Pinpoint photoelectric sensors
09 June, 2009 | SICK Pty Ltd
Sick has released a range of photoelectric switches and photoelectric proximity switches in which pinpoint LED technology concentrates energy on a smaller area and increases the intensity of the light spot.
Heavy-duty rod locks
09 June, 2009 | Norman G Clark Pty Ltd
Nexen’s RLSS Series rod locks deliver good holding capabilities with low backlash for demanding linear motion control applications where high accuracy is required. The spring-engaged, air-released series — available in a wide array of standard and custom sizes — features a wide clamping surface to ensure high holding forces even during power/pressure loss.
Polymer extrusion control system
09 June, 2009 | Tasman Machinery Pty Ltd
Dynisco Instruments has recently released the OPT.TROL polymer control system for control of extrusion lines. This system is designed for small to medium-sized extrusion lines and can either be equipped onto new extrusion lines or retrofitted to upgrade existing extrusion lines.
Load cell
09 June, 2009 | Control Overload Pty Ltd
The KIMD-M load cell module is for harsh environments and heavy-duty applications and has a movable load point to allow for thermal expansion of the weigh system.
Inline liquid density measurement
09 June, 2009 | Endress+Hauser Australia Pty Ltd
With Liquiphant M, Endress+Hauser has used the ‘vibrating fork’ principle of liquid level measurement to enable the accurate and in-situ measurement of liquid density. The resonant frequency of the Liquiphant M’s vibrating fork changes with the varying densities of the materials in which it is placed. This change is used to compute the density or concentration of the medium resulting in instantaneous, repeatable density measurements.
Low-power RTU
09 June, 2009 | Rockwell Automation Australia
Rockwell Automation has introduced an all-in-one controller with SCADA capabilities which is suitable for remote and harsh environments.
Thermal dispersion flow switches
09 June, 2009 | Control Components Pty Ltd
The Kayden line of products is based on the thermal dispersion principle of operation. The Classic 800 was conceived to meet the extreme demands of the oil and gas industries, and there are no moving parts to fail, no mechanical trim pots to adjust.
Temperature controllers with ladder logic
09 June, 2009 | Yokogawa Australia Pty Ltd
The UTAdvanced is a digital indicating controller with a sequence control function, which offers greatly improved measurement, display, operation, control and networking functions. It also eliminates the need for peripheral devices and associated wiring.
Basic bulk bag filler
09 June, 2009 | Flexicon Corporation (Australia) Pty Limited
The Model BFB basic bulk bag filler performs low-capacity filling operations at minimal cost and can be upgraded with performance enhancements including a material delivery system integrated with the user’s process equipment or bulk storage vessels.
Evcco FRAS polymer safety conduit
09 June, 2009 | Albatech Pty Ltd
The Evcco FRAS polymer safety conduit offers a halogen-free flame-retardant (HFFR) polymer formulation developed as an alternative to PVC and metal conduits.
M9200 thermal imagers
09 June, 2009 | W&B Instruments Pty Ltd
Mikron Infrared has released the M9200 series of process thermal imagers. The imagers operate at short wavelength and are specifically designed for high temperature applications up to 3000 °C with an accuracy of ±0.5 of reading.
Wireless DAQ modules and enclosures
09 June, 2009 | National Instruments Aust Pty Ltd
National Instruments has announced six wireless and ethernet data acquisition modules and two ingress protection (IP) enclosures for remote monitoring and control in harsh environments.
Siemens process control system
09 June, 2009 | Siemens Ltd
Siemens has released version 7.1 of its Simatic PCS 7 process control system, with additions relating to virtually all function areas.
Portescap hall sensor amplifier
09 June, 2009 | M Rutty & Co Pty Ltd
Portescap has introduced the RoHS-compliant EBL-H-50-03 four-quadrant amplifier. With fully programmable features, this hall sensor amplifier is specifically engineered to optimise the performance of Portescap brushless motors in applications where efficiency, high acceleration or safety are of primary significance. All inputs and outputs are clearly identified to facilitate easy start-up in less than 10 minutes.
Mueller Accu-Therm range of heat exchangers
09 June, 2009 | Teralba Industries Pty Ltd
The Mueller Accu-Therm range of plate heat exchangers has been expanded to include all stainless steel components, to provide industry and manufacturers throughout Australia and New Zealand with the option of hygienic, maintenance-free heat exchangers.
