Low-power RTUs
09 June, 2009 | Ovarro
Semaphore has announced first shipments of updated, low-power Kingfisher SCADA system RTU products. The Kingfisher LP-2 and LP-3 are fully compatible with the LP-1 model, which they replace.
Light towers
09 June, 2009 | Direct Automation Pty Ltd
EMA LED multi-layer light towers are designed to monitor status and alarm conditions. They are available in 70 mm diameter and are easier to install, due to the modular twist-and-lock design. Each light element can be mounted or replaced without the need for any tools. Each of the light modules can be user selectable for either continuous or flashing, which reduces inventory.
Linear actuators
09 June, 2009 | Motion Technologies Pty Ltd
The Linmot linear actuators were originally conceived to replace air cylinders where more than two positions were needed. Rated speeds over 3 m/s and peak forces up to 585 N are available now, with a 1200 N model coming later this year.
Vented water level data logger
09 June, 2009 | Dwyer Omega (Aust) Pty Ltd
The model LDL2-030 vented water level data logger has a vented cable and end cap to allow it to automatically compensate for atmospheric pressure fluctuations.
Hygienic bag dump station
09 June, 2009 | Flexicon Corporation (Australia) Pty Limited
The W-0697 hygienic bag dump station for pneumatic conveying systems collects dust created during manual dumping of bulk materials from bags, boxes, drums and other containers and allows rapid, tool-free wash down.
Eco-footprint management tool
09 June, 2009 | IFS Australia
IFS has launched its Eco-footprint Management tool to provide organisations with control and transparency on the environmental impact of their operations. The tool offers customers an enterprise standard methodology to help them control costs and meet the need to prepare for compliance with environmental legislation.
Variable speed drives
09 June, 2009 | NHP Electrical Engineering Products Pty Ltd
NHP carries stock of the Santerno range of variable speed drives, which includes the Sinus Nano, Micro and Penta drives.
Food-grade ball valve
09 June, 2009 | Air & Hydraulic Systems Pty Ltd
The PVC ball valve series S6 from Praher Valves is available in sizes from DN10 to DN50, with ball seats in PE or PTFE and O-rings in FPM or EPDM.
Load cell
09 June, 2009 | Control Overload Pty Ltd
The KIMD-M load cell module is for harsh environments and heavy-duty applications and has a movable load point to allow for thermal expansion of the weigh system.
Heavy-duty rod locks
09 June, 2009 | Norman G Clark Pty Ltd
Nexen’s RLSS Series rod locks deliver good holding capabilities with low backlash for demanding linear motion control applications where high accuracy is required. The spring-engaged, air-released series — available in a wide array of standard and custom sizes — features a wide clamping surface to ensure high holding forces even during power/pressure loss.
Basic bulk bag filler
09 June, 2009 | Flexicon Corporation (Australia) Pty Limited
The Model BFB basic bulk bag filler performs low-capacity filling operations at minimal cost and can be upgraded with performance enhancements including a material delivery system integrated with the user’s process equipment or bulk storage vessels.
Thermal dispersion flow switches
09 June, 2009 | Control Components Pty Ltd
The Kayden line of products is based on the thermal dispersion principle of operation. The Classic 800 was conceived to meet the extreme demands of the oil and gas industries, and there are no moving parts to fail, no mechanical trim pots to adjust.
Low-power RTU
09 June, 2009 | Rockwell Automation Australia
Rockwell Automation has introduced an all-in-one controller with SCADA capabilities which is suitable for remote and harsh environments.
Polymer extrusion control system
09 June, 2009 | Tasman Machinery Pty Ltd
Dynisco Instruments has recently released the OPT.TROL polymer control system for control of extrusion lines. This system is designed for small to medium-sized extrusion lines and can either be equipped onto new extrusion lines or retrofitted to upgrade existing extrusion lines.
Pinpoint photoelectric sensors
09 June, 2009 | SICK Pty Ltd
Sick has released a range of photoelectric switches and photoelectric proximity switches in which pinpoint LED technology concentrates energy on a smaller area and increases the intensity of the light spot.
