ICP DAS ECAT-2610 EtherCAT to Modbus RTU gateway

Wednesday, 24 October, 2018 | Supplied by: ICP Electronics Australia


The ICP DAS ECAT-2610 is an EtherCAT to Modbus RTU gateway. Serial RS232/422/485-based industrial devices and equipment can be interfaced to an EtherCAT-based control system without the need for any changes to the device.

The gateway performs an intelligent protocol conversion and presents the serial data to the Master PLC/controller as easily processed I/O data.

The device supports maximum 256-word input and 256-word output data, and a maximum serial data rate of 115,200 bps, allowing system integrators to retrofit older automation devices into modern EtherCAT communication systems. It requires no hardware or software changes to be made to the connected device. It is compatible with all PLCs with EtherCAT support, and now special Function Blocks are required.

Online: www.icp-australia.com.au
Phone: 02 9457 6011
Related Products

Emerson Wireless 1410S gateway and 781S smart antenna

Emerson has released upgrades to its Emerson Wireless 1410S Gateways, along with an updated 781S...

Acromag Model NT2140 discrete AC input module

The Model NT2140 Discrete AC Input Module is designed to sense the on/off power status of...

Rockwell Automation EtherNet/IP in-cabinet solution

The EtherNet/IP In-cabinet Solution is designed to meet the growing demand for smarter, faster...


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd