Turck has expanded its BL20 I/O system with a gateway for serial Modbus communication, supporting both Modbus RTU as well as the ASCII protocol over RS485 and RS232.
The Secomea remote access system starter pack includes everything necessary to provide a remote connection to a PLC, HMI or any programmable device, and is typically operational in 15 minutes.
Protection of traffic using OPC Classic protocol is almost impossible with traditional firewall rule sets, so the OPC Enforcer takes a different approach, dynamically opening only the TCP ports required for each allowed connection.
The Axioline F family of I/O products, designed for installation in control cabinets, is being expanded further with additional I/O components and function modules, and the devices can now be operated on additional key networks. Devices for connecting to EtherCAT and Modbus/TCP (UDP) networks now supplement the bus couplers for Profinet and Sercos 3. An additional bus coupler also enables connection to the Profibus fieldbus system.
The BusWorks XT Series multichannel discrete contact sensor and relay output modules offer a safe, isolated interface between high-energy field devices and sensitive control system I/O modules.
The Lantronix xDirect device server is a compact serial-to-ethernet device server that provides quick and easy connectivity to virtually any device or machine with a serial interface.
The IED-4020 is an industrial ethernet serial device server that can be used to remotely configure, monitor and manage the operation of PLCs, process controls, power monitoring equipment, barcode scanners and other factory floor serial devices.
Secomea has expanded the range of 3G SiteManager units to include models 1439 and 3439 with four LAN ethernet ports.
The Wolverine DDW-142 allows effective ethernet networks to be created over long distances (up to 15 km) at data rates up to 15.3 Mbps on a single twisted pair cable.
The MGate 5101-PBM-MN gateway provides a communication portal between Profibus devices (such as Profibus drives or instruments) and Modbus TCP hosts.
The PTC-101-M12 series meets critical EMC, shock, vibration and environmental requirements in compliance with the EN 50121-4 standard.
The FGEN features Turck’s multiprotocol technology, which was developed to simplify industrial ethernet for distributed I/O.
The Advantech ADAM-2000Z series I/O modules use the IEEE 802.15.4 standard I/O and latest sensor technology while supporting 2.4 GHz mesh networking.
The microSpider Satellite is a low-cost, low-power solution for remote monitoring and data logging which uses the Iridium satellite network Short Burst Data service.
Designed to provide a reliable communication solution for on-machine, modular I/O applications, the BL67 is suitable for use in environments where conditions may not be conducive to traditional I/O.