Flow meter
05 October, 2008 | ABB Australia Pty Ltd
Part of ABB’s FlowMaster family, ProcessMaster incorporates features providing users enhanced performance with reduced complexity. Available in sizes 3 to 2000 mm, the ProcessMaster range offers a wide choice of liner and electrode options, enabling it to meet the needs of demanding applications.
Dodge MagnaGear XTR gear reducers
05 October, 2008 | Baldor Australia Pty Ltd
The Dodge MagnaGear XTR family of gear reducers delivers high power and torque densities of up to 450,000 Nm in a compact and versatile footprint to enable systems engineers to achieve substantial weight- and space-saving designs.
Three-way ball valve
01 October, 2008 | GF Piping Systems
The type 543 3-way ball valve is soon to be available in sizes DN10 to DN50 and is offered with a broad range of accessories for all variations, from manual valves to automatic valves.
Pressure switch/transmitter
01 October, 2008 | AMS Instrumentation & Calibration Pty Ltd
The Noshok 800 Series indicating pressure switch/pressure transmitter provides continuous pressure monitoring and allows programming of the setpoints without pressurising.
Non-ball lead screws
01 October, 2008 | Motion Technologies Pty Ltd
Non-ball lead screws by Kerk Motion Products can be designed to self-lock and prevent back driving in vertical applications, without an external brake, unlike traditional ball screws.
Vibrating fork level switch
01 October, 2008 | Kobold Instruments Pty Ltd
The NWS liquid level switch is designed as a 2- and 3-wire switch and can be universally used in vessels and pipelines. The NWS operates on the tuning fork principle in air at resonance frequency. A piezoelectric crystal is used for excitation of oscillations and for monitoring the actual oscillation frequency.
Single-board reconfigurable I/O platform
17 September, 2008 | National Instruments Aust Pty Ltd
National Instruments has released Single-Board RIO devices that offer engineers and scientists a low-cost, integrated hardware option for deploying embedded control and data acquisition applications for OEMs and machine builders.
High-speed data acquisition module
17 September, 2008 | Interworld Electronics and Computer Industries
Interworld Electronics has available the 104-AIO16A multifunction analog I/O board. Its features include 10 analog input ranges, a 1024 sample FIFO buffer, onboard over sampling for additional noise reduction and auto calibration to reduce converter offset and gain errors.
Electrically insulated bearings
05 September, 2008 | Statewide Bearings
Bearing manufacturer NKE offers electrically insulated rolling bearings in standard sizes and in different design variations. Electrically insulated bearings provide optimal protection against bearing damage caused by electro corrosion.
Brushless DC servomotor
05 September, 2008 | ERNTEC Pty Ltd
The Faulhaber Series 2057 motor is fitted with a high-energy rare earth magnet which results in a very responsive mechanical time constant of only 8 ms. The skew winding in combination with the laminated stator also provides good heat dissipation and high overload capability.
Hall sensor amplifier
05 September, 2008 | M Rutty & Co Pty Ltd
With fully programmable features, this hall sensor amplifier is specifically engineered to optimise the performance of Portescap’s brushless motors in applications where efficiency, high acceleration or safety are of primary significance. All inputs and outputs are clearly identified to facilitate easy startup in less than 10 mins.
Miniature stepper motor
05 September, 2008 | ERNTEC Pty Ltd
With an outer diameter of 6 mm, a length of 9.3 mm and weighing 1.4 g, the ADM 0620 is claimed to be the smallest two-phase miniature stepper motor in the world.
Inclinometer
05 September, 2008 | Automated Control Pty Ltd
ASM has introduced the PTAS2 inclinometer series with ranges from ±15 to ±180° in a robust, IP68-rated stainless steel housing. This sensor has been tested to withstand harsh conditions, which makes it suitable for a wide range of applications such as factory automation machines and robotics, mobile cranes, draw bridges, adjustable platforms and off-highway construction equipment.
Draw wire position transducers
05 September, 2008 | Applied Measurement Australia
WayCon Positionsmesstechnik is a manufacturer of draw wire position transducers for industrial use. Due to its small overall size, short assembly time and possible customisation, the SX sensor technology is a cost-effective and flexible solution for a wide range of industrial applications.
Density meter
05 September, 2008 | Kobold Instruments Pty Ltd
Whether dealing with the concentration or the mixing ratio, the density of liquid media plays an important role in many processes such as in the food industry or chemistry.
