Coupling pads for ultrasonic flowmeters
08 July, 2008 | AMS Instrumentation & Calibration Pty Ltd
Flexim’s small black pads add to the long-term durability of clamp-on ultrasonic flowmeters.
Valve and pipe labelling system
08 July, 2008 | Air & Hydraulic Systems Pty Ltd
Praher Valves has released a colour-coded labelling system for valves and pipe clips.
DC motors with integrated drives
08 July, 2008 | M Rutty & Co Pty Ltd
The GR53 and GR63 motors from Dunkermotoren are cost-effective DC commutator motors with comprehensive digital electronic regulation and control.
2-wire level switch
08 July, 2008 | AMS Instrumentation & Calibration Pty Ltd
The NuTec LS2000 level switch from Fluid Components International is designed for 2-wire, 4-20 mA loop power that allows the LS2000 to serve as a drop-in replacement for other 2-wire mechanical float and paddle switches without any wiring modifications during plant retrofit projects, which simplifies installation and reduces cost. The LS2000 is also available for 115/230 VAC or 24 VDC input power and a 6 A relay output.
Flowmeters for water treatment
08 July, 2008 | H2O Rx
The materials used in the construction of Titan flowmeters are of the highest standard and include AISI316 stainless steel, engineering plastics and sapphire. Extensive use is made of plastic materials such as PEEK and PVDF, also chosen for their inherently good chemical resistance.
Stepper motors
08 July, 2008 | Festo Pty Ltd
The EMMS-ST range of stepper motors supplements the CMMS-ST range of drives.
Safety system
08 July, 2008 | HIMA Australia
The XMR system architecture of the HIMax safety system allows users to adjust the redundancy of individual modules to the requirements of the differing process loops. XMR refers to the degree of modular redundancy in the system, with ‘x’ assuming any value between one and four.
Acrylic flowmeter
08 July, 2008 | Kobold Instruments Pty Ltd
The KFR acrylic flowmeter offers a balance between low-cost, accuracy and range availability. Bridging the micro-flow and large flow ranges, this meter can provide an effective solution to many industrial applications.
Turbine wheel flowmeter
08 July, 2008 | Kobold Instruments Pty Ltd
The turbine wheel flowmeter type DPE operates according to the well-known blade wheel principle. Numerous liquid media of low viscosity, ranging from distilled water to fuels, alcohol and various chemicals can be monitored with this robust measuring instrument.
Linear motors and slide components
08 July, 2008 | Motion Technologies Pty Ltd
Linmot linear motors and Gimatic slide parts and components are designed for most end-of-arm tooling needs and robotic systems.
Industrial PC with Profinet
08 July, 2008 | Siemens Ltd
Siemens has equipped the main boards of its rugged industrial PC family with a Profinet interface. Designed as a 3-port switch, the interface supports isochronous real time and integrates the Siemens PC into Profinet networks.
Compact stepper drive
08 July, 2008 | Automated Motion Systems Pty Ltd
The Plus-B series of stepper motor drives is suitable for high-power single- and dual-axis motion control applications where high speed and resolution are required. They are AC powered and require only a mains transformer and a suitable controller with step and direction output signals.
Fieldbus junction bricks
08 July, 2008 | Turck Australia Pty Ltd
The JRBS junction bricks for Foundation Fieldbus provide quick and easy connection of multiple devices to the main fieldbus trunk. JRBS junction bricks are available with 4, 6, 8, 10 or 12 ports and feature removable terminals for simple, efficient installation and wiring modification in tight spaces.
Red Lion CUB5 Series analog panel meters
08 July, 2008 | Control Logic Pty Ltd
Red Lion has announced its CUB5 Series analog panel meters that have a footprint that is 30% smaller than conventional 48 x 96 mm meters.
Micro-assembly station
08 July, 2008 | Assembly Technologies Pty Ltd
The Micro-Assembly-System from Deprag Schulz is 450 x 802 x 680 mm in width, depth and height and is lightweight, allowing uncomplicated transportation. The working range is 176 x 176 x 80 mm with a position accuracy of ±1 µm.
