designed to offer a flexible architectural design needed to safely optimise network processes, and supports both remote I/O and distributed I/O.


Beckhoff EP5101 EtherCAT Box incremental encoder interface

15 September, 2011 by

The EP5101 EtherCAT Box is an interface for the direct connection of incremental encoders with differential inputs (RS485). Due to the optional interpolating microincrements functionality, the EP5101 can supply more precise axis positions for dynamic axes. It supports the synchronous reading of the encoder value together with other input data in the EtherCAT system via high-precision EtherCAT distributed clocks.


Moxa VPort 461 industrial video server

18 August, 2011 by

Moxa’s VPort 461 industrial video server now complies with ONVIF, which allows the product to be easily integrated with any existing IP-based security system, enhancing interoperability and deployment flexibility. ONVIF (Open Network Video Interface Forum, www.onvif.org) is a non-profit organisation that aims to develop a global open standard for the interface of IP-based security products.


  • All content Copyright © 2020 Westwick-Farrow Pty Ltd